- New Zealand
Aquron 300
AQURON 300 is a colloidal silica hydrogel admixture for concrete AQURON 300 is an environmentally friendly, liquid concrete additive which provides integral waterproofing and corrosion protection for your peace of mind while also enhancing workability for a better placement experience. AQURON 300 does not negatively effect critical concrete properties. WATERPROOFING The solidified hydrogel throughout the concrete prevents ingress and migration of moisture and corrosives through the concrete. It is an industry-accepted fact that moisture causes problems in concrete as it provides a transport system for corrosives to reach the reinforcing steel and cause rusting. This leads to unsightly staining, cracking, pop-outs and in the long term, a hazardous structure needing costly repairs. By immobilising moisture and closing concrete bleed porosities, AQURON 300 provides long-term waterproofing, protection and durability. BENEFITS DURING CONSTRUCTION During the batching, placement and curing stages, AQURON 300 creates more efficient saturation of every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete. During the batching, placement and curing stages, AQURON 300 creates more efficient saturation of every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete. AQURON 300 enhances rheology, making it useful for awkward placements and pumping into small cavities where higher slump is required with minimised strength losses, as the water to cement ratio does not need to be increased as much to achieve workability LONG-TERM BENEFITS AQURON 300 will self-heal non-moving cracks up to 0.5mm. AQURON 300 is fully compatible with any paint, coating or adhesive designed for bare concrete; it does not introduce any element not already found within the concrete. The hydrogel is maintained for the design life of the concrete, you cannot remove or reverse the chemical reaction that forms the hydrogel. In extremely aggressive environments, subject to 0-2.7 pH acids the surface will still be subject to attack, although it is slowed. The acid cannot attack the matrix of the concrete to the same extent as untreated concrete. This assists extension of the service life of the concrete.
AQURON 300 is a colloidal silica hydrogel admixture for concrete AQURON 300 is an environmentally friendly, liquid concrete additive which provides integral waterproofing and corrosion protection for your peace of mind while also enhancing workability for a better placement experience. AQURON 300 does not negatively effect critical concrete properties. WATERPROOFING The solidified hydrogel throughout the concrete prevents ingress and migration of moisture and corrosives through the concrete. It is an industry-accepted fact that moisture causes problems in concrete as it provides a transport system for corrosives to reach the reinforcing steel and cause rusting. This leads to unsightly staining, cracking, pop-outs and in the long term, a hazardous structure needing costly repairs. By immobilising moisture and closing concrete bleed porosities, AQURON 300 provides long-term waterproofing, protection and durability. BENEFITS DURING CONSTRUCTION During the batching, placement and curing stages, AQURON 300 creates more efficient saturation of every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete. During the batching, placement and curing stages, AQURON 300 creates more efficient saturation of every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete. AQURON 300 enhances rheology, making it useful for awkward placements and pumping into small cavities where higher slump is required with minimised strength losses, as the water to cement ratio does not need to be increased as much to achieve workability LONG-TERM BENEFITS AQURON 300 will self-heal non-moving cracks up to 0.5mm. AQURON 300 is fully compatible with any paint, coating or adhesive designed for bare concrete; it does not introduce any element not already found within the concrete. The hydrogel is maintained for the design life of the concrete, you cannot remove or reverse the chemical reaction that forms the hydrogel. In extremely aggressive environments, subject to 0-2.7 pH acids the surface will still be subject to attack, although it is slowed. The acid cannot attack the matrix of the concrete to the same extent as untreated concrete. This assists extension of the service life of the concrete.
AQURON 300 is a colloidal silica hydrogel admixture for concrete
AQURON 300 is an environmentally friendly, liquid concrete additive which provides integral waterproofing and corrosion protection for your peace of mind while also enhancing workability for a better placement experience.
AQURON 300 does not negatively effect critical concrete properties.
WATERPROOFING
The solidified hydrogel throughout the concrete prevents ingress and migration of moisture and corrosives through the concrete.
