- Indonesia
MAPEFLOOR FINISH 415
Material | : | Plastic | Liquid |
Colour | : | Brown |
Type | : | Protective |
Benefit | : | Attractive finish | Good level of elasticity | Good defect-covering properties | High resistance to wear and abrasion | Easy to apply | Good chemical resistance to oil and fuel in general |
Colour details | : | Comp A: RAL Colours | Comp B: Brown |
Product type | : | Polyurethane coating |
Weight | : | 12.5 kg |
Packaging | : | 12.5 kg kit (Component A: 10 kg | Component B: 2.5 kg) |
Shelf life | : | 12 months |
Set To Foot Traffic At +23 °C | : | 24 hours |
Complete Hardening Time At +23 °C | : | 3 days |
Application Temperature | : | +10 °C to +30 °C |
Dust Dry At +23 °C | : | 90 mins |
Workability Time | : | Approx. 20 mins |
Pot Life | : | 10 mins. (+ 15 %) to reach +40 °C |
Viscosity Of Mix | : | 2000 - 2500 mPa·s |
Density Of Mix | : | 1.35 kg/ m³ |
Consistency Of Mix | : | Liquid | Paste |
Colour Of Mix | : | Depending on RAL colour chosen |
Mixing Ratio | : | Comp A : Comp B = 80 : 20 |
Density | : | 1.40 g/ cm³ | 1.20 g/ cm³ |
Brookfield Viscosity At +23 °C | : | 6400 ÷ 9600 mPa-s (# 4 - 10 rpm) | 70-110 mPa-s (# 1 - 50 rpm) |
Consistency | : | Thick liquid (paste) | Liquid |
Elongation At Failure After 7 Days At +23 °C | : | 70 % |
Tear Strength After 7 Days At +23 °C | : | 90 N/ mm |
Tensile Strength After 7 Days At +23 °C | : | 15 N/ mm² |
Taber Abrasion Resistance | : | 90 mg |
Shore A Hardness | : | 90 |
Shore D Hardness | : | 65 |
Storage | : | 12 months and covered area at a temperature of +15 °C to +25 °C |