- New Zealand
Schomburg Unifix S3
Highly flexible thin-bed adhesive UNIFIX-S3 is used as a thin-bed mortar, particularly for laying vitrified tiles with low water absorption ≤ 0.5% (porcelain stoneware), stoneware, clinker, and mosaic on new cement-based substrates. Thanks to the high deformability of UNIFIX-S3, damaging shear stresses in the covering can be largely compensated for. UNIFIX-S3 may be adjusted with the addition of water for non-slump or flowing bed consistency. UNIFIX-S3 is particularly well suited to use on balconies and terraces, in swimming pools and containers, on heated constructions, on new, load-bearing, cement based substrates, and for laying tiles and boards with low water absorption.Thanks to its high elasticity, UNIFIX-S3 reliably absorbs high stresses, for example those that occur between substrates and surface in exterior areas or when laying on new, walkable cement-based screeds (approx. 3 days after being put down) and heated screeds. The vapour permeability of UNIFIX-S3 guarantee that cement-based substrates that are still moist will dry out properly, even when laying is carried out early. The obligatory heating of the screed before laying ceramic materials can be omitted. Properties: Highly-flexible special tile adhesive For critical substrates and high stresses Can also be used on new substrates Waterproof and frost-resistant Vapour permeable For interior and exterior areas In accordance with DIN EN 12004, C2 TE S2 (Formerly known as Unifix 2K/6)
Highly flexible thin-bed adhesive UNIFIX-S3 is used as a thin-bed mortar, particularly for laying vitrified tiles with low water absorption ≤ 0.5% (porcelain stoneware), stoneware, clinker, and mosaic on new cement-based substrates. Thanks to the high deformability of UNIFIX-S3, damaging shear stresses in the covering can be largely compensated for. UNIFIX-S3 may be adjusted with the addition of water for non-slump or flowing bed consistency. UNIFIX-S3 is particularly well suited to use on balconies and terraces, in swimming pools and containers, on heated constructions, on new, load-bearing, cement based substrates, and for laying tiles and boards with low water absorption.Thanks to its high elasticity, UNIFIX-S3 reliably absorbs high stresses, for example those that occur between substrates and surface in exterior areas or when laying on new, walkable cement-based screeds (approx. 3 days after being put down) and heated screeds. The vapour permeability of UNIFIX-S3 guarantee that cement-based substrates that are still moist will dry out properly, even when laying is carried out early. The obligatory heating of the screed before laying ceramic materials can be omitted. Properties: Highly-flexible special tile adhesive For critical substrates and high stresses Can also be used on new substrates Waterproof and frost-resistant Vapour permeable For interior and exterior areas In accordance with DIN EN 12004, C2 TE S2 (Formerly known as Unifix 2K/6)
Highly flexible thin-bed adhesive
UNIFIX-S3 is used as a thin-bed mortar, particularly for laying vitrified tiles with low water absorption ≤ 0.5% (porcelain stoneware), stoneware, clinker, and mosaic on new cement-based substrates. Thanks to the high deformability of UNIFIX-S3, damaging shear stresses in the covering can be largely compensated for.
UNIFIX-S3 may be adjusted with the addition of water for non-slump or flowing bed consistency. UNIFIX-S3 is particularly well suited to use on balconies and terraces, in swimming pools and containers, on heated constructions, on new, load-bearing, cement based substrates, and for laying tiles and boards with low water absorption.Thanks to its high elasticity, UNIFIX-S3 reliably absorbs high stresses, for example those that occur between substrates and surface in exterior areas or when laying on new, walkable cement-based screeds (approx. 3 days after being put down) and heated screeds. The vapour permeability of UNIFIX-S3 guarantee that cement-based substrates that are still moist will dry out properly, even when laying is carried out early. The obligatory heating of the screed before laying ceramic materials can be omitted.
Properties:
Highly-flexible special tile adhesive
For critical substrates and high stresses
Can also be used on new substrates
Waterproof and frost-resistant
Vapour permeable
For interior and exterior areas
In accordance with DIN EN 12004, C2 TE S2
(Formerly known as Unifix 2K/6)
UNIFIX-S3 is used as a thin-bed mortar, particularly for laying vitrified tiles with low water absorption ≤ 0.5% (porcelain stoneware), stoneware, clinker, and mosaic on new cement-based substrates. Thanks to the high deformability of UNIFIX-S3, damaging shear stresses in the covering can be largely compensated for.
UNIFIX-S3 may be adjusted with the addition of water for non-slump or flowing bed consistency. UNIFIX-S3 is particularly well suited to use on balconies and terraces, in swimming pools and containers, on heated constructions, on new, load-bearing, cement based substrates, and for laying tiles and boards with low water absorption.Thanks to its high elasticity, UNIFIX-S3 reliably absorbs high stresses, for example those that occur between substrates and surface in exterior areas or when laying on new, walkable cement-based screeds (approx. 3 days after being put down) and heated screeds. The vapour permeability of UNIFIX-S3 guarantee that cement-based substrates that are still moist will dry out properly, even when laying is carried out early. The obligatory heating of the screed before laying ceramic materials can be omitted.
Properties:
Highly-flexible special tile adhesive
For critical substrates and high stresses
Can also be used on new substrates
Waterproof and frost-resistant
Vapour permeable
For interior and exterior areas
In accordance with DIN EN 12004, C2 TE S2
(Formerly known as Unifix 2K/6)
General Specification
Colour | : | White | Grey |
Application | : | Installed by an Equus Certified Applicator |
Characteristics | : | 2 component system |
Warranty | : | Material warranties available |
Storage | : | Dry | Frost free |
Size
Weight | : | 25 kg |
Other Weight Options | : | 25kg Bag | 8kg pail |
Thickness | : | 5 mm |
Technical
Mixing ratio | : | 3 parts by weight | 1 part by weight |
Application/substrate temp | : | +5 °C to +25 °C |
Pot life | : | Approx. 60 minutes |
Adhesive open time | : | Approx. 30 minutes |
Collection
Other Products You Might Like