Bostik Boscoseal PU-X is a single component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
FEATURES AND BENEFITS :
• Easy and fast application
• Provides a seamless waterproofing membrane
• Highly resistant to abrasion, water and root penetration.
• Mechanical properties unaffected by UV and other weather conditions. (Consult Bostik for optimum results)
• Crack bridging capability up to 2mm
• Provides excellent thermal resistance over a temperature span of -30°C to +90°C
• Resistant to salty water, aqueous solution, bases, diluted acids, aliphatic solvents, benzene and mineral oils.
• Impregnates by penetrating deeply into all mineral and concrete surfaces with high adherence
• Fills the non-structural capillary cracks by
decreasing water absorbency of the concrete construction.
• Hardens the upper surface of the concrete by deeply penetrating into the surfaces.
• Suitable onto the old bituminous membranes and asphalt felts (e.g. APP and SBS), PVC, EPDM membranes using special type of primer (Consult Bostik Technical Dept.)
APPLICATION INSTRUCTION :
• For roof waterproofing solutions in both new construction and refurbishment projects (exposed or concealed)
• Green roofing for energy efficiency
• Flower beds and planter boxes
• Parking areas and vehicular traffic system
• Bridge decks, balconies, bleachers and terraces
• Wet areas such as toilets, bathrooms, kitchens as an under tiling membrane
RISK SIGNS :
R23/24/25: Poisonous when inhaled, swallowed and contacted with skin.
SECURITY SIGNS :
S2: Keep out of reach of children
S3: Keep cool
S9: Keep the package dry
S26: Rinse in water thoroughly when contacted with eyes and consult a doctor
S28: Rinse with water thoroughly when contacted with skin and consult a doctor
S29: Do not throw in the drain
S36/37/39: Wear suitable protective coating, protective gloves and glasses/mask during the operation
LIMITS :
• Substrate moisture should be at most 5%
• Concrete slab must be minimum of 4 weeks old
• Minimum substrate temperature +10°C
• Maximum substrate temperature +30°C
• Maximum air humidity 85% r.h.
• Observe dew point temperature
• For best result, maximum thickness of Boscoseal PU-X is 0.5 mm dry film thickness per layer
• Newly applied surfaces should be protected from water minimum of 4 hours
STORAGE :
• They should be protected for water, direct sunlight and adverse weather condition
• They should be kept dry and coolon wooden pallets at between +10°C to 25°C in moisture free conditions.
• The opened products should be closed immediately and consumed first.
• Maximum 3 buckets should be stocked on each day.
• Shelf life is maximum 9 months conditional to complying with abovementioned storage conditions.
Bostik Boscoseal PU-X is a single component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
FEATURES AND BENEFITS :
• Easy and fast application
• Provides a seamless waterproofing membrane
• Highly resistant to abrasion, water and root penetration.
• Mechanical properties unaffected by UV and other weather conditions. (Consult Bostik for optimum results)
• Crack bridging capability up to 2mm
• Provides excellent thermal resistance over a temperature span of -30°C to +90°C
• Resistant to salty water, aqueous solution, bases, diluted acids, aliphatic solvents, benzene and mineral oils.
• Impregnates by penetrating deeply into all mineral and concrete surfaces with high adherence
• Fills the non-structural capillary cracks by
decreasing water absorbency of the concrete construction.
• Hardens the upper surface of the concrete by deeply penetrating into the surfaces.
• Suitable onto the old bituminous membranes and asphalt felts (e.g. APP and SBS), PVC, EPDM membranes using special type of primer (Consult Bostik Technical Dept.)
APPLICATION INSTRUCTION :
• For roof waterproofing solutions in both new construction and refurbishment projects (exposed or concealed)
• Green roofing for energy efficiency
• Flower beds and planter boxes
• Parking areas and vehicular traffic system
• Bridge decks, balconies, bleachers and terraces
• Wet areas such as toilets, bathrooms, kitchens as an under tiling membrane
RISK SIGNS :
R23/24/25: Poisonous when inhaled, swallowed and contacted with skin.
