- New Zealand
Interlac 649: Single Pack Protection / Steel: AS/NZS 2312.1:2014 - System Designation ALK3
$ Cost Effective
Australia
Type | : | Protective |
Pre-Treatment - Fabrication | : | All surfaces shall be finished as per ISO 8501-3 Table 1 | Grade P2 with all edges rounded to minimum 2mm radius |
Pre-Treatment - Cleaning | : | All surfaces should be assessed and treated as per ISO 8504:2000 | Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning |
Surface Preparation | : | Power tool clean all surfaces to St3 (ISO 8501- 1:2007) or SSPC- SP3 | All loose and cracked paints should be chamfered back to a firm, sound edge | All areas to be coated should be clean, dry and free of contamination |
1st Coat | : | Interprime 4198 |
2nd Coat | : | Interlac 649 |
Substrate | : | Steel |
Warranty | : | Refer to International Protective Coatings for further details relating to performance warranty |
Colour Availability | : | Available in a wide range of colours via International Chromascan Tinting System (including AS 2700, RAL, BS and custom colours) | Interhane 870 is also availble in a wide range of metallic colours |
Nominated Dry Film Thickness Per Coat (Microns) | : | 1st Coat: 75 µm / 2nd Coat: 40 µm |
Total System Dry Film Thickness (Microns) | : | 115 µm |
AS/NZS 2312.1: 2014 System Designation | : | ALK3 |
Durability (As Per AS/NZS 2312.1:2014) | : | Up to C2 (Low): 5-15 years / C3 (Medium): 2-5 years / C4 (High): Not Recommended / C5-M (Very High): Not Recommended |
NATSPEC National Classification System | : | 0345 Steel - Protective Paint Coatings / 0671 Painting |
SpecPack | : | 09910 Painting |
SpeedSpec | : | 09910 Painting |