PF30

Applications suited to

:

Retaining walls and carparks | DDA access ramps and stairs | Accommodation units | Sporting facilities and stadiums | Public transport and sightseeing | Fire and access stairs | Footbridges and culverts | Loading bays and mezzanines

Clamp fittings material

:

Malleable Cast iron

Clamp fittings protective coating

:

Hot-dip Galvanized with unique dual protective coating on locking screw threads

Clamp locking screws material

:

Stainless Steel (304)

Concrete fixings

:

M12 galvanized mechanical concrete anchor

Optional protective coating

:

Powder coating and paint specs*

Stanchions, rails & balustrades material

:

Steel/grade C250 & 350

Stanchions, rails and balustrades protective coating

:

HDG390 Hot-dip Galvanized (min 390g/m2 )

Structural steel fixings

:

M16 galvanized high tensile bolt set

Warranty

:

5 years

Diameter rails

:

48.3 mm OD | 41.9mm ID

Diameter stanchions

:

48.3 mm OD | 41.9 mm ID

Locking screws clamp fittings

:

M12 x 1.75 x 11 mm - DEXX ® Drive

Nominal thickness rails

:

3.2 mm

Nominal thickness stanchions

:

3.2 mm - 4.0 mm (loading dependent)

Panel weight

:

Up to 27.1 kg

Rail @ 6.0m weight

:

21.6 kg

Sheet thickness perforated panel

:

3 - 5 mm Aluminium 5005, Grade, Mill Finish

Stanchion with clamps weight

:

7.2 to 8.0 kg

Thickness clamp fittings

:

5.0 mm (approx)

Compliance

:

(NCC & BCA) Australian Standard AS/NZS 1170:2002, Australian Standard AS1428.1-2021 and relevant statutory WHS Codes of Practice/ Guidelines. Galvanized to AS 4792 and AS/ NZS 4680:2006 (where applicable)

Standard references

:

Extract of National Construction Code (NCC) Table 2.16a Barrier Construction

Testing

:

Australian Standard AS1170.1 Clause 3.6 Table 3.3. Stringent vibration endurance tests have been performed and independent testing has been carried out to confirm the suitability of the Moddex system in maritime conditions