Aeroseal LVOC (Low-VOC) contact adhesive is specially formulated for sealing Aerocel® EPDM-formulated pipe, sheet, and roll insulations for low-VOC applications. Can also be used to adhere Aerocel to various curved and flat surfaces, including metal and other substrates. Suitable for operating temperatures up to 257°F (125°C) for piping and 200°F (93°C) when adhering Aerocel insulation to approved substrates.
Ideal for projects where low-emitting materials are required to meet various indoor environmental-quality standards. Meets VOC limits for LEED® EQ Credit: Low-Emitting Materials, Adhesives & Sealants and Living Building Challenge (LBC) Red List Materials requirements.
Specification Compliances:
• California Department of Public Health (CDPH) Standard Method v1.2 for VOC emissions
• SCAQMD Rule 1168 for VOC content
• Living Building Challenge (LBC) Red List Materials
Key Benefits:
• Strong, tenacious bonds
• Fast tack – ready for adhesion in 3 to 5 minutes, depending on job site conditions
• Provides immediate vapor seal at seams
• Easy to apply with a brush or short-nap roller
• Protects piping & equipment by reducing the potential of corrosion under insulation (CUI)
• Aerocel Protape®, Aerocoat™ and Aerocoat LVOC™ tapes and coatings can be applied immediately after installation
Aeroseal LVOC (Low-VOC) contact adhesive is specially formulated for sealing Aerocel® EPDM-formulated pipe, sheet, and roll insulations for low-VOC applications. Can also be used to adhere Aerocel to various curved and flat surfaces, including metal and other substrates. Suitable for operating temperatures up to 257°F (125°C) for piping and 200°F (93°C) when adhering Aerocel insulation to approved substrates.
Ideal for projects where low-emitting materials are required to meet various indoor environmental-quality standards. Meets VOC limits for LEED® EQ Credit: Low-Emitting Materials, Adhesives & Sealants and Living Building Challenge (LBC) Red List Materials requirements.
Specification Compliances:
• California Department of Public Health (CDPH) Standard Method v1.2 for VOC emissions
• SCAQMD Rule 1168 for VOC content
• Living Building Challenge (LBC) Red List Materials
Key Benefits:
• Strong, tenacious bonds
• Fast tack – ready for adhesion in 3 to 5 minutes, depending on job site conditions
• Provides immediate vapor seal at seams
• Easy to apply with a brush or short-nap roller
• Protects piping & equipment by reducing the potential of corrosion under insulation (CUI)
• Aerocel Protape®, Aerocoat™ and Aerocoat LVOC™ tapes and coatings can be applied immediately after installation
Aeroseal LVOC (Low-VOC) contact adhesive is specially formulated for sealing Aerocel® EPDM-formulated pipe, sheet, and roll insulations for low-VOC applications. Can also be used to adhere Aerocel to various curved and flat surfaces, including metal and other substrates. Suitable for operating temperatures up to 257°F (125°C) for piping and 200°F (93°C) when adhering Aerocel insulation to approved substrates.
Ideal for projects where low-emitting materials are required to meet various indoor environmental-quality standards. Meets VOC limits for LEED® EQ Credit: Low-Emitting Materials, Adhesives & Sealants and Living Building Challenge (LBC) Red List Materials requirements.
Specification Compliances:
• California Department of Public Health (CDPH) Standard Method v1.2 for VOC emissions
• SCAQMD Rule 1168 for VOC content
• Living Building Challenge (LBC) Red List Materials
Key Benefits:
• Strong, tenacious bonds
• Fast tack – ready for adhesion in 3 to 5 minutes, depending on job site conditions
• Provides immediate vapor seal at seams
• Easy to apply with a brush or short-nap roller
• Protects piping & equipment by reducing the potential of corrosion under insulation (CUI)
• Aerocel Protape®, Aerocoat™ and Aerocoat LVOC™ tapes and coatings can be applied immediately after installation
United States
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
