- Australia
Solv Sealer Gold
Low Water Consumption
Recyclable Packaging
Sustainable Manufacturing Process
Australia
SKU: AP176.15 / AP176.05 / AP176.025 / AP176.005 Solv Sealer Gold provides premium “nano-molecule” protection to, natural fine stone, sandstone, pavers, bricks, porous tiles and grout. It’s extremely small molecular structure enables it to rapidly penetrate into the fine pores of natural stone, clay and cementicous materials. It provides long lasting, high performance protection against water and oil based contaminants, efflorescence and spalling. - Provides premium protection for up to 15 years. - Independently performance tested by NATA approved stone laboratory. BENEFITS - Precise Chemistry – Formulated using a precise blend of “nano – small particle” fluorochemical technology with specialist penetrating solvents to achieve a high level of penetration into small-pore, dense substrates. - Premium Protection – Provides premium protection against water and oil borne contaminants including; food and beverage stains, oil & greasy spills, biological growth such as mould & mildew, spalling, efflorescence, pollution and weathering. - Versatile Application – Solvent base chemistry provides premium protection to a wide range of substrates but with special distinction on natural stone surfaces, porous engineered stone and clay products. - Natural Look – Does not alter the natural look of fine stone nor change its surface texture, slip characteristics or colouring. - Surface Safe – Will not etch or cause discolouration of marble or fine stone. - Vapour Permeable – Won’t trap moisture. Allows natural stone to “breathe”. - Safe to Use – Solv Sealer Gold does not contain chlorinated hydrocarbons and is not a suspected carcinogen APPLICATION AREAS AND SURFACE SUITABILITY Formulated to provide ultimate protection from staining to all forms of fine stone, masonry and cementicous surfaces including: - Granite, marble, limestone, travertine. (Polished, honed, exfoliated, flamed or saw cut) - Basalt and Bluestone - Terracotta, Saltillo, Quarry and Terrazzo. - Sandstone and Slate. - Masonry and concrete. Expected Wear: Solv Sealer Gold will provide ultimate protection for up to 15 years. However application methods, weather conditions, traffic and harsh cleaning methods will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life. Cleaning with Actichem Proneutro is recommended. It is recommended that the sealer should be re-applied every 5 – 7 years where harsh conditions exist. Considerations: Not to be used as a sub-terrain waterproofing. Should not be applied if temperature is above 40 degrees or if rain is expected within 2 hours of application. If rain has preceded the application, the surface should be allowed 24 hours to dry completely. HOW TO USE Read and understand the SDS before use Always pre-test in an inconspicuous location for sensitivity to chemicals. Coverage can vary dramatically depending on the degree of porosity, but is normally 5 to 10 m2 / Lt per coat for open structure, highly porous substrates. And 10 to 20 m2 / Lt per coat for dense, less porous substrates. Note: Application on large concrete areas should be based on a preset coverage rate using a dedicated sprayer or painting equipment. No subsequent removal of excess product is required. Surface Preparation: New installations must be fully cured before application of Solv Sealer Gold (Min 48 hours, however some concrete installations may take up to 7 days to cure. Confirm with the structural engineer). Existing stone and grout must be totally clean, dry and chemical free. Coverage can vary dramatically depending on the degree of porosity, but is normally 5 to 15 m2 / Lt per coat for open structure, highly porous substrates and 10 to 20 m2 / Lt per coat for dense, less porous substrates. Do not apply in direct sunlight. Temperature must be between 10°C and 28°C. Highly absorbent surfaces will require two coats. DILUTIONS Ready to use APPLICATION - Apply 1 to 3 coats of Solv Sealer Gold by generously saturating the surface using a polish applicator, roller or sprayer to an area which can be easily reached. (Approximately 15m2). - Ensure even coverage. - The surface must be shiny wet with a liquid film for at least 1 minute. For very porous substrates more sealer may need to be applied. - Allow 5 – 10 minutes for the sealer to absorb into the surface and then move the excess product with a squeegee to a new section. - If a second coat is to be applied, wait 20 to 30 minutes and repeat the process. - Using absorbent toweling or applicator, wipe off any sealer remaining on the surface after 10 minutes of the last application. Moisten the towel with Methylated Spirits to remove residues which have dried on the surface. - Allow 12 hours before returning area to traffic. Keep dry for 24 hours. Achieves a full cure in 24-48 hours.
