- Indonesia
MAPECOAT EPN 24 AP
Low Embodied Carbon
Sustainable Manufacturing Process
Application area | : | Flooring |
Application | : | Industrial flooring for chemical plants, pulp and paper mills, workshops, hangers | Protective coating of purification tanks, storage tanks, silos and bund areas | Protection of discharge tanks for oil and hydrocarbons |
Appearance | : | Liquid |
Colour Of The Mix | : | Standard RAL colour range |
Storage | : | 12 months in its original unopened container, store in a dry place at 25 °C |
Usage | : | Industrial flooring |
Packaging | : | 5 kg units (Component A: 4 kg + Component B: 1 kg) |
Solids Content | : | 100 % |
Mixing Ratio (By Weight) | : | Comp. A : comp. B = 4 : 1 |
Estimated Dosage Per mm Thickness | : | 1.4 kg |
Consistency Of The Mix | : | Flowable |
Substrate Temperature Relative To Dew Point | : | ≥ 3 °C above dew point |
Recommended Application Temperature Range | : | Minimum +5 °C | Maximum +35 °C |
Pot-Life At 28 ˚C | : | 15 mins |
Minimum Overcoating Time At 28 ˚C | : | 18 hours |
Set To Light-Foot Traffic At 25 ˚C | : | 20 hours |
Final Hardening Time At 25 ˚C | : | 7 days |
Compressive Strength | : | 45 N/ mm² |
Flexural Strength | : | 20 N/ mm² |
Tensile Strength | : | 12 N/ mm² |
Bond Strength | : | > 2.0 N/ mm² (100 % concrete failure) |
Shore D Hardness | : | 75 - 82 |
Abrasion Resistance By Taber | : | 37 mg |