- Australia
Intergrain Enviropro Invisible Floor Finish
Product Code: AU_DW02768 Enviropro Invisible Floor Finish is a hard-wearing clear finish designed for most timber flooring and other interior timber. This new-generation technology gives an invisible sheen finish that has the appearance of bare wood and provides the feel of natural timber. Enviropro Invisible Floor Finish removes the glossy appearance from existing timber floors with one coat and no sanding, helping transform and modernise whilst providing excellent water, stain and abrasion resistance. A quick drying time (recoat in 4 hours) and low odour make Enviropro Invisible Floor Finish a great choice for residential projects. Features: - Invisible sheen - No sealer required - No sanding required when applying over existing coating* Uses : Interior timber flooring and other interior timber Precautions And Limitations : Do not apply if air or substrate temperatures are above 35°C or below 10°C. *Ensure existing coating remains in sound condition. If coating is not in sound condition, it will need to be sanded back. Application : • It is recommended to shield doorways, fireplaces and windows from dust, dirt or other contaminants settling on the surface between coats, as this will affect the finished appearance. Do not completely seal, as adequate ventilation is required to assist with drying. • Do not apply if air or substrate temperatures are above 35°C or below 10°C. • If using in temperatures above 30°C, Enviropro Wet Edge Extender can be added to Invisible Floor Finish to a maximum of 5% to ease application, follow instructions on the Wet Edge Extender label. • If using more than one pack of Invisible Floor Finish, it is recommended to mix all packs together to achieve product uniformity before use. • For added durability and stain resistance, add 1 part Enviropro Endure 2 Pack Part B to 9 parts Invisible Floor Finish. Application Procedure And Equipment : MIXING Shake Invisible Floor Finish for at least 1 minute to ensure any settled matting agent is reincorporated. Strain product before use. It is recommended to shield doorways, fireplaces and windows from dust, dirt or other contaminants settling on the surface between coats, as this will affect the finished appearance. Do not completely seal, as adequate ventilation is required to assist with drying. Do not apply if air or substrate temperatures are above 35°C or below 10°C. If using in temperatures above 30°C, Enviropro Wet Edge Extender can be added to Invisible Floor Finish to a maximum of 5% to ease application, follow instructions on the Wet Edge Extender label. If using more than one pack of Invisible Floor Finish, it is recommended to mix all packs together to achieve product uniformity before use. For added durability and stain resistance, add 1 part Enviropro Endure 2 Pack Part B to 9 parts Invisible Floor Finish. NEW TIMBER Apply 2 coats of Invisible Floor Finish. Cut in edges using a brush along the grain, then apply to the rest of the surface using a 10mm nap microfibre roller. Finishing strokes should be in the direction of the grain. If required, lightly sand between coats to remove any grain raise. To increase the wear resistance, apply 3 coats of Invisible Floor Finish. On porous timbers, apply 3 coats of Invisible Floor Finish to ensure a uniform finish. PREVIOUSLY FINISHED SURFACES Including Floating Floors. To ensure adhesion, a test patch is recommended after the surface has been prepared. Apply a small test area with one coat of Invisible Floor Finish, allow to dry for 24 hours then firmly press a strip of sticky tape over the coating and rip off quickly. If the coating is removed, sand the full surface back to bare timber. If the coating is not removed, apply 1–2 coats of Invisible Floor Finish using a 10mm nap microfibre roller and brush edges as per new floor application. Apply 2 coats for optimal durability and stain resistance. SLIP RESISTANCE Intergrain UltraGrip can be added to Invisible Floor Finish to achieve a more slip resistant finish. For more information about system requirements refer to the datasheet on www.duspec.com.au. Add UltraGrip according to product instructions. Surface Preparation : All surfaces must be clean, dry, free of wax, grease, dust and other contaminants. The presence of contaminants increases the possibility of rejection and delamination. Prepare cork in accordance with cork manufacturer’s instructions. All nail holes and cracks should be filled with Intergrain Woodblend putty. Do not use linseed oil putty. Ensure floor is even; sand to a flat even surface if required. Final sand should be with 150 mesh screenback, and vacuum thoroughly with a commercial grade vacuum cleaner to remove all sanding dust. Using Safety Precautions : Avoid contact with skin and eyes. Avoid breathing dust, fume, gas, mist, vapour or spray. Wear overalls, safety shoes, impervious gloves