GeoBrace

RMD Kwikform’s GeoBrace range is used with trench sheets or sheet piles to create small to large cofferdams, for the construction of manholes, chambers and tank installations.

Thanks to GeoBrace’s unique and innovative design, it not only has the slimmest section on the market at the joints (minimising the size of dig required), but there is no loss of allowable bending moment at the joint between extensions and hydraulic ram unit. This eliminates the logistical and potential safety issues associated with lower performance joints or those with limited reverse bending moment capacity.

FASTER
The pinned connections of GeoBrace allow much faster and easier build sequences compared with other pin and nut/bolt systems, eliminating the need for spanners or air ratchets.

SAFER
GeoBrace is CE-marked and manufactured to the latest EN1090 European standards.

EASIER
Our in-house engineering teams will create full drawing requirements with easy to follow build sequences for our GeoBrace systems.

Key Features
- Versatile
RMD Kwikform GeoBrace is available in 3 size ranges – 254, 390 and 550. All ranges use an easy-to-connect Pin System and are available in complementary, various fixed length component sections.
- Innovative Design
GeoBrace has the slimmest section on the market at the joints, but there is no loss of allowable bending moment at the joint between extensions or in the power pack.
- Market Leading
Available in 3 different duties of 254, 390 and 550, RMD Kwikform’s GeoBrace has allowable bending moments of up to 2310kNm.