SECURITY SIGNS :
S2: Keep out of reach of children
S3: Keep cool
S9: Keep the package dry
S26: Rinse in water thoroughly when contacted with eyes and consult a doctor
S28: Rinse with water thoroughly when contacted with skin and consult a doctor
S29: Do not throw in the drain
S36/37/39: Wear suitable protective coating, protective gloves and glasses/mask during the operation
LIMITS :
• Substrate moisture should be at most 5%
• Concrete slab must be minimum of 4 weeks old
• Minimum substrate temperature +10°C
• Maximum substrate temperature +30°C
• Maximum air humidity 85% r.h.
• Observe dew point temperature
• For best result, maximum thickness of Boscoseal PU-X is 0.5 mm dry film thickness per layer
• Newly applied surfaces should be protected from water minimum of 4 hours
STORAGE :
• They should be protected for water, direct sunlight and adverse weather condition
• They should be kept dry and coolon wooden pallets at between +10°C to 25°C in moisture free conditions.
• The opened products should be closed immediately and consumed first.
• Maximum 3 buckets should be stocked on each day.
• Shelf life is maximum 9 months conditional to complying with abovementioned storage conditions.
Bostik Boscoseal PU-X is a single component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
FEATURES AND BENEFITS :
• Easy and fast application
• Provides a seamless waterproofing membrane
• Highly resistant to abrasion, water and root penetration.
• Mechanical properties unaffected by UV and other weather conditions. (Consult Bostik for optimum results)
• Crack bridging capability up to 2mm
• Provides excellent thermal resistance over a temperature span of -30°C to +90°C
• Resistant to salty water, aqueous solution, bases, diluted acids, aliphatic solvents, benzene and mineral oils.
• Impregnates by penetrating deeply into all mineral and concrete surfaces with high adherence
• Fills the non-structural capillary cracks by
decreasing water absorbency of the concrete construction.
• Hardens the upper surface of the concrete by deeply penetrating into the surfaces.
• Suitable onto the old bituminous membranes and asphalt felts (e.g. APP and SBS), PVC, EPDM membranes using special type of primer (Consult Bostik Technical Dept.)
APPLICATION INSTRUCTION :
• For roof waterproofing solutions in both new construction and refurbishment projects (exposed or concealed)
• Green roofing for energy efficiency
• Flower beds and planter boxes
• Parking areas and vehicular traffic system
• Bridge decks, balconies, bleachers and terraces
• Wet areas such as toilets, bathrooms, kitchens as an under tiling membrane
RISK SIGNS :
R23/24/25: Poisonous when inhaled, swallowed and contacted with skin.
SECURITY SIGNS :
S2: Keep out of reach of children
S3: Keep cool
S9: Keep the package dry
S26: Rinse in water thoroughly when contacted with eyes and consult a doctor
S28: Rinse with water thoroughly when contacted with skin and consult a doctor
S29: Do not throw in the drain
S36/37/39: Wear suitable protective coating, protective gloves and glasses/mask during the operation
LIMITS :
• Substrate moisture should be at most 5%
• Concrete slab must be minimum of 4 weeks old
• Minimum substrate temperature +10°C
• Maximum substrate temperature +30°C
• Maximum air humidity 85% r.h.
• Observe dew point temperature
• For best result, maximum thickness of Boscoseal PU-X is 0.5 mm dry film thickness per layer
• Newly applied surfaces should be protected from water minimum of 4 hours
STORAGE :
• They should be protected for water, direct sunlight and adverse weather condition
• They should be kept dry and coolon wooden pallets at between +10°C to 25°C in moisture free conditions.
• The opened products should be closed immediately and consumed first.
• Maximum 3 buckets should be stocked on each day.
• Shelf life is maximum 9 months conditional to complying with abovementioned storage conditions.
Indonesia
Australia
Hong Kong SAR
Malaysia
New Zealand
Philippines
Singapore
