The BRUCHAPaneel Acoustic - WP-A provides a practical and clean solution for sound absorption and insulation against airborne sound, for interior walls and false ceilings.
Design and surfaces Standard
Coil-coated, galvanised flashings
Exterior:
- Exposed side 25 μm polyester coating with a PVC protective film (protects against solar radiation). The film must be removed no later than 10 weeks after the production date (visible on the longitudinal panel seam).
- Profile 1 - 6
- Metal gauge: 0.6 mm (smaller metal gauge on request)
Interior:
- Exposed side 25 μm polyester coating with a PVC protective film (protects against solar radiation). The film must be removed no later than 10 weeks after the production date (visible on the longitudinal panel seam).
- Profile 2
- Hole proportion: 32.5 %
- Bore diameter: 3 mm round bore, offset
- Holes: DIN RV 3-5 (R3T5) (730-000)
- Metal gauge: 0.6 mm (smaller metal gauge on request)
Insulation core:
- Structural, web-oriented mineral fibre wool
- Shear resistant bond with sheet steel covers
- Density approx. 120 kg/m³, 140 kg/m³ available on request
Panel connection:
- Tongue groove interconnect; panels interlink precisely with no thermal bridge.
Vapour diffusion:
- Due to the vapour permeable inside cover, the use as an exterior wall for wet rooms and heated buildings is only conditionally possible, or not recommended.
Independent monitoring:
- National and international tests, quality standards
The BRUCHAPaneel Acoustic - WP-A provides a practical and clean solution for sound absorption and insulation against airborne sound, for interior walls and false ceilings.
Design and surfaces Standard
Coil-coated, galvanised flashings
Exterior:
- Exposed side 25 μm polyester coating with a PVC protective film (protects against solar radiation). The film must be removed no later than 10 weeks after the production date (visible on the longitudinal panel seam).
- Profile 1 - 6
- Metal gauge: 0.6 mm (smaller metal gauge on request)
Interior:
- Exposed side 25 μm polyester coating with a PVC protective film (protects against solar radiation). The film must be removed no later than 10 weeks after the production date (visible on the longitudinal panel seam).
- Profile 2
- Hole proportion: 32.5 %
- Bore diameter: 3 mm round bore, offset
- Holes: DIN RV 3-5 (R3T5) (730-000)
- Metal gauge: 0.6 mm (smaller metal gauge on request)
Insulation core:
- Structural, web-oriented mineral fibre wool
- Shear resistant bond with sheet steel covers
- Density approx. 120 kg/m³, 140 kg/m³ available on request
Panel connection:
- Tongue groove interconnect; panels interlink precisely with no thermal bridge.
Vapour diffusion:
- Due to the vapour permeable inside cover, the use as an exterior wall for wet rooms and heated buildings is only conditionally possible, or not recommended.
Independent monitoring:
- National and international tests, quality standards
The BRUCHAPaneel Acoustic - WP-A provides a practical and clean solution for sound absorption and insulation against airborne sound, for interior walls and false ceilings.
Design and surfaces Standard
Coil-coated, galvanised flashings
Exterior:
- Exposed side 25 μm polyester coating with a PVC protective film (protects against solar radiation). The film must be removed no later than 10 weeks after the production date (visible on the longitudinal panel seam).
- Profile 1 - 6
- Metal gauge: 0.6 mm (smaller metal gauge on request)
Interior:
- Exposed side 25 μm polyester coating with a PVC protective film (protects against solar radiation). The film must be removed no later than 10 weeks after the production date (visible on the longitudinal panel seam).
- Profile 2
- Hole proportion: 32.5 %
- Bore diameter: 3 mm round bore, offset
- Holes: DIN RV 3-5 (R3T5) (730-000)
- Metal gauge: 0.6 mm (smaller metal gauge on request)
Insulation core:
- Structural, web-oriented mineral fibre wool
- Shear resistant bond with sheet steel covers
- Density approx. 120 kg/m³, 140 kg/m³ available on request
Panel connection:
- Tongue groove interconnect; panels interlink precisely with no thermal bridge.
Vapour diffusion:
- Due to the vapour permeable inside cover, the use as an exterior wall for wet rooms and heated buildings is only conditionally possible, or not recommended.
Independent monitoring:
- National and international tests, quality standards
United States
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