SKU: AP176.15 / AP176.05 / AP176.025 / AP176.005 Solv Sealer Gold provides premium “nano-molecule” protection to, natural fine stone, sandstone, pavers, bricks, porous tiles and grout. It’s extremely small molecular structure enables it to rapidly penetrate into the fine pores of natural stone, clay and cementicous materials. It provides long lasting, high performance protection against water and oil based contaminants, efflorescence and spalling. - Provides premium protection for up to 15 years. - Independently performance tested by NATA approved stone laboratory. BENEFITS - Precise Chemistry – Formulated using a precise blend of “nano – small particle” fluorochemical technology with specialist penetrating solvents to achieve a high level of penetration into small-pore, dense substrates. - Premium Protection – Provides premium protection against water and oil borne contaminants including; food and beverage stains, oil & greasy spills, biological growth such as mould & mildew, spalling, efflorescence, pollution and weathering. - Versatile Application – Solvent base chemistry provides premium protection to a wide range of substrates but with special distinction on natural stone surfaces, porous engineered stone and clay products. - Natural Look – Does not alter the natural look of fine stone nor change its surface texture, slip characteristics or colouring. - Surface Safe – Will not etch or cause discolouration of marble or fine stone. - Vapour Permeable – Won’t trap moisture. Allows natural stone to “breathe”. - Safe to Use – Solv Sealer Gold does not contain chlorinated hydrocarbons and is not a suspected carcinogen APPLICATION AREAS AND SURFACE SUITABILITY Formulated to provide ultimate protection from staining to all forms of fine stone, masonry and cementicous surfaces including: - Granite, marble, limestone, travertine. (Polished, honed, exfoliated, flamed or saw cut) - Basalt and Bluestone - Terracotta, Saltillo, Quarry and Terrazzo. - Sandstone and Slate. - Masonry and concrete. Expected Wear: Solv Sealer Gold will provide ultimate protection for up to 15 years. However application methods, weather conditions, traffic and harsh cleaning methods will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life. Cleaning with Actichem Proneutro is recommended. It is recommended that the sealer should be re-applied every 5 – 7 years where harsh conditions exist. Considerations: Not to be used as a sub-terrain waterproofing. Should not be applied if temperature is above 40 degrees or if rain is expected within 2 hours of application. If rain has preceded the application, the surface should be allowed 24 hours to dry completely. HOW TO USE Read and understand the SDS before use Always pre-test in an inconspicuous location for sensitivity to chemicals. Coverage can vary dramatically depending on the degree of porosity, but is normally 5 to 10 m2 / Lt per coat for open structure, highly porous substrates. And 10 to 20 m2 / Lt per coat for dense, less porous substrates. Note: Application on large concrete areas should be based on a preset coverage rate using a dedicated sprayer or painting equipment. No subsequent removal of excess product is required. Surface Preparation: New installations must be fully cured before application of Solv Sealer Gold (Min 48 hours, however some concrete installations may take up to 7 days to cure. Confirm with the structural engineer). Existing stone and grout must be totally clean, dry and chemical free. Coverage can vary dramatically depending on the degree of porosity, but is normally 5 to 15 m2 / Lt per coat for open structure, highly porous substrates and 10 to 20 m2 / Lt per coat for dense, less porous substrates. Do not apply in direct sunlight. Temperature must be between 10°C and 28°C. Highly absorbent surfaces will require two coats. DILUTIONS Ready to use APPLICATION - Apply 1 to 3 coats of Solv Sealer Gold by generously saturating the surface using a polish applicator, roller or sprayer to an area which can be easily reached. (Approximately 15m2). - Ensure even coverage. - The surface must be shiny wet with a liquid film for at least 1 minute. For very porous substrates more sealer may need to be applied. - Allow 5 – 10 minutes for the sealer to absorb into the surface and then move the excess product with a squeegee to a new section. - If a second coat is to be applied, wait 20 to 30 minutes and repeat the process. - Using absorbent toweling or applicator, wipe off any sealer remaining on the surface after 10 minutes of the last application. Moisten the towel with Methylated Spirits to remove residues which have dried on the surface. - Allow 12 hours before returning area to traffic. Keep dry for 24 hours. Achieves a full cure in 24-48 hours.
SKU: AP176.15 / AP176.05 / AP176.025 / AP176.005
Solv Sealer Gold provides premium “nano-molecule” protection to, natural fine stone, sandstone, pavers, bricks, porous tiles and grout. It’s extremely small molecular structure enables it to rapidly penetrate into the fine pores of natural stone, clay and cementicous materials. It provides long lasting, high performance protection against water and oil based contaminants, efflorescence and spalling.
- Provides premium protection for up to 15 years.
- Independently performance tested by NATA approved stone laboratory.
BENEFITS
- Precise Chemistry – Formulated using a precise blend of “nano – small particle” fluorochemical technology with specialist penetrating solvents to achieve a high level of penetration into small-pore, dense substrates.
