SOLID STATE AREA LIGHTING
Decorative pendant luminaire with angled hood. HR and VR reflector optics, flat or sag lens. Available in two sizes.
Hinged lens frame door for lamp and ballast access. Pantented "tru-level" pendant luminaire coupling system. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance.
Heavy gauge formed aluminum body and hood. cast aluminum pendant coupling. Stainless steel hardware. Polyester powdercoat finish.
Luminaire
Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSAPL25) or spun aluminum with reveal (.125" min. wall for DSAPL20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation. Upper Housing with lit windows. LED Optic provides soft glow from diffuse windows. Circuited separately from main optical module.
PLED Optics
Emitters (LED’s) are arrayed on a metal core PCB panel with each emitter located on a copper thermal transfer pad and enclosed by an LED refractor. LED optics completely seal each individual emitter to meet an IP66 rating. In asymmetric distributions, a micro-reflector inside the refractor re-directs the house side emitter output towards the street side and functions as a house side shielding element. Refractors are injection molded H12 acrylic. Each LED refractor is sealed to the PCB over an emitter and all refractors are retained by an aluminum frame. Any one Panel, or group of Panels in a luminaire, have the same optical pattern. LED refractors produce standard site/area distributions. Panels are field replaceable and field rotatable in 90° increments.
LED Emitters
High output LED's are utilized with drive currents ranging from 350mA to 875mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options.
LED Driver
Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.)
Amber LED’s
PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors.
Finish
Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.
SOLID STATE AREA LIGHTING
Decorative pendant luminaire with angled hood. HR and VR reflector optics, flat or sag lens. Available in two sizes.
Hinged lens frame door for lamp and ballast access. Pantented "tru-level" pendant luminaire coupling system. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance.
Heavy gauge formed aluminum body and hood. cast aluminum pendant coupling. Stainless steel hardware. Polyester powdercoat finish.
Luminaire
Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSAPL25) or spun aluminum with reveal (.125" min. wall for DSAPL20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation. Upper Housing with lit windows. LED Optic provides soft glow from diffuse windows. Circuited separately from main optical module.
PLED Optics
Emitters (LED’s) are arrayed on a metal core PCB panel with each emitter located on a copper thermal transfer pad and enclosed by an LED refractor. LED optics completely seal each individual emitter to meet an IP66 rating. In asymmetric distributions, a micro-reflector inside the refractor re-directs the house side emitter output towards the street side and functions as a house side shielding element. Refractors are injection molded H12 acrylic. Each LED refractor is sealed to the PCB over an emitter and all refractors are retained by an aluminum frame. Any one Panel, or group of Panels in a luminaire, have the same optical pattern. LED refractors produce standard site/area distributions. Panels are field replaceable and field rotatable in 90° increments.
LED Emitters
High output LED's are utilized with drive currents ranging from 350mA to 875mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options.
LED Driver
Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.)
Amber LED’s
PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors.
Finish
Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.
SOLID STATE AREA LIGHTING
Decorative pendant luminaire with angled hood. HR and VR reflector optics, flat or sag lens. Available in two sizes.
Hinged lens frame door for lamp and ballast access. Pantented "tru-level" pendant luminaire coupling system. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance.
Heavy gauge formed aluminum body and hood. cast aluminum pendant coupling. Stainless steel hardware. Polyester powdercoat finish.
Luminaire
Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSAPL25) or spun aluminum with reveal (.125" min. wall for DSAPL20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation. Upper Housing with lit windows. LED Optic provides soft glow from diffuse windows. Circuited separately from main optical module.
PLED Optics
Emitters (LED’s) are arrayed on a metal core PCB panel with each emitter located on a copper thermal transfer pad and enclosed by an LED refractor. LED optics completely seal each individual emitter to meet an IP66 rating. In asymmetric distributions, a micro-reflector inside the refractor re-directs the house side emitter output towards the street side and functions as a house side shielding element. Refractors are injection molded H12 acrylic. Each LED refractor is sealed to the PCB over an emitter and all refractors are retained by an aluminum frame. Any one Panel, or group of Panels in a luminaire, have the same optical pattern. LED refractors produce standard site/area distributions. Panels are field replaceable and field rotatable in 90° increments.
LED Emitters
High output LED's are utilized with drive currents ranging from 350mA to 875mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options.
LED Driver
Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.)
Amber LED’s
PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors.
Finish
Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.
United States
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