and safety glasses. Use only in well ventilated areas. Wash hands after use. Keep containers closed when not in use. Health Effects : FIRST AID: If poisoning occurs, contact a Doctor or Poisons Information Centre (Phone Australia 131 126; New Zealand 0800 764 766). If medical advice is needed, have product container or label at hand. SWALLOWED: If swallowed, do NOT induce vomiting. Give a glass of water. Seek medical advice. EYE: If in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor. SKIN: If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If irritation occurs seek medical advice. INHALED: Remove from contaminated area. Seek medical advice. Fire Suppression : If material is involved in a fire use water fog (or if unavailable fine water spray), alcohol resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder). Protective Equipment : Wear overalls, safety shoes, impervious gloves and safety glasses
Product Code: AU_DW02768 Enviropro Invisible Floor Finish is a hard-wearing clear finish designed for most timber flooring and other interior timber. This new-generation technology gives an invisible sheen finish that has the appearance of bare wood and provides the feel of natural timber. Enviropro Invisible Floor Finish removes the glossy appearance from existing timber floors with one coat and no sanding, helping transform and modernise whilst providing excellent water, stain and abrasion resistance. A quick drying time (recoat in 4 hours) and low odour make Enviropro Invisible Floor Finish a great choice for residential projects. Features: - Invisible sheen - No sealer required - No sanding required when applying over existing coating* Uses : Interior timber flooring and other interior timber Precautions And Limitations : Do not apply if air or substrate temperatures are above 35°C or below 10°C. *Ensure existing coating remains in sound condition. If coating is not in sound condition, it will need to be sanded back. Application : • It is recommended to shield doorways, fireplaces and windows from dust, dirt or other contaminants settling on the surface between coats, as this will affect the finished appearance. Do not completely seal, as adequate ventilation is required to assist with drying. • Do not apply if air or substrate temperatures are above 35°C or below 10°C. • If using in temperatures above 30°C, Enviropro Wet Edge Extender can be added to Invisible Floor Finish to a maximum of 5% to ease application, follow instructions on the Wet Edge Extender label. • If using more than one pack of Invisible Floor Finish, it is recommended to mix all packs together to achieve product uniformity before use. • For added durability and stain resistance, add 1 part Enviropro Endure 2 Pack Part B to 9 parts Invisible Floor Finish. Application Procedure And Equipment : MIXING Shake Invisible Floor Finish for at least 1 minute to ensure any settled matting agent is reincorporated. Strain product before use. It is recommended to shield doorways, fireplaces and windows from dust, dirt or other contaminants settling on the surface between coats, as this will affect the finished appearance. Do not completely seal, as adequate ventilation is required to assist with drying. Do not apply if air or substrate temperatures are above 35°C or below 10°C. If using in temperatures above 30°C, Enviropro Wet Edge Extender can be added to Invisible Floor Finish to a maximum of 5% to ease application, follow instructions on the Wet Edge Extender label. If using more than one pack of Invisible Floor Finish, it is recommended to mix all packs together to achieve product uniformity before use. For added durability and stain resistance, add 1 part Enviropro Endure 2 Pack Part B to 9 parts Invisible Floor Finish. NEW TIMBER Apply 2 coats of Invisible Floor Finish. Cut in edges using a brush along the grain, then apply to the rest of the surface using a 10mm nap microfibre roller. Finishing strokes should be in the direction of the grain. If required, lightly sand between coats to remove any grain raise. To increase the wear resistance, apply 3 coats of Invisible Floor Finish. On porous timbers, apply 3 coats of Invisible Floor Finish to ensure a uniform finish. PREVIOUSLY FINISHED SURFACES Including Floating Floors. To ensure adhesion, a test patch is recommended after the surface has been prepared. Apply a small test area with one coat of Invisible Floor Finish, allow to dry for 24 hours then firmly press a strip of sticky tape over the coating and rip off quickly. If the coating is removed, sand the full surface back to bare timber. If the coating is not removed, apply 1–2 coats of Invisible Floor Finish using a 10mm nap microfibre roller and brush edges as per new floor application. Apply 2 coats for optimal durability and stain resistance. SLIP RESISTANCE Intergrain UltraGrip can be added to Invisible Floor Finish to achieve a more slip resistant