Product Code: 59P84191
Dulux envirO2 water based Acrylic Sealer Undercoat is a very low VOC, low odour premium coating. It has high opacity and excellent coverage.
Dulux envirO2 Acrylic Sealer Undercoat is a very low VOC* and low odour premium prepcoat that seals and undercoats most interior surfaces to even out surface porosity. With high opacity and easy sanding, it is particularly recommended for bare plasterboard.
Benefits :
- Seals and undercoats most interior surfaces to even out surface porosity
- High opacity and superior sanding
Features :
- Water based
- Sealer and undercoat in one
- Superior sanding and quick drying
Uses :
Seals and undercoats most interior surfaces to even out surface porosity ready for top coat application. With excellent hiding power and easy sanding, it is ideal for bare plasterboard. Suitable for Green Star, WELL, LBC building projects.
Precautions And Limitations :
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not use at temperatures below 10C,or when the temperature of surface may fall below 10C during the drying period. Not recommended for application at temperatures higher than 28C. Avoid exposure to steam and condensation for 48 hours after application. Although the film is touch dry in 30 minutes allow 7 days for film to fully cure before washing.
Surface Preparation :
All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil. Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint Spot prime bare areas.
Note : To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down.
Application Procedure And Equipment :
- Brush, roller, spray
- Stir well before use with a broad, flat paddle using an up and down scooping action. Apply 2 coats of DULUX Professional EnvirO2 Tintable Ceiling Flat. Thin with up to 100ml per litre of water if necessary.
Protective Equipment :
Personal Protective Equipment: Wear eye protection.
Health Effects :
For detailed information refer to the product label and the current Material Safety Data Sheet available through the Dulux Australia toll free phone 13 23 77. Health effects: Splashes to the eye may cause eye irritation.
Product Code: 59P84191
Dulux envirO2 water based Acrylic Sealer Undercoat is a very low VOC, low odour premium coating. It has high opacity and excellent coverage.
Dulux envirO2 Acrylic Sealer Undercoat is a very low VOC* and low odour premium prepcoat that seals and undercoats most interior surfaces to even out surface porosity. With high opacity and easy sanding, it is particularly recommended for bare plasterboard.
Benefits :
- Seals and undercoats most interior surfaces to even out surface porosity
- High opacity and superior sanding
Features :
- Water based
- Sealer and undercoat in one
- Superior sanding and quick drying
Uses :
Seals and undercoats most interior surfaces to even out surface porosity ready for top coat application. With excellent hiding power and easy sanding, it is ideal for bare plasterboard. Suitable for Green Star, WELL, LBC building projects.
Precautions And Limitations :
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not use at temperatures below 10C,or when the temperature of surface may fall below 10C during the drying period. Not recommended for application at temperatures higher than 28C. Avoid exposure to steam and condensation for 48 hours after application. Although the film is touch dry in 30 minutes allow 7 days for film to fully cure before washing.
Surface Preparation :
All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil. Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint Spot prime bare areas.
Note : To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down.
Application Procedure And Equipment :
- Brush, roller, spray
- Stir well before use with a broad, flat paddle using an up and down scooping action. Apply 2 coats of DULUX Professional EnvirO2 Tintable Ceiling Flat. Thin with up to 100ml per litre of water if necessary.
Protective Equipment :
Personal Protective Equipment: Wear eye protection.
Health Effects :
For detailed information refer to the product label and the current Material Safety Data Sheet available through the Dulux Australia toll free phone 13 23 77. Health effects: Splashes to the eye may cause eye irritation.
Product Code: 59P84191
Dulux envirO2 water based Acrylic Sealer Undercoat is a very low VOC, low odour premium coating. It has high opacity and excellent coverage.
Dulux envirO2 Acrylic Sealer Undercoat is a very low VOC* and low odour premium prepcoat that seals and undercoats most interior surfaces to even out surface porosity. With high opacity and easy sanding, it is particularly recommended for bare plasterboard.
Benefits :
- Seals and undercoats most interior surfaces to even out surface porosity
- High opacity and superior sanding
Features :
- Water based
- Sealer and undercoat in one
- Superior sanding and quick drying
Uses :
Seals and undercoats most interior surfaces to even out surface porosity ready for top coat application. With excellent hiding power and easy sanding, it is ideal for bare plasterboard. Suitable for Green Star, WELL, LBC building projects.
Precautions And Limitations :
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not use at temperatures below 10C,or when the temperature of surface may fall below 10C during the drying period. Not recommended for application at temperatures higher than 28C. Avoid exposure to steam and condensation for 48 hours after application. Although the film is touch dry in 30 minutes allow 7 days for film to fully cure before washing.
Surface Preparation :
All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil. Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint Spot prime bare areas.
Note : To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down.
Application Procedure And Equipment :
- Brush, roller, spray
- Stir well before use with a broad, flat paddle using an up and down scooping action. Apply 2 coats of DULUX Professional EnvirO2 Tintable Ceiling Flat. Thin with up to 100ml per litre of water if necessary.
Protective Equipment :
Personal Protective Equipment: Wear eye protection.
Health Effects :
For detailed information refer to the product label and the current Material Safety Data Sheet available through the Dulux Australia toll free phone 13 23 77. Health effects: Splashes to the eye may cause eye irritation.