SOLID STATE AREA LIGHTING
Decorative pendant luminaire with concave hood. Lamp diffuser optics also available in LED.
DSC Series luminaire in 2 sizes. "Jelly jar" lamp diffuser. Pantented "tru-level" pendant luminaire coupling system. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance.
Heavy gauge formed aluminum body and hood. Cast aluminum pendant coupling. Stainless steel hardware. Polyester powdercoat finish.
Luminaire
Upper housing is 0.125” thick formed alumunim. Lower housing is 0.080” thick formed aluminum. Threaded reciever accepts glass diffuser. Glass diffuser is heavy wall tempered prismatic glass available in clear prismatic or prismatic opal. Pendant Mount uses Trulevel ball coupling mount. Wall mount has integrated side mount extruded aluminum arm and cast aluminum wall plate. All hardware is stainless steel.
LED Power ArrayTM
Three-dimensional array of individual LED Tubes fastened to a retaining plate. Each LED Tube consists of circuit board populated with a multiple of LED’s and is mechanically fastened to a radial aluminum heat sink. An acrylic Lens and end cap protects the LED Tube’s internal components. Vertical Power ArrayTM: LED Tubes are aligned vertically and arranged radially to produce an even raw light distribution that simulates standard light sources. Produces a minimal glare, symmetric diffuse light distribution.
LED Emitters
High Output LED’s are driven at 350mA for nominal 1 Watt output each. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult
Factory for other LED options.
LED Driver
UL and CUL recognized High Power Factor, Constant Current LED drivers operate on input voltages from 120-277VAC, 50/60hz. Consult Factory for 347-480VAC. Driver is mechanically fastened to a retaining bracket. Main power quick disconnect provided. Driver has a minimum 4KV of internal surge protection, 10KV & 20KV Surge Protector optional. Dimming and High-Low Driver options available.
Finish
Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.
SOLID STATE AREA LIGHTING
Decorative pendant luminaire with concave hood. Lamp diffuser optics also available in LED.
DSC Series luminaire in 2 sizes. "Jelly jar" lamp diffuser. Pantented "tru-level" pendant luminaire coupling system. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance.
Heavy gauge formed aluminum body and hood. Cast aluminum pendant coupling. Stainless steel hardware. Polyester powdercoat finish.
Luminaire
Upper housing is 0.125” thick formed alumunim. Lower housing is 0.080” thick formed aluminum. Threaded reciever accepts glass diffuser. Glass diffuser is heavy wall tempered prismatic glass available in clear prismatic or prismatic opal. Pendant Mount uses Trulevel ball coupling mount. Wall mount has integrated side mount extruded aluminum arm and cast aluminum wall plate. All hardware is stainless steel.
LED Power ArrayTM
Three-dimensional array of individual LED Tubes fastened to a retaining plate. Each LED Tube consists of circuit board populated with a multiple of LED’s and is mechanically fastened to a radial aluminum heat sink. An acrylic Lens and end cap protects the LED Tube’s internal components. Vertical Power ArrayTM: LED Tubes are aligned vertically and arranged radially to produce an even raw light distribution that simulates standard light sources. Produces a minimal glare, symmetric diffuse light distribution.
LED Emitters
High Output LED’s are driven at 350mA for nominal 1 Watt output each. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult
Factory for other LED options.
LED Driver
UL and CUL recognized High Power Factor, Constant Current LED drivers operate on input voltages from 120-277VAC, 50/60hz. Consult Factory for 347-480VAC. Driver is mechanically fastened to a retaining bracket. Main power quick disconnect provided. Driver has a minimum 4KV of internal surge protection, 10KV & 20KV Surge Protector optional. Dimming and High-Low Driver options available.
Finish
Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.
SOLID STATE AREA LIGHTING
Decorative pendant luminaire with concave hood. Lamp diffuser optics also available in LED.
DSC Series luminaire in 2 sizes. "Jelly jar" lamp diffuser. Pantented "tru-level" pendant luminaire coupling system. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance.
Heavy gauge formed aluminum body and hood. Cast aluminum pendant coupling. Stainless steel hardware. Polyester powdercoat finish.
Luminaire
Upper housing is 0.125” thick formed alumunim. Lower housing is 0.080” thick formed aluminum. Threaded reciever accepts glass diffuser. Glass diffuser is heavy wall tempered prismatic glass available in clear prismatic or prismatic opal. Pendant Mount uses Trulevel ball coupling mount. Wall mount has integrated side mount extruded aluminum arm and cast aluminum wall plate. All hardware is stainless steel.
LED Power ArrayTM
Three-dimensional array of individual LED Tubes fastened to a retaining plate. Each LED Tube consists of circuit board populated with a multiple of LED’s and is mechanically fastened to a radial aluminum heat sink. An acrylic Lens and end cap protects the LED Tube’s internal components. Vertical Power ArrayTM: LED Tubes are aligned vertically and arranged radially to produce an even raw light distribution that simulates standard light sources. Produces a minimal glare, symmetric diffuse light distribution.
LED Emitters
High Output LED’s are driven at 350mA for nominal 1 Watt output each. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult
Factory for other LED options.
LED Driver
UL and CUL recognized High Power Factor, Constant Current LED drivers operate on input voltages from 120-277VAC, 50/60hz. Consult Factory for 347-480VAC. Driver is mechanically fastened to a retaining bracket. Main power quick disconnect provided. Driver has a minimum 4KV of internal surge protection, 10KV & 20KV Surge Protector optional. Dimming and High-Low Driver options available.
Finish
Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.
United States
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
