Ceramica is a refined proposal to accompany spaces with a contemporary style, through elegant light effects that soften the surfaces. These elegant glazed tiles are obtained by wire drawing - a production method which, in addition to preserving its authenticity, makes each piece different from the other and available in a 5.3x19.8 cm format.
The collection has a range of eight colors, including white and ivory, three different shades of gray and three spicy earth tones: a neutral palette, suitable for use in any type of environment.
Specification
The collection is:
– 8 glossy colors
– 8 tone sur tone grout
– 1 contrast grout
Sleaning at the end of installation:
CEMENT-BASED GROUT: Buffered acid (e.g. DETERDEK PRO by FILA, or similar). Wet the floor with water, dilute the product 1:5 with water and pour it on the floor. Wait for 2 or 3 minutes then use a white scotch brite pad and rinse well with clean water.
EPOXY GROUT: Alkaline detergent (e.g. FILA CR10 by FILA). FILA CR10: apply pure, wait for 30 minutes then use a green scotch brite pad.
SILICONE: Solvent for silicone (e.g. FILA ZERO SIL.). Pour it straight onto the stain, wait for 20 minutes and remove the mark using scotch brite.
PAINT: Can usually be removed using water, but if resin-based paints or particular enamels have been used, it is best to ask the manufacturer which solvent is most suitable.
RUST: stain remover es. FILA NO RUST. Apply the product onto the stain, leave for 15 minutes, remove the residue and rinse thoroughly.
General cleaning (installed tiles):
You are recommended to use ordinary neutral detergent diluted in water. Avoid using acid or alkaline products, waxes and/or impregnants.
During ordinary cleaning it is recommended to use extremely abrasive items (such as scourers and iron or steel sponges) as little as possible. This recommendation must be adhered to rigorously in the case of tiles with a glossy surface finishing as they are more susceptible to the risk of scuffs, scratches and loss of shine, etc. In the event of heavy dirt or particularly textured surfaces, use an alkaline detergent and rinse after washing.
Ceramica is a refined proposal to accompany spaces with a contemporary style, through elegant light effects that soften the surfaces. These elegant glazed tiles are obtained by wire drawing - a production method which, in addition to preserving its authenticity, makes each piece different from the other and available in a 5.3x19.8 cm format.
The collection has a range of eight colors, including white and ivory, three different shades of gray and three spicy earth tones: a neutral palette, suitable for use in any type of environment.
Specification
The collection is:
– 8 glossy colors
– 8 tone sur tone grout
– 1 contrast grout
Sleaning at the end of installation:
CEMENT-BASED GROUT: Buffered acid (e.g. DETERDEK PRO by FILA, or similar). Wet the floor with water, dilute the product 1:5 with water and pour it on the floor. Wait for 2 or 3 minutes then use a white scotch brite pad and rinse well with clean water.
EPOXY GROUT: Alkaline detergent (e.g. FILA CR10 by FILA). FILA CR10: apply pure, wait for 30 minutes then use a green scotch brite pad.
SILICONE: Solvent for silicone (e.g. FILA ZERO SIL.). Pour it straight onto the stain, wait for 20 minutes and remove the mark using scotch brite.
PAINT: Can usually be removed using water, but if resin-based paints or particular enamels have been used, it is best to ask the manufacturer which solvent is most suitable.
RUST: stain remover es. FILA NO RUST. Apply the product onto the stain, leave for 15 minutes, remove the residue and rinse thoroughly.
General cleaning (installed tiles):
You are recommended to use ordinary neutral detergent diluted in water. Avoid using acid or alkaline products, waxes and/or impregnants.
During ordinary cleaning it is recommended to use extremely abrasive items (such as scourers and iron or steel sponges) as little as possible. This recommendation must be adhered to rigorously in the case of tiles with a glossy surface finishing as they are more susceptible to the risk of scuffs, scratches and loss of shine, etc. In the event of heavy dirt or particularly textured surfaces, use an alkaline detergent and rinse after washing.
Ceramica is a refined proposal to accompany spaces with a contemporary style, through elegant light effects that soften the surfaces. These elegant glazed tiles are obtained by wire drawing - a production method which, in addition to preserving its authenticity, makes each piece different from the other and available in a 5.3x19.8 cm format.
The collection has a range of eight colors, including white and ivory, three different shades of gray and three spicy earth tones: a neutral palette, suitable for use in any type of environment.
Specification
The collection is:
– 8 glossy colors
– 8 tone sur tone grout
– 1 contrast grout
Sleaning at the end of installation:
CEMENT-BASED GROUT: Buffered acid (e.g. DETERDEK PRO by FILA, or similar). Wet the floor with water, dilute the product 1:5 with water and pour it on the floor. Wait for 2 or 3 minutes then use a white scotch brite pad and rinse well with clean water.
EPOXY GROUT: Alkaline detergent (e.g. FILA CR10 by FILA). FILA CR10: apply pure, wait for 30 minutes then use a green scotch brite pad.
SILICONE: Solvent for silicone (e.g. FILA ZERO SIL.). Pour it straight onto the stain, wait for 20 minutes and remove the mark using scotch brite.
PAINT: Can usually be removed using water, but if resin-based paints or particular enamels have been used, it is best to ask the manufacturer which solvent is most suitable.
RUST: stain remover es. FILA NO RUST. Apply the product onto the stain, leave for 15 minutes, remove the residue and rinse thoroughly.
General cleaning (installed tiles):
You are recommended to use ordinary neutral detergent diluted in water. Avoid using acid or alkaline products, waxes and/or impregnants.
During ordinary cleaning it is recommended to use extremely abrasive items (such as scourers and iron or steel sponges) as little as possible. This recommendation must be adhered to rigorously in the case of tiles with a glossy surface finishing as they are more susceptible to the risk of scuffs, scratches and loss of shine, etc. In the event of heavy dirt or particularly textured surfaces, use an alkaline detergent and rinse after washing.
United States
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
