Product code :
- 771-63001 White/Light Base
- 771-63002 Deep Base
- 771-63003 Clear Base
- 771-38678 N35 Light Grey
- 976-H0160 Standard Hardener
Luxafloor® High Build
Luxafloor high build range of coatings are recommended for high traffic areas where there is likely to be increased wear and tear. Products in this range have excellent durability and chemical resistance due to the high build nature of the coatings.
LUXAFLOOR® PTX is a high performance, high build recoatable polyurethane floor coating designed for ease of use and exceptional flow out. LUXAFLOOR® PTX exhibits excellent gloss and colour retention under extreme UV exposure. LUXAFLOOR® PTX can be used over LUXAFLOOR® LGE as a smooth floor coating, and with LUXAFLOOR® AGGREGATES for slip resistant finishes.
LUXAFLOOR® PTX is available in all the colours on the LUXAFLOOR® Colour Chart and can be matched to most colours in the Dulux® World of Colour range through the COLORFAST™ Tint System.
Benefits
- The same product may be used for interior and exterior areas
- Can be used as a smooth or slip resistant finish
Features :
- Excellent high build brush & roller application
- Superior gloss and colour retention on exterior exposure
- Good chemical and abrasion resistance
- Available in all the colours in the luxafloor® Colour Chart and most colours in the Dulux World of Colour
Gloss Two Pack Polyurethane
• Exterior durable – UV resistant
• Good chemical and abrasion resistance
Uses :
LUXAFLOOR® PTX is ideal for any floor areas that are exposed to the harsh Australian sun.
Surface Preparation :
Specifiers should follow the surface preparation guidelines from the data sheet of the primer used. The first coat must be clean, sound and free from moisture, grease and other contaminants. If application of the second coat has exceeded the recoat window of the first coat (refer to data sheet) then the entire surface MUST be abraded
Application :
Mix each can thoroughly using a power mixer until the contents are uniform. Ensure bases have been tinted to the correct colour before use. DULUX® ASSUMES NO RESPONSIBILITY FOR THE APPLICATION OF INCORRECT COLOUR. Mix the contents of both packs together thoroughly with a power mixer and let stand for 10 minutes. Box all containers before use to ensure colour consistency. Remix thoroughly before application
Product code :
- 771-63001 White/Light Base
- 771-63002 Deep Base
- 771-63003 Clear Base
- 771-38678 N35 Light Grey
- 976-H0160 Standard Hardener
Luxafloor® High Build
Luxafloor high build range of coatings are recommended for high traffic areas where there is likely to be increased wear and tear. Products in this range have excellent durability and chemical resistance due to the high build nature of the coatings.
LUXAFLOOR® PTX is a high performance, high build recoatable polyurethane floor coating designed for ease of use and exceptional flow out. LUXAFLOOR® PTX exhibits excellent gloss and colour retention under extreme UV exposure. LUXAFLOOR® PTX can be used over LUXAFLOOR® LGE as a smooth floor coating, and with LUXAFLOOR® AGGREGATES for slip resistant finishes.
LUXAFLOOR® PTX is available in all the colours on the LUXAFLOOR® Colour Chart and can be matched to most colours in the Dulux® World of Colour range through the COLORFAST™ Tint System.
Benefits
- The same product may be used for interior and exterior areas
- Can be used as a smooth or slip resistant finish
Features :
- Excellent high build brush & roller application
- Superior gloss and colour retention on exterior exposure
- Good chemical and abrasion resistance
- Available in all the colours in the luxafloor® Colour Chart and most colours in the Dulux World of Colour
Gloss Two Pack Polyurethane
• Exterior durable – UV resistant
• Good chemical and abrasion resistance
Uses :
LUXAFLOOR® PTX is ideal for any floor areas that are exposed to the harsh Australian sun.
Surface Preparation :
Specifiers should follow the surface preparation guidelines from the data sheet of the primer used. The first coat must be clean, sound and free from moisture, grease and other contaminants. If application of the second coat has exceeded the recoat window of the first coat (refer to data sheet) then the entire surface MUST be abraded
Application :
Mix each can thoroughly using a power mixer until the contents are uniform. Ensure bases have been tinted to the correct colour before use. DULUX® ASSUMES NO RESPONSIBILITY FOR THE APPLICATION OF INCORRECT COLOUR. Mix the contents of both packs together thoroughly with a power mixer and let stand for 10 minutes. Box all containers before use to ensure colour consistency. Remix thoroughly before application
Product code :
- 771-63001 White/Light Base
- 771-63002 Deep Base
- 771-63003 Clear Base
- 771-38678 N35 Light Grey
- 976-H0160 Standard Hardener
Luxafloor® High Build
Luxafloor high build range of coatings are recommended for high traffic areas where there is likely to be increased wear and tear. Products in this range have excellent durability and chemical resistance due to the high build nature of the coatings.
LUXAFLOOR® PTX is a high performance, high build recoatable polyurethane floor coating designed for ease of use and exceptional flow out. LUXAFLOOR® PTX exhibits excellent gloss and colour retention under extreme UV exposure. LUXAFLOOR® PTX can be used over LUXAFLOOR® LGE as a smooth floor coating, and with LUXAFLOOR® AGGREGATES for slip resistant finishes.
LUXAFLOOR® PTX is available in all the colours on the LUXAFLOOR® Colour Chart and can be matched to most colours in the Dulux® World of Colour range through the COLORFAST™ Tint System.
Benefits
- The same product may be used for interior and exterior areas
- Can be used as a smooth or slip resistant finish
Features :
- Excellent high build brush & roller application
- Superior gloss and colour retention on exterior exposure
- Good chemical and abrasion resistance
- Available in all the colours in the luxafloor® Colour Chart and most colours in the Dulux World of Colour
Gloss Two Pack Polyurethane
• Exterior durable – UV resistant
• Good chemical and abrasion resistance
Uses :
LUXAFLOOR® PTX is ideal for any floor areas that are exposed to the harsh Australian sun.
Surface Preparation :
Specifiers should follow the surface preparation guidelines from the data sheet of the primer used. The first coat must be clean, sound and free from moisture, grease and other contaminants. If application of the second coat has exceeded the recoat window of the first coat (refer to data sheet) then the entire surface MUST be abraded
Application :
Mix each can thoroughly using a power mixer until the contents are uniform. Ensure bases have been tinted to the correct colour before use. DULUX® ASSUMES NO RESPONSIBILITY FOR THE APPLICATION OF INCORRECT COLOUR. Mix the contents of both packs together thoroughly with a power mixer and let stand for 10 minutes. Box all containers before use to ensure colour consistency. Remix thoroughly before application