finish. For more information about system requirements refer to the datasheet on www.duspec.com.au. Add UltraGrip according to product instructions. Surface Preparation : All surfaces must be clean, dry, free of wax, grease, dust and other contaminants. The presence of contaminants increases the possibility of rejection and delamination. Prepare cork in accordance with cork manufacturer’s instructions. All nail holes and cracks should be filled with Intergrain Woodblend putty. Do not use linseed oil putty. Ensure floor is even; sand to a flat even surface if required. Final sand should be with 150 mesh screenback, and vacuum thoroughly with a commercial grade vacuum cleaner to remove all sanding dust. Using Safety Precautions : Avoid contact with skin and eyes. Avoid breathing dust, fume, gas, mist, vapour or spray. Wear overalls, safety shoes, impervious gloves and safety glasses. Use only in well ventilated areas. Wash hands after use. Keep containers closed when not in use. Health Effects : FIRST AID: If poisoning occurs, contact a Doctor or Poisons Information Centre (Phone Australia 131 126; New Zealand 0800 764 766). If medical advice is needed, have product container or label at hand. SWALLOWED: If swallowed, do NOT induce vomiting. Give a glass of water. Seek medical advice. EYE: If in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor. SKIN: If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If irritation occurs seek medical advice. INHALED: Remove from contaminated area. Seek medical advice. Fire Suppression : If material is involved in a fire use water fog (or if unavailable fine water spray), alcohol resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder). Protective Equipment : Wear overalls, safety shoes, impervious gloves and safety glasses
Product Code: AU_DW02768
Enviropro Invisible Floor Finish is a hard-wearing clear finish designed for most timber flooring and other interior timber. This new-generation technology gives an invisible sheen finish that has the appearance of bare wood and provides the feel of natural timber. Enviropro Invisible Floor Finish removes the glossy appearance from existing timber floors with one coat and no sanding, helping transform and modernise whilst providing excellent water, stain and abrasion resistance. A quick drying time (recoat in 4 hours) and low odour make Enviropro Invisible Floor Finish a great choice for residential projects.
Features:
- Invisible sheen
- No sealer required
- No sanding required when applying over existing coating*
Uses :
Interior timber flooring and other interior timber
Precautions And Limitations :
Do not apply if air or substrate temperatures are above 35°C or below 10°C.
*Ensure existing coating remains in sound condition. If coating is not in sound condition, it will need to be sanded back.
Application :
• It is recommended to shield doorways, fireplaces and windows from dust, dirt or other contaminants settling on the surface between coats, as this will affect the finished appearance. Do not completely seal, as adequate ventilation is required to assist with drying.
• Do not apply if air or substrate temperatures are above 35°C or below 10°C.
• If using in temperatures above 30°C, Enviropro Wet Edge Extender can be added to Invisible Floor Finish to a maximum of 5% to ease application, follow instructions on the Wet Edge Extender label.
• If using more than one pack of Invisible Floor Finish, it is recommended to mix all packs together to achieve product uniformity before use.
• For added durability and stain resistance, add 1 part Enviropro Endure 2 Pack Part B to 9 parts Invisible Floor Finish.
Application Procedure And Equipment :
MIXING
Shake Invisible Floor Finish for at least 1 minute to ensure any settled matting agent is reincorporated. Strain product before use.
It is recommended to shield doorways, fireplaces and windows from dust, dirt or other contaminants settling on the surface between coats, as this will affect the finished appearance. Do not completely seal, as adequate ventilation is required to assist with drying.
Do not apply if air or substrate temperatures are above 35°C or below 10°C.
If using in temperatures above 30°C, Enviropro Wet Edge Extender can be added to Invisible Floor Finish to a maximum of 5% to ease application, follow instructions on the Wet Edge Extender label.
If using more than one pack of Invisible Floor Finish, it is recommended to mix all packs together to achieve product uniformity before use.
For added durability and stain resistance, add 1 part Enviropro Endure 2 Pack Part B to 9 parts Invisible Floor Finish.
NEW TIMBER
Apply 2 coats of Invisible Floor Finish. Cut in edges using a brush along the grain, then apply to the rest of the surface using a 10mm nap microfibre roller. Finishing strokes should be in the direction of the grain. If required, lightly sand between coats to remove any grain raise.
