HYDRO BARRIER is a thin, load bearing, self-curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproof/anti-fracture membrane. HYDRO BARRIER can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner.
Equipped with Microban Anti-Microbial Protection
Product #: 9256-XXXX-X
Waterproofing/Anti-Fracture Fabric sold separately.
Item# S-09235-NF-19
Features & Benefits
• Allows for flood testing in 24 hours^
• Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
• Changes in color from a light blue to darker blue when cured
• Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
• “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
• Exceeds ANSI A118.10 and A118.12
• IAPMO approved equipped with anti-microbial technology.
• Fast curing; allows foot traffic in 4–6 hours @ 70°F (21°C), 50% RH
• Lighter color for ease of inspection
• Safe—no solvents and non-flammable
• Install tile, brick and stone directly onto membrane
• ^When cured 70°F (21°C) or higher at 50% RH lower temperature at higher RH will require long cure times.
HYDRO BARRIER is a thin, load bearing, self-curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproof/anti-fracture membrane. HYDRO BARRIER can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner.
Equipped with Microban Anti-Microbial Protection
Product #: 9256-XXXX-X
Waterproofing/Anti-Fracture Fabric sold separately.
Item# S-09235-NF-19
Features & Benefits
• Allows for flood testing in 24 hours^
• Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
• Changes in color from a light blue to darker blue when cured
• Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
• “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
• Exceeds ANSI A118.10 and A118.12
• IAPMO approved equipped with anti-microbial technology.
• Fast curing; allows foot traffic in 4–6 hours @ 70°F (21°C), 50% RH
• Lighter color for ease of inspection
• Safe—no solvents and non-flammable
• Install tile, brick and stone directly onto membrane
• ^When cured 70°F (21°C) or higher at 50% RH lower temperature at higher RH will require long cure times.
HYDRO BARRIER is a thin, load bearing, self-curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproof/anti-fracture membrane. HYDRO BARRIER can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner.
Equipped with Microban Anti-Microbial Protection
Product #: 9256-XXXX-X
Waterproofing/Anti-Fracture Fabric sold separately.
Item# S-09235-NF-19
Features & Benefits
• Allows for flood testing in 24 hours^
• Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
• Changes in color from a light blue to darker blue when cured
• Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
• “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
• Exceeds ANSI A118.10 and A118.12
• IAPMO approved equipped with anti-microbial technology.
• Fast curing; allows foot traffic in 4–6 hours @ 70°F (21°C), 50% RH
• Lighter color for ease of inspection
• Safe—no solvents and non-flammable
• Install tile, brick and stone directly onto membrane
• ^When cured 70°F (21°C) or higher at 50% RH lower temperature at higher RH will require long cure times.
United States
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
