BITUTHENE® 3000 is a self-adhesive, rubberised asphalt/polyethylene waterproofng membrane for basements, and other subterranean applications.
GCP Applied Technologies’ (“GCP”) BITUTHENE 3000 Membrane combine a robust, flexible, high performance, cross laminated, HDPE carrier film with a tacky, self-adhesive rubberized asphalt compound specifically designed to adhere to cured concrete surfaces.
Product Advantages
• GCP (Singapore) Pte Ltd is certified to ISO 9001 and ISO 14001
• Specifically designed as a barrier to water, moisture and gas by physically isolating the structure from the surrounding substrate
• Resistant to hydrostatic head pressure
• Cross laminated film is dimensionally stable with, high tear strength, puncture and impact resistance
• Cold applied - No flame hazard; self-adhesive overlaps designed to provide membrane continuity
• Chemically resistant to most soil conditions, membrane is designed to provide effective external protection against aggressive soils and groundwater
• Flexible – Elongation in excess of 300% helps accommodate minor settlement and shrinkage movement
• Tanking security — combined flexible membrane and GCP waterstop system available for security
• Controlled thickness – Factory-made sheet allows for constant, non-variable site application
• Wide application window - BITUTHENE 3000 Membrane for use when surface and ambient temperatures are between 5°C and 35°C
Ancillary Components
• BITUTHENE Solvent Primer - bitumen-based primer used to prime dry structural concrete and masonry surfaces, with moisture content below 5.0%
• BITUTHENE Solvent Primer Vertical - bitumen-based high-tack primer for vertical applications in code weather, to dry (< 5.0% moisture content) structural concrete and masonry surfaces
• BITUTHENE Primer Type C - water borne bitumen-based primer, used to prime damp or green concrete, with moisture content below 10.0%
• BITUTHENE Liquid Membrane - two component, elastomeric, liquid applied detailing compound.
• PROTECTOBOARD™ /HYDRODUCT® - membrane protection/drainage system
• BITUSTIK™ Tape Super - double sided adhesive tape
• Water-Bar /Swellseal® waterstops – for construction and expansion joints
The most current Data Sheets for most system components are available at gcpat.com. For more information on any system or ancillary component contact your local GCP technical service advisor.
Limitations of Use
• Information contained in this document does not cover all possible application scenarios or imply product suitability for an application. Please contact your local GCP representative or the GCP Technical Department for further information.
• BITUTHENE Membranes are designed where in-service temperatures will not exceed 54°C.
• Do not use BITUTHENE Mastic to terminate BITUTHENE Membranes to PREPRUFE® pre-applied waterproofing membrane systems. Terminations to PREPRUFE membranes should only be done with BITUTHENE Liquid Membrane.
• Do not apply BITUTHENE Membranes over insulation or lightweight insulating concrete.
Safety and Handling Information
Users must read and understand the product label and safety data sheet (SDS) for each system component. All users should acquaint themselves with this information prior to working with the products and follow the precautionary statements. SDSs can be obtained by contacting your local GCP representative or office, and in some cases from our local GCP website.
Storage
• Observe one-year shelf life and use on a first in, first out basis.
• Store in dry conditions between 5°C and 32°C.
• Store off ground, under tarps or otherwise protected from rain and ground moisture.
• See Technical Letter #TL-0030(AP) Shelf Life/Storage and Handling of GCP Waterproofing.
BITUTHENE® 3000 is a self-adhesive, rubberised asphalt/polyethylene waterproofng membrane for basements, and other subterranean applications.
GCP Applied Technologies’ (“GCP”) BITUTHENE 3000 Membrane combine a robust, flexible, high performance, cross laminated, HDPE carrier film with a tacky, self-adhesive rubberized asphalt compound specifically designed to adhere to cured concrete surfaces.
Product Advantages
• GCP (Singapore) Pte Ltd is certified to ISO 9001 and ISO 14001
• Specifically designed as a barrier to water, moisture and gas by physically isolating the structure from the surrounding substrate
• Resistant to hydrostatic head pressure
• Cross laminated film is dimensionally stable with, high tear strength, puncture and impact resistance
• Cold applied - No flame hazard; self-adhesive overlaps designed to provide membrane continuity
• Chemically resistant to most soil conditions, membrane is designed to provide effective external protection against aggressive soils and groundwater
• Flexible – Elongation in excess of 300% helps accommodate minor settlement and shrinkage movement
• Tanking security — combined flexible membrane and GCP waterstop system available for security
• Controlled thickness – Factory-made sheet allows for constant, non-variable site application
• Wide application window - BITUTHENE 3000 Membrane for use when surface and ambient temperatures are between 5°C and 35°C
Ancillary Components
• BITUTHENE Solvent Primer - bitumen-based primer used to prime dry structural concrete and masonry surfaces, with moisture content below 5.0%
• BITUTHENE Solvent Primer Vertical - bitumen-based high-tack primer for vertical applications in code weather, to dry (< 5.0% moisture content) structural concrete and masonry surfaces
• BITUTHENE Primer Type C - water borne bitumen-based primer, used to prime damp or green concrete, with moisture content below 10.0%
• BITUTHENE Liquid Membrane - two component, elastomeric, liquid applied detailing compound.
