Interplus 1180: Epoxy Finish Low VOC / Steel: AS/NZS 2312.1:2014 - System Designation EHB6

1st Coat

:

Interzinc 52E | Interzinc 52

2nd Coat

:

Interplus 1180

3rd Coat

:

Interplus 1180

Colour

:

Available in a wide range of colours via International Chromascan Tinting System (including AS 2700, RAL, BS and custom colours).

Pre-Treatment - Cleaning

:

All surfaces should be assessed and treated as per ISO 8504:2000 | Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning | Surface salts concentration (e.g. chloride deposits) shall be less than 10 µg/cm2 prior to painting

Pre-Treatment - Fabrication

:

All surfaces shall be finished as per ISO 8501-3 Table 1 | Grade P2 with all edges rounded to minimum 2mm radius

Substrate

:

Steel

Surface Preparation

:

Abrasive blast clean to Sa2.5 (ISO 8501-1:2007) or SSPC-SP | A sharp, angular surface profile of 50-75 microns (2-3 mils) is recommended

Type

:

Protective

Warranty

:

Refer to International Protective Coatings for further details relating to performance warranty

Nominated Dry Film Thickness Per Coat (Microns)

:

1st Coat: 75 µm | 2nd Coat: 125 µm | 3rd Coat: 125 µm

Total System Dry Film Thickness (Microns)

:

325 µm

AS/NZS 2312.1: 2014 System Designation

:

EHB6

Durability (As Per AS/NZS 2312.1:2014)

:

Up to C2 (Low): 25+ years | C3 (Medium): 25+ years | C4 (High): 25+ years | C5-M (Very High): 15-25 years

NATSPEC National Classification System

:

0345 Steel - Protective Paint Coatings | 0671 Painting

SpecPack

:

09910 Painting

SpeedSpec

:

09910 Painting