FireCrunch K-Floor 19 mm Tongue & Groove Flooring
High-strength, carbon-capture (CCS) MgSO₄ composite flooring engineered for passive fire protection.
Non-combustible, BAL-FZ compliant, and certified for structural span loads up to 6.1 kN.
Durable, moisture-resistant, and installation-efficient with no pre-drilling required.
A sustainable, specification-ready alternative to timber- and paper-lined flooring substrates.
K-Floor is a high-density (1.12 g/cm³) tongue and groove flooring system designed for interior, exterior, and decking applications where structural performance and fire resistance are critical. Manufactured from FireCrunch’s low-carbon MgSO₄ composite, it offers a sustainable alternative to traditional sheet flooring—avoiding the use of tree-derived linings while supporting carbon-capture construction outcomes.
Designed with a precision tongue on one long edge and a matching groove on the other, K-Floor provides a stable, interlocking substrate suitable for spans of 5.3 kN over 600 mm joists and 6.1 kN over 450 mm joists.
Independently tested by CSIRO NATA Laboratories, K-Floor exceeds BAL-FZ requirements under AS 1530.8.2—achieving performance levels three times higher than the minimum threshold. Its non-combustible composition also provides resistance to impact, termites, mould, moisture, and bacteria, making it a robust solution for contemporary residential and commercial projects.
Installation is efficient and contractor-friendly: the board cuts cleanly with standard carpentry tools, requires no pre-drilling, and offers a lighter handling weight than comparable cementitious or fibre-cement options. Competitive pricing positions K-Floor as a cost-effective alternative to Secura, Scyon, Boral, and CSR Cemintel flooring products.
At a Glance:
• CSIRO NATA-tested; brick-and-mortar certified
• Structural spans: 5.3 kN @ 600 mm centres; 6.1 kN @ 450 mm centres
• Suitable for interior floors, exterior floors, and decking
• Precision tongue-and-groove edge profile
• Lightweight handling; no pre-drilling required
FireCrunch’s environmental building portfolio delivers products ten times stronger than plasterboard with a lifecycle CO₂ value of only 5%. K-Floor is engineered to withstand Australia’s harsh climatic conditions, offering long-term safety, stability, and sustainability for architecturally driven projects.
For specifications or project enquiries: 1300 933 102 or [email protected].
FireCrunch K-Floor 19 mm Tongue & Groove Flooring
High-strength, carbon-capture (CCS) MgSO₄ composite flooring engineered for passive fire protection.
Non-combustible, BAL-FZ compliant, and certified for structural span loads up to 6.1 kN.
Durable, moisture-resistant, and installation-efficient with no pre-drilling required.
A sustainable, specification-ready alternative to timber- and paper-lined flooring substrates.
K-Floor is a high-density (1.12 g/cm³) tongue and groove flooring system designed for interior, exterior, and decking applications where structural performance and fire resistance are critical. Manufactured from FireCrunch’s low-carbon MgSO₄ composite, it offers a sustainable alternative to traditional sheet flooring—avoiding the use of tree-derived linings while supporting carbon-capture construction outcomes.
Designed with a precision tongue on one long edge and a matching groove on the other, K-Floor provides a stable, interlocking substrate suitable for spans of 5.3 kN over 600 mm joists and 6.1 kN over 450 mm joists.
Independently tested by CSIRO NATA Laboratories, K-Floor exceeds BAL-FZ requirements under AS 1530.8.2—achieving performance levels three times higher than the minimum threshold. Its non-combustible composition also provides resistance to impact, termites, mould, moisture, and bacteria, making it a robust solution for contemporary residential and commercial projects.
Installation is efficient and contractor-friendly: the board cuts cleanly with standard carpentry tools, requires no pre-drilling, and offers a lighter handling weight than comparable cementitious or fibre-cement options. Competitive pricing positions K-Floor as a cost-effective alternative to Secura, Scyon, Boral, and CSR Cemintel flooring products.
At a Glance:
• CSIRO NATA-tested; brick-and-mortar certified
• Structural spans: 5.3 kN @ 600 mm centres; 6.1 kN @ 450 mm centres
• Suitable for interior floors, exterior floors, and decking
• Precision tongue-and-groove edge profile
• Lightweight handling; no pre-drilling required
FireCrunch’s environmental building portfolio delivers products ten times stronger than plasterboard with a lifecycle CO₂ value of only 5%. K-Floor is engineered to withstand Australia’s harsh climatic conditions, offering long-term safety, stability, and sustainability for architecturally driven projects.
For specifications or project enquiries: 1300 933 102 or [email protected].
FireCrunch K-Floor 19 mm Tongue & Groove Flooring
High-strength, carbon-capture (CCS) MgSO₄ composite flooring engineered for passive fire protection.
Non-combustible, BAL-FZ compliant, and certified for structural span loads up to 6.1 kN.
Durable, moisture-resistant, and installation-efficient with no pre-drilling required.
A sustainable, specification-ready alternative to timber- and paper-lined flooring substrates.
K-Floor is a high-density (1.12 g/cm³) tongue and groove flooring system designed for interior, exterior, and decking applications where structural performance and fire resistance are critical. Manufactured from FireCrunch’s low-carbon MgSO₄ composite, it offers a sustainable alternative to traditional sheet flooring—avoiding the use of tree-derived linings while supporting carbon-capture construction outcomes.
Designed with a precision tongue on one long edge and a matching groove on the other, K-Floor provides a stable, interlocking substrate suitable for spans of 5.3 kN over 600 mm joists and 6.1 kN over 450 mm joists.
Independently tested by CSIRO NATA Laboratories, K-Floor exceeds BAL-FZ requirements under AS 1530.8.2—achieving performance levels three times higher than the minimum threshold. Its non-combustible composition also provides resistance to impact, termites, mould, moisture, and bacteria, making it a robust solution for contemporary residential and commercial projects.
Installation is efficient and contractor-friendly: the board cuts cleanly with standard carpentry tools, requires no pre-drilling, and offers a lighter handling weight than comparable cementitious or fibre-cement options. Competitive pricing positions K-Floor as a cost-effective alternative to Secura, Scyon, Boral, and CSR Cemintel flooring products.
At a Glance:
• CSIRO NATA-tested; brick-and-mortar certified
• Structural spans: 5.3 kN @ 600 mm centres; 6.1 kN @ 450 mm centres
• Suitable for interior floors, exterior floors, and decking
• Precision tongue-and-groove edge profile
• Lightweight handling; no pre-drilling required
FireCrunch’s environmental building portfolio delivers products ten times stronger than plasterboard with a lifecycle CO₂ value of only 5%. K-Floor is engineered to withstand Australia’s harsh climatic conditions, offering long-term safety, stability, and sustainability for architecturally driven projects.
For specifications or project enquiries: 1300 933 102 or
[email protected].
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