• PROTECTOBOARD™ /HYDRODUCT® - membrane protection/drainage system
• BITUSTIK™ Tape Super - double sided adhesive tape
• Water-Bar /Swellseal® waterstops – for construction and expansion joints
The most current Data Sheets for most system components are available at gcpat.com. For more information on any system or ancillary component contact your local GCP technical service advisor.
Limitations of Use
• Information contained in this document does not cover all possible application scenarios or imply product suitability for an application. Please contact your local GCP representative or the GCP Technical Department for further information.
• BITUTHENE Membranes are designed where in-service temperatures will not exceed 54°C.
• Do not use BITUTHENE Mastic to terminate BITUTHENE Membranes to PREPRUFE® pre-applied waterproofing membrane systems. Terminations to PREPRUFE membranes should only be done with BITUTHENE Liquid Membrane.
• Do not apply BITUTHENE Membranes over insulation or lightweight insulating concrete.
Safety and Handling Information
Users must read and understand the product label and safety data sheet (SDS) for each system component. All users should acquaint themselves with this information prior to working with the products and follow the precautionary statements. SDSs can be obtained by contacting your local GCP representative or office, and in some cases from our local GCP website.
Storage
• Observe one-year shelf life and use on a first in, first out basis.
• Store in dry conditions between 5°C and 32°C.
• Store off ground, under tarps or otherwise protected from rain and ground moisture.
• See Technical Letter #TL-0030(AP) Shelf Life/Storage and Handling of GCP Waterproofing.
BITUTHENE® 3000 is a self-adhesive, rubberised asphalt/polyethylene waterproofng membrane for basements, and other subterranean applications.
GCP Applied Technologies’ (“GCP”) BITUTHENE 3000 Membrane combine a robust, flexible, high performance, cross laminated, HDPE carrier film with a tacky, self-adhesive rubberized asphalt compound specifically designed to adhere to cured concrete surfaces.
Product Advantages
• GCP (Singapore) Pte Ltd is certified to ISO 9001 and ISO 14001
• Specifically designed as a barrier to water, moisture and gas by physically isolating the structure from the surrounding substrate
• Resistant to hydrostatic head pressure
• Cross laminated film is dimensionally stable with, high tear strength, puncture and impact resistance
• Cold applied - No flame hazard; self-adhesive overlaps designed to provide membrane continuity
• Chemically resistant to most soil conditions, membrane is designed to provide effective external protection against aggressive soils and groundwater
• Flexible – Elongation in excess of 300% helps accommodate minor settlement and shrinkage movement
• Tanking security — combined flexible membrane and GCP waterstop system available for security
• Controlled thickness – Factory-made sheet allows for constant, non-variable site application
• Wide application window - BITUTHENE 3000 Membrane for use when surface and ambient temperatures are between 5°C and 35°C
Ancillary Components
• BITUTHENE Solvent Primer - bitumen-based primer used to prime dry structural concrete and masonry surfaces, with moisture content below 5.0%
• BITUTHENE Solvent Primer Vertical - bitumen-based high-tack primer for vertical applications in code weather, to dry (< 5.0% moisture content) structural concrete and masonry surfaces
• BITUTHENE Primer Type C - water borne bitumen-based primer, used to prime damp or green concrete, with moisture content below 10.0%
• BITUTHENE Liquid Membrane - two component, elastomeric, liquid applied detailing compound.
• PROTECTOBOARD™ /HYDRODUCT® - membrane protection/drainage system
• BITUSTIK™ Tape Super - double sided adhesive tape
• Water-Bar /Swellseal® waterstops – for construction and expansion joints
The most current Data Sheets for most system components are available at gcpat.com. For more information on any system or ancillary component contact your local GCP technical service advisor.
Limitations of Use
• Information contained in this document does not cover all possible application scenarios or imply product suitability for an application. Please contact your local GCP representative or the GCP Technical Department for further information.
• BITUTHENE Membranes are designed where in-service temperatures will not exceed 54°C.
• Do not use BITUTHENE Mastic to terminate BITUTHENE Membranes to PREPRUFE® pre-applied waterproofing membrane systems. Terminations to PREPRUFE membranes should only be done with BITUTHENE Liquid Membrane.
• Do not apply BITUTHENE Membranes over insulation or lightweight insulating concrete.
Safety and Handling Information
Users must read and understand the product label and safety data sheet (SDS) for each system component. All users should acquaint themselves with this information prior to working with the products and follow the precautionary statements. SDSs can be obtained by contacting your local GCP representative or office, and in some cases from our local GCP website.
Storage
• Observe one-year shelf life and use on a first in, first out basis.
• Store in dry conditions between 5°C and 32°C.
• Store off ground, under tarps or otherwise protected from rain and ground moisture.
• See Technical Letter #TL-0030(AP) Shelf Life/Storage and Handling of GCP Waterproofing.
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
