Available in two configurations, these retrofit floor waste kits are designed to effortlessly and effectively restore fire protection in areas with non-rated, incorrect, or damaged cast-in fire collars. Tested to AS1530.4 and assessed to AS4072.1 standards, they deliver an impressive FRL of up to -/180/180, offering a low-profile, high-performance solution for safety restoration. With the latest generation of intumescent technology, FIREFLY T1 and T2, expand with greater speed and force than standard collars, eliminating the need for contraptions such as springs or blades. In testing, the furnace gases hitting the grate are minimised, and the grate temperature measurement remains well below the threshold of ∆180 K. In addition, FIREFLY T1 and T2 were tested in the more onerous configuration of open slot steel grate and are compliant when installed on site using either an open slot steel grate or a closed grate.
Each kit includes a floorwaste collar and a floorwaste adaptor plate.
Configurations
T1 – Suitable for DN100 uPVC pipes (OD up to 115 mm, wall thickness up to 4.5 mm)
T2 – Suitable for DN50 uPVC pipes (OD up to 60 mm, wall thickness up to 3 mm).
Dimensions
50 mm pipe collar – only 27 mm high
100 mm pipe collar – only 38 mm high
Available in two configurations, these retrofit floor waste kits are designed to effortlessly and effectively restore fire protection in areas with non-rated, incorrect, or damaged cast-in fire collars. Tested to AS1530.4 and assessed to AS4072.1 standards, they deliver an impressive FRL of up to -/180/180, offering a low-profile, high-performance solution for safety restoration. With the latest generation of intumescent technology, FIREFLY T1 and T2, expand with greater speed and force than standard collars, eliminating the need for contraptions such as springs or blades. In testing, the furnace gases hitting the grate are minimised, and the grate temperature measurement remains well below the threshold of ∆180 K. In addition, FIREFLY T1 and T2 were tested in the more onerous configuration of open slot steel grate and are compliant when installed on site using either an open slot steel grate or a closed grate.
Each kit includes a floorwaste collar and a floorwaste adaptor plate.
Configurations
T1 – Suitable for DN100 uPVC pipes (OD up to 115 mm, wall thickness up to 4.5 mm)
T2 – Suitable for DN50 uPVC pipes (OD up to 60 mm, wall thickness up to 3