SOLID STATE AREA LIGHTING
Decorative pendant luminaire with angled hood. Available in two sizes.
DSARB Series luminaire in 2 sizes. Prismatic drop down refractor lens and decorative top bands. Horizontal louvers (decorative bands – non-illuminated) are made of heavy gauge aluminum sheet and welded to the ballast housing. Pantented "tru-level" pendant luminaire coupling system. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance.
Heavy gauge formed aluminum body and hood. Cast aluminum pendant coupling. Stainless steel hardware. Polyester powdercoat finish.
Luminaire
Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSARB25) or spun aluminum with reveal (.125" min. wall for DSARB20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Horizontal louvers (decorative bands – non-illuminated) are made of heavy gauge aluminum sheet and welded to the ballast housing. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation.
LED Power ArrayTM
Three-dimensional array of individual LED Tubes fastened to a retaining plate. Each LED Tube consists of circuit board populated with a multiple of LED’s and is mechanically fastened to a radial aluminum heat sink. An acrylic lens and end cap protects the LED Tube’s internal components.
Vertical Power ArrayTM with Refracting Lens: LED Tubes are aligned vertically and arranged radially to produce an even raw light distribution that simulates standard light sources. Used in conjunction with the external prismatic refracting which provides the optical control.
LED Emitters
High output LED's are utilized with drive currents ranging from 350mA to 525mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options.
LED Driver
Constant current electronic with a power factor of >.90 and aminimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.)
Amber LED’s
PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors.
Finish
Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.
SOLID STATE AREA LIGHTING
Decorative pendant luminaire with angled hood. Available in two sizes.
DSARB Series luminaire in 2 sizes. Prismatic drop down refractor lens and decorative top bands. Horizontal louvers (decorative bands – non-illuminated) are made of heavy gauge aluminum sheet and welded to the ballast housing. Pantented "tru-level" pendant luminaire coupling system. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance.
Heavy gauge formed aluminum body and hood. Cast aluminum pendant coupling. Stainless steel hardware. Polyester powdercoat finish.
Luminaire
Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSARB25) or spun aluminum with reveal (.125" min. wall for DSARB20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Horizontal louvers (decorative bands – non-illuminated) are made of heavy gauge aluminum sheet and welded to the ballast housing. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation.
LED Power ArrayTM
Three-dimensional array of individual LED Tubes fastened to a retaining plate. Each LED Tube consists of circuit board populated with a multiple of LED’s and is mechanically fastened to a radial aluminum heat sink. An acrylic lens and end cap protects the LED Tube’s internal components.
Vertical Power ArrayTM with Refracting Lens: LED Tubes are aligned vertically and arranged radially to produce an even raw light distribution that simulates standard light sources. Used in conjunction with the external prismatic refracting which provides the optical control.
LED Emitters
High output LED's are utilized with drive currents ranging from 350mA to 525mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options.
LED Driver
Constant current electronic with a power factor of >.90 and aminimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.)
Amber LED’s
PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors.
Finish
Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.
SOLID STATE AREA LIGHTING
Decorative pendant luminaire with angled hood. Available in two sizes.
DSARB Series luminaire in 2 sizes. Prismatic drop down refractor lens and decorative top bands. Horizontal louvers (decorative bands – non-illuminated) are made of heavy gauge aluminum sheet and welded to the ballast housing. Pantented "tru-level" pendant luminaire coupling system. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance.
Heavy gauge formed aluminum body and hood. Cast aluminum pendant coupling. Stainless steel hardware. Polyester powdercoat finish.
Luminaire
Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSARB25) or spun aluminum with reveal (.125" min. wall for DSARB20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Horizontal louvers (decorative bands – non-illuminated) are made of heavy gauge aluminum sheet and welded to the ballast housing. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation.
LED Power ArrayTM
Three-dimensional array of individual LED Tubes fastened to a retaining plate. Each LED Tube consists of circuit board populated with a multiple of LED’s and is mechanically fastened to a radial aluminum heat sink. An acrylic lens and end cap protects the LED Tube’s internal components.
Vertical Power ArrayTM with Refracting Lens: LED Tubes are aligned vertically and arranged radially to produce an even raw light distribution that simulates standard light sources. Used in conjunction with the external prismatic refracting which provides the optical control.
LED Emitters
High output LED's are utilized with drive currents ranging from 350mA to 525mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options.
LED Driver
Constant current electronic with a power factor of >.90 and aminimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.)
Amber LED’s
PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors.
Finish
Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.
United States
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