To increase the wear resistance, apply 3 coats of Invisible Floor Finish. On porous timbers, apply 3 coats of Invisible Floor Finish to ensure a uniform finish.
PREVIOUSLY FINISHED SURFACES
Including Floating Floors. To ensure adhesion, a test patch is recommended after the surface has been prepared. Apply a small test area with one coat of Invisible Floor Finish, allow to dry for 24 hours then firmly press a strip of sticky tape over the coating and rip off quickly. If the coating is removed, sand the full surface back to bare timber. If the coating is not removed, apply 1–2 coats of Invisible Floor Finish using a 10mm nap microfibre roller and brush edges as per new floor application. Apply 2 coats for optimal durability and stain resistance.
SLIP RESISTANCE
Intergrain UltraGrip can be added to Invisible Floor Finish to achieve a more slip resistant finish. For more information about system requirements refer to the datasheet on www.duspec.com.au. Add UltraGrip according to product instructions.
Surface Preparation :
All surfaces must be clean, dry, free of wax, grease, dust and other contaminants. The presence of contaminants increases the possibility of rejection and delamination. Prepare cork in accordance with cork manufacturer’s instructions. All nail holes and cracks should be filled with Intergrain Woodblend putty. Do not use linseed oil putty. Ensure floor is even; sand to a flat even surface if required. Final sand should be with 150 mesh screenback, and vacuum thoroughly with a commercial grade vacuum cleaner to remove all sanding dust.
Using Safety Precautions :
Avoid contact with skin and eyes. Avoid breathing dust, fume, gas, mist, vapour or spray. Wear overalls, safety shoes, impervious gloves and safety glasses. Use only in well ventilated areas. Wash hands after use. Keep containers closed when not in use.
Health Effects :
FIRST AID: If poisoning occurs, contact a Doctor or Poisons Information Centre (Phone Australia 131 126; New Zealand 0800 764 766). If medical advice is needed, have product container or label at hand.
SWALLOWED: If swallowed, do NOT induce vomiting. Give a glass of water. Seek medical advice.
EYE: If in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor.
SKIN: If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If irritation occurs seek medical advice.
INHALED: Remove from contaminated area. Seek medical advice.
Fire Suppression :
If material is involved in a fire use water fog (or if unavailable fine water spray), alcohol resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder).
Protective Equipment :
Wear overalls, safety shoes, impervious gloves and safety glasses
Enviropro Invisible Floor Finish is a hard-wearing clear finish designed for most timber flooring and other interior timber. This new-generation technology gives an invisible sheen finish that has the appearance of bare wood and provides the feel of natural timber. Enviropro Invisible Floor Finish removes the glossy appearance from existing timber floors with one coat and no sanding, helping transform and modernise whilst providing excellent water, stain and abrasion resistance. A quick drying time (recoat in 4 hours) and low odour make Enviropro Invisible Floor Finish a great choice for residential projects.
Features:
- Invisible sheen
- No sealer required
- No sanding required when applying over existing coating*
Uses :
Interior timber flooring and other interior timber
Precautions And Limitations :
Do not apply if air or substrate temperatures are above 35°C or below 10°C.
*Ensure existing coating remains in sound condition. If coating is not in sound condition, it will need to be sanded back.
Application :
• It is recommended to shield doorways, fireplaces and windows from dust, dirt or other contaminants settling on the surface between coats, as this will affect the finished appearance. Do not completely seal, as adequate ventilation is required to assist with drying.
• Do not apply if air or substrate temperatures are above 35°C or below 10°C.
• If using in temperatures above 30°C, Enviropro Wet Edge Extender can be added to Invisible Floor Finish to a maximum of 5% to ease application, follow instructions on the Wet Edge Extender label.
• If using more than one pack of Invisible Floor Finish, it is recommended to mix all packs together to achieve product uniformity before use.
• For added durability and stain resistance, add 1 part Enviropro Endure 2 Pack Part B to 9 parts Invisible Floor Finish.
Application Procedure And Equipment :
MIXING
Shake Invisible Floor Finish for at least 1 minute to ensure any settled matting agent is reincorporated. Strain product before use.
It is recommended to shield doorways, fireplaces and windows from dust, dirt or other contaminants settling on the surface between coats, as this will affect the finished appearance. Do not completely seal, as adequate ventilation is required to assist with drying.
