Product Code: 59L84179
Dulux envirO2 Interior Low Sheen is a very low VOC* and low odour premium paint. It contains mould protection to help prevent mould growth. It produces a washable, stain resistant and hard wearing finish suitable for all interior living areas.
Benefits :
- Helps prevent mould growth
- Hard wearing finish suitable for all living areas
Features :
- Water based premium acrylic paint
- Produces a hard wearing finish
- Washable and stain resistant
Uses :
Suitable for all interior living areas and Green Star, WELL, LBC building projects.
Precautions And Limitations :
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not use at temperatures below 10°C,or when the temperature of surface may fall below 10°C during the drying period. Not recommended for application at temperatures higher than 28°C. Avoid exposure to steam and condensation for 48 hours after application. Although the film is touch dry in 30 minutes allow 7 days for film to fully cure before washing.
Cleaning schedule: After application, allow the surface to dry for 7 days prior to cleaning. Do not scrub the surface, use abrasive cleaners or solvent. The
surface should be wiped down with a soft damp cloth using mild detergent such as Spray & Wipe or similar.
Darker colours will show more signs of marking and scuffing than lighter colours - if you are considering using a dark colour in a high traffic area you may want to consider a higher sheen level or the use of a protective clear coat.
Surface Preparation :
All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil.
Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint. Spot prime bare areas.
Note : To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down.
Application Procedure And Equipment :
- Brush, roller, spray
- Stir well before use with a broad, flat paddle using an up and down scooping action. Apply 2 coats of DULUX Professional EnvirO2 Tintable Ceiling Flat. Thin with up to 100ml per litre of water if necessary.
Protective Equipment ;
Personal Protective Equipment: Wear eye protection. When spraying, wearing a disposable face mask is advisable.
Health Effects :
For detailed information refer to the product label and the current Material Safety Data Sheet available by calling Dulux Australia Toll free phone 13 23 77. Health effects: Splashes to the eye may cause eye irritation.
Product Code: 59L84179
Dulux envirO2 Interior Low Sheen is a very low VOC* and low odour premium paint. It contains mould protection to help prevent mould growth. It produces a washable, stain resistant and hard wearing finish suitable for all interior living areas.
Benefits :
- Helps prevent mould growth
- Hard wearing finish suitable for all living areas
Features :
- Water based premium acrylic paint
- Produces a hard wearing finish
- Washable and stain resistant
Uses :
Suitable for all interior living areas and Green Star, WELL, LBC building projects.
Precautions And Limitations :
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not use at temperatures below 10°C,or when the temperature of surface may fall below 10°C during the drying period. Not recommended for application at temperatures higher than 28°C. Avoid exposure to steam and condensation for 48 hours after application. Although the film is touch dry in 30 minutes allow 7 days for film to fully cure before washing.
Cleaning schedule: After application, allow the surface to dry for 7 days prior to cleaning. Do not scrub the surface, use abrasive cleaners or solvent. The
surface should be wiped down with a soft damp cloth using mild detergent such as Spray & Wipe or similar.
Darker colours will show more signs of marking and scuffing than lighter colours - if you are considering using a dark colour in a high traffic area you may want to consider a higher sheen level or the use of a protective clear coat.
Surface Preparation :
All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil.
Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint. Spot prime bare areas.
Note : To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down.
Application Procedure And Equipment :
- Brush, roller, spray
- Stir well before use with a broad, flat paddle using an up and down scooping action. Apply 2 coats of DULUX Professional EnvirO2 Tintable Ceiling Flat. Thin with up to 100ml per litre of water if necessary.
Protective Equipment ;
Personal Protective Equipment: Wear eye protection. When spraying, wearing a disposable face mask is advisable.
Health Effects :
For detailed information refer to the product label and the current Material Safety Data Sheet available by calling Dulux Australia Toll free phone 13 23 77. Health effects: Splashes to the eye may cause eye irritation.
Product Code: 59L84179
Dulux envirO2 Interior Low Sheen is a very low VOC* and low odour premium paint. It contains mould protection to help prevent mould growth. It produces a washable, stain resistant and hard wearing finish suitable for all interior living areas.
Benefits :
- Helps prevent mould growth
- Hard wearing finish suitable for all living areas
Features :
- Water based premium acrylic paint
- Produces a hard wearing finish
- Washable and stain resistant
Uses :
Suitable for all interior living areas and Green Star, WELL, LBC building projects.
Precautions And Limitations :
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not use at temperatures below 10°C,or when the temperature of surface may fall below 10°C during the drying period. Not recommended for application at temperatures higher than 28°C. Avoid exposure to steam and condensation for 48 hours after application. Although the film is touch dry in 30 minutes allow 7 days for film to fully cure before washing.
Cleaning schedule: After application, allow the surface to dry for 7 days prior to cleaning. Do not scrub the surface, use abrasive cleaners or solvent. The
surface should be wiped down with a soft damp cloth using mild detergent such as Spray & Wipe or similar.
Darker colours will show more signs of marking and scuffing than lighter colours - if you are considering using a dark colour in a high traffic area you may want to consider a higher sheen level or the use of a protective clear coat.
Surface Preparation :
All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil.
Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint. Spot prime bare areas.
Note : To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down.
Application Procedure And Equipment :
- Brush, roller, spray
- Stir well before use with a broad, flat paddle using an up and down scooping action. Apply 2 coats of DULUX Professional EnvirO2 Tintable Ceiling Flat. Thin with up to 100ml per litre of water if necessary.
Protective Equipment ;
Personal Protective Equipment: Wear eye protection. When spraying, wearing a disposable face mask is advisable.
Health Effects :
For detailed information refer to the product label and the current Material Safety Data Sheet available by calling Dulux Australia Toll free phone 13 23 77. Health effects: Splashes to the eye may cause eye irritation.