It is an industry-accepted fact that moisture causes problems in concrete as it provides a transport system for corrosives to reach the reinforcing steel and cause rusting. This leads to unsightly staining, cracking, pop-outs and in the long term, a hazardous structure needing costly repairs. By immobilising moisture and closing concrete bleed porosities, AQURON 300 provides long-term waterproofing, protection and durability.
BENEFITS DURING CONSTRUCTION
During the batching, placement and curing stages, AQURON 300 creates
more efficient saturation of every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete.
During the batching, placement and curing stages, AQURON 300 creates
more efficient saturation of every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete.
AQURON 300 enhances rheology, making it useful for awkward placements and pumping into small cavities where higher slump is required with minimised strength losses, as the water to cement ratio does not need to be increased as much to achieve workability
LONG-TERM BENEFITS
AQURON 300 will self-heal non-moving cracks up to 0.5mm.
AQURON 300 is fully compatible with any paint, coating or adhesive designed for bare concrete; it does not introduce any element not already found within the concrete.
The hydrogel is maintained for the design life of the concrete, you cannot
remove or reverse the chemical reaction that forms the hydrogel.
In extremely aggressive environments, subject to 0-2.7 pH acids the surface
will still be subject to attack, although it is slowed. The acid cannot attack the
matrix of the concrete to the same extent as untreated concrete. This assists extension of the service life of the concrete.
AQURON 300 is an environmentally friendly, liquid concrete additive which provides integral waterproofing and corrosion protection for your peace of mind while also enhancing workability for a better placement experience.
AQURON 300 does not negatively effect critical concrete properties.
WATERPROOFING
The solidified hydrogel throughout the concrete prevents ingress and migration of moisture and corrosives through the concrete.
It is an industry-accepted fact that moisture causes problems in concrete as it provides a transport system for corrosives to reach the reinforcing steel and cause rusting. This leads to unsightly staining, cracking, pop-outs and in the long term, a hazardous structure needing costly repairs. By immobilising moisture and closing concrete bleed porosities, AQURON 300 provides long-term waterproofing, protection and durability.
BENEFITS DURING CONSTRUCTION
During the batching, placement and curing stages, AQURON 300 creates
more efficient saturation of every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete.
During the batching, placement and curing stages, AQURON 300 creates
more efficient saturation of every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete.
AQURON 300 enhances rheology, making it useful for awkward placements and pumping into small cavities where higher slump is required with minimised strength losses, as the water to cement ratio does not need to be increased as much to achieve workability
LONG-TERM BENEFITS
AQURON 300 will self-heal non-moving cracks up to 0.5mm.
AQURON 300 is fully compatible with any paint, coating or adhesive designed for bare concrete; it does not introduce any element not already found within the concrete.
The hydrogel is maintained for the design life of the concrete, you cannot
remove or reverse the chemical reaction that forms the hydrogel.
In extremely aggressive environments, subject to 0-2.7 pH acids the surface
will still be subject to attack, although it is slowed. The acid cannot attack the
matrix of the concrete to the same extent as untreated concrete. This assists extension of the service life of the concrete.
General Specification
Type | : | Liquid coat |
Appearance | : | Clear |
Size
Packaging | : | 20 litre pails / 1000 litre totes |
Technical
Flammable | : | Nil |
Air Content | : | 0-20% increase |
Compressive Strength | : | 5-20% increase at 28 days |
Bleed | : | 0-11% decrease |
Spill clean-up | : | Dilute/flush using water |
Hazardous vapours | : | None |
Freeze harm | : | Do not allow to freeze |
Crystalline silica content | : | Nil |
Freeze temperature | : | 0°C |
Environmentally | : | Neutral |
Boiling point | : | 110°C |
Flammability | : | None |
Toxicity | : | Nil |
pH | : | 11.3 |
Specific gravity | : | 1.11 to 1.13 |
Flash point | : | None |
VOC | : | Nil |
Odour | : | None |
Storage & Shelf Life | : | Indefinite,Indefinite in sealed containers |
Drying Shrinkage | : | 20-35% decrease |
VPV | : | no increase/decrease on control |
Permeability | : | 90% reduction on control |
Other Products You Might Like
Other Products You Might Like