- Premium Protection – Provides premium protection against water and oil borne contaminants including; food and beverage stains, oil & greasy spills, biological growth such as mould & mildew, spalling, efflorescence, pollution and weathering.
- Versatile Application – Solvent base chemistry provides premium protection to a wide range of substrates but with special distinction on natural stone surfaces, porous engineered stone and clay products.
- Natural Look – Does not alter the natural look of fine stone nor change its surface texture, slip characteristics or colouring.
- Surface Safe – Will not etch or cause discolouration of marble or fine stone.
- Vapour Permeable – Won’t trap moisture. Allows natural stone to “breathe”.
- Safe to Use – Solv Sealer Gold does not contain chlorinated hydrocarbons and is not a suspected carcinogen
APPLICATION AREAS AND SURFACE SUITABILITY
Formulated to provide ultimate protection from staining to all forms of fine stone, masonry and cementicous surfaces including:
- Granite, marble, limestone, travertine. (Polished, honed, exfoliated, flamed or saw cut)
- Basalt and Bluestone
- Terracotta, Saltillo, Quarry and Terrazzo.
- Sandstone and Slate.
- Masonry and concrete.
Expected Wear:
Solv Sealer Gold will provide ultimate protection for up to 15 years. However application methods, weather conditions, traffic and harsh cleaning methods will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life.
Cleaning with Actichem Proneutro is recommended.
It is recommended that the sealer should be re-applied every 5 – 7 years where harsh conditions exist.
Considerations:
Not to be used as a sub-terrain waterproofing. Should not be applied if temperature is above 40 degrees or if rain is expected within 2 hours of application. If rain has preceded the application, the surface should be allowed 24 hours to dry completely.
HOW TO USE
Read and understand the SDS before use
Always pre-test in an inconspicuous location for sensitivity to chemicals.
Coverage can vary dramatically depending on the degree of porosity, but is normally 5 to 10 m2 / Lt per coat for open structure, highly porous substrates. And 10 to 20 m2 / Lt per coat for dense, less porous substrates.
Note:
Application on large concrete areas should be based on a preset coverage rate using a dedicated sprayer or painting equipment. No subsequent removal of excess product is required.
Surface Preparation:
New installations must be fully cured before application of Solv Sealer Gold (Min 48 hours, however some concrete installations may take up to 7 days to cure. Confirm with the structural engineer).
Existing stone and grout must be totally clean, dry and chemical free.
Coverage can vary dramatically depending on the degree of porosity, but is normally 5 to 15 m2 / Lt per coat for open structure, highly porous substrates and 10 to 20 m2 / Lt per coat for dense, less porous substrates.
Do not apply in direct sunlight. Temperature must be between 10°C and 28°C.
Highly absorbent surfaces will require two coats.
DILUTIONS
Ready to use
APPLICATION
- Apply 1 to 3 coats of Solv Sealer Gold by generously saturating the surface using a polish applicator, roller or sprayer to an area which can be easily reached. (Approximately 15m2).
- Ensure even coverage.
- The surface must be shiny wet with a liquid film for at least 1 minute. For very porous substrates more sealer may need to be applied.
- Allow 5 – 10 minutes for the sealer to absorb into the surface and then move the excess product with a squeegee to a new section.
- If a second coat is to be applied, wait 20 to 30 minutes and repeat the process.
- Using absorbent toweling or applicator, wipe off any sealer remaining on the surface after 10 minutes of the last application. Moisten the towel with Methylated Spirits to remove residues which have dried on the surface.
- Allow 12 hours before returning area to traffic. Keep dry for 24 hours. Achieves a full cure in 24-48 hours.
Solv Sealer Gold provides premium “nano-molecule” protection to, natural fine stone, sandstone, pavers, bricks, porous tiles and grout. It’s extremely small molecular structure enables it to rapidly penetrate into the fine pores of natural stone, clay and cementicous materials. It provides long lasting, high performance protection against water and oil based contaminants, efflorescence and spalling.
- Provides premium protection for up to 15 years.
- Independently performance tested by NATA approved stone laboratory.
BENEFITS
- Precise Chemistry – Formulated using a precise blend of “nano – small particle” fluorochemical technology with specialist penetrating solvents to achieve a high level of penetration into small-pore, dense substrates.
- Premium Protection – Provides premium protection against water and oil borne contaminants including; food and beverage stains, oil & greasy spills, biological growth such as mould & mildew, spalling, efflorescence, pollution and weathering.
- Versatile Application – Solvent base chemistry provides premium protection to a wide range of substrates but with special distinction on natural stone surfaces, porous engineered stone and clay products.
- Natural Look – Does not alter the natural look of fine stone nor change its surface texture, slip characteristics or colouring.
- Surface Safe – Will not etch or cause discolouration of marble or fine stone.
