-
New Zealand
Australia
Hong Kong SAR
Indonesia
Malaysia
Philippines
Singapore
General Specification
| Application | : | Cycle paths and bikeways | Shared pedestrian paths | Protection over culverts | Footbridges | Refer to applicable Aust Standards and Building Codes |
| Balluster material | : | Steel |
| Colour | : | Powdercoated Options Available on request |
| Protective Coating Clamp Fittings | : | Hot-dip Galvanized with unique dual protective coating on locking screw threads |
| Protective Coating Optional | : | Powder coating and paint specs |
| Protective Coating Stanchions & Rail | : | HDG390 Hot-dip Galvanized (Minimum 390 g/ m²) |
| Top rail material | : | Stainless steel |
| Top Rail Material detail | : | Stainless steel | Ductile iron | Steel/grade 250 & C350 |
| Top rail shape | : | Round |
| Warranty | : | 5 years |
Size
| Baluster Centres | : | 100 mm (84 mm gap) |
| Diameter | : | 48.3 mm OD | 39 mm |
| Dimension | : | 1255 mm high |
| Heavy Duty Baluster | : | 16 mm Grade 350 mPa |
| Length | : | 300 mm |
| Locking Screws | : | M12 x 1.75 x 11 mm - DEXX ® Drive |
| Thickness | : | 16.0 mm plate | 3.25 mm (Medium wall applications) | 4.0 mm (Heavy wall applications) | 5.0 mm (Approx) |
Technical
| Fixings Concrete | : | M16 mechanical concrete anchors or cast in studs/ ferrules as specified |
| Fixings Structural Steel | : | M16 galvanized high tensile bolt set |
Certification
| Compliance | : | Compliantto AS5100.2 Clause 12.5 and the NZTA Bridge Manual Compliant to Clause B6.4.* |