Do not apply if air or substrate temperatures are above 35°C or below 10°C.
If using in temperatures above 30°C, Enviropro Wet Edge Extender can be added to Invisible Floor Finish to a maximum of 5% to ease application, follow instructions on the Wet Edge Extender label.
If using more than one pack of Invisible Floor Finish, it is recommended to mix all packs together to achieve product uniformity before use.
For added durability and stain resistance, add 1 part Enviropro Endure 2 Pack Part B to 9 parts Invisible Floor Finish.
NEW TIMBER
Apply 2 coats of Invisible Floor Finish. Cut in edges using a brush along the grain, then apply to the rest of the surface using a 10mm nap microfibre roller. Finishing strokes should be in the direction of the grain. If required, lightly sand between coats to remove any grain raise.
To increase the wear resistance, apply 3 coats of Invisible Floor Finish. On porous timbers, apply 3 coats of Invisible Floor Finish to ensure a uniform finish.
PREVIOUSLY FINISHED SURFACES
Including Floating Floors. To ensure adhesion, a test patch is recommended after the surface has been prepared. Apply a small test area with one coat of Invisible Floor Finish, allow to dry for 24 hours then firmly press a strip of sticky tape over the coating and rip off quickly. If the coating is removed, sand the full surface back to bare timber. If the coating is not removed, apply 1–2 coats of Invisible Floor Finish using a 10mm nap microfibre roller and brush edges as per new floor application. Apply 2 coats for optimal durability and stain resistance.
SLIP RESISTANCE
Intergrain UltraGrip can be added to Invisible Floor Finish to achieve a more slip resistant finish. For more information about system requirements refer to the datasheet on www.duspec.com.au. Add UltraGrip according to product instructions.
Surface Preparation :
All surfaces must be clean, dry, free of wax, grease, dust and other contaminants. The presence of contaminants increases the possibility of rejection and delamination. Prepare cork in accordance with cork manufacturer’s instructions. All nail holes and cracks should be filled with Intergrain Woodblend putty. Do not use linseed oil putty. Ensure floor is even; sand to a flat even surface if required. Final sand should be with 150 mesh screenback, and vacuum thoroughly with a commercial grade vacuum cleaner to remove all sanding dust.
Using Safety Precautions :
Avoid contact with skin and eyes. Avoid breathing dust, fume, gas, mist, vapour or spray. Wear overalls, safety shoes, impervious gloves and safety glasses. Use only in well ventilated areas. Wash hands after use. Keep containers closed when not in use.
Health Effects :
FIRST AID: If poisoning occurs, contact a Doctor or Poisons Information Centre (Phone Australia 131 126; New Zealand 0800 764 766). If medical advice is needed, have product container or label at hand.
SWALLOWED: If swallowed, do NOT induce vomiting. Give a glass of water. Seek medical advice.
EYE: If in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor.
SKIN: If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If irritation occurs seek medical advice.
INHALED: Remove from contaminated area. Seek medical advice.
Fire Suppression :
If material is involved in a fire use water fog (or if unavailable fine water spray), alcohol resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder).
Protective Equipment :
Wear overalls, safety shoes, impervious gloves and safety glasses
Classification Code
Surespec | : |
0671-Painting
|
Speedspec | : |
09910-Painting
09211-Acrylic Texture Render
|
General Specification
Colour | : | Clear |
Storage | : | Keep containers closed when not in use. |
Interior or Exterior | : | interior |
Part A | : | 701W0351 |
Coverage m2/L | : | 8 |
Clean up | : | Water |
Sheen | : | Invisible |
Weather | : | Interior use only |
Size
Sizes | : | 5 L |
Weight | : | 5.37 kg |
Technical
Water | : | Good for splashes and spillage. |
V.O.C. Level | : | 50g/L |
MSDS Number | : | DLXGHSEN003459 |
Heat Resistance | : | Up to 100C. |
Number Of Coats | : | 1-3 |
Flammability | : | Non-flammable |
Gloss Level | : | <5% at both 60 degrees and 85 degrees |
Touch Dry | : | 2 hours |
Abrasion | : | very good |
Fully cured | : | 7 days |
Recoat time (hours) | : | 4 |
Collection
Other Products You Might Like