- Vapour Permeable – Won’t trap moisture. Allows natural stone to “breathe”.
- Safe to Use – Solv Sealer Gold does not contain chlorinated hydrocarbons and is not a suspected carcinogen
APPLICATION AREAS AND SURFACE SUITABILITY
Formulated to provide ultimate protection from staining to all forms of fine stone, masonry and cementicous surfaces including:
- Granite, marble, limestone, travertine. (Polished, honed, exfoliated, flamed or saw cut)
- Basalt and Bluestone
- Terracotta, Saltillo, Quarry and Terrazzo.
- Sandstone and Slate.
- Masonry and concrete.
Expected Wear:
Solv Sealer Gold will provide ultimate protection for up to 15 years. However application methods, weather conditions, traffic and harsh cleaning methods will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life.
Cleaning with Actichem Proneutro is recommended.
It is recommended that the sealer should be re-applied every 5 – 7 years where harsh conditions exist.
Considerations:
Not to be used as a sub-terrain waterproofing. Should not be applied if temperature is above 40 degrees or if rain is expected within 2 hours of application. If rain has preceded the application, the surface should be allowed 24 hours to dry completely.
HOW TO USE
Read and understand the SDS before use
Always pre-test in an inconspicuous location for sensitivity to chemicals.
Coverage can vary dramatically depending on the degree of porosity, but is normally 5 to 10 m2 / Lt per coat for open structure, highly porous substrates. And 10 to 20 m2 / Lt per coat for dense, less porous substrates.
Note:
Application on large concrete areas should be based on a preset coverage rate using a dedicated sprayer or painting equipment. No subsequent removal of excess product is required.
Surface Preparation:
New installations must be fully cured before application of Solv Sealer Gold (Min 48 hours, however some concrete installations may take up to 7 days to cure. Confirm with the structural engineer).
Existing stone and grout must be totally clean, dry and chemical free.
Coverage can vary dramatically depending on the degree of porosity, but is normally 5 to 15 m2 / Lt per coat for open structure, highly porous substrates and 10 to 20 m2 / Lt per coat for dense, less porous substrates.
Do not apply in direct sunlight. Temperature must be between 10°C and 28°C.
Highly absorbent surfaces will require two coats.
DILUTIONS
Ready to use
APPLICATION
- Apply 1 to 3 coats of Solv Sealer Gold by generously saturating the surface using a polish applicator, roller or sprayer to an area which can be easily reached. (Approximately 15m2).
- Ensure even coverage.
- The surface must be shiny wet with a liquid film for at least 1 minute. For very porous substrates more sealer may need to be applied.
- Allow 5 – 10 minutes for the sealer to absorb into the surface and then move the excess product with a squeegee to a new section.
- If a second coat is to be applied, wait 20 to 30 minutes and repeat the process.
- Using absorbent toweling or applicator, wipe off any sealer remaining on the surface after 10 minutes of the last application. Moisten the towel with Methylated Spirits to remove residues which have dried on the surface.
- Allow 12 hours before returning area to traffic. Keep dry for 24 hours. Achieves a full cure in 24-48 hours.
Classification Code
Surespec | : |
0632b-Stone Tiling
0274-Concrete pavement
0276-Paving - Sand bed
0631-Ceramic Tiling
0632a-Terrazzo Tiling
|
Speedspec | : |
09300-Ceramic tiling
09630-Stone flooring & wall panels
02910-Landscape works
02780-Unit pavers
|
General Specification
Base | : | Solvent |
Type | : | Concrete & masonry |
Colour | : | Clear (water white) |
Premium protection | : | Up to 15 years |
Application | : | Granite, marble, limestone, travertine. (Polished, honed, exfoliated, flamed or saw cut) | Basalt and Bluestone | Terracotta | Saltillo | Quarry | Terrazzo | Sandstone | Slate | Masonry | Concrete |
Size
Volume | : | 15 litre |
Pack sizes | : | Pack 1: 15 Lt | Pack 2: 5 Lt | Pack 3: 500 ml |
Coverage | : | 5 to 25 m2 / Litre per coat |
Technical
pH | : | N/A |
Fragrance | : | Solvent |
Dilution | : | Ready to use |
Safety | : | Flammable |
How to use | : | Read and understand the MSDS before use Always pre-test in an inconspicuous location for sensitivity to chemicals |
Recommended Temperature | : | Between 10°C and 28°C |
Full Cure | : | 24 - 48 hours |
Dry Time | : | 24 hours |
Applicator | : | Polish applicator | Roller | Sprayer |
Certification
Safety profile | : | Class 3 Flammable |
Performance tested | : | NATA approved stone laboratory |
Other Products You Might Like
Other Products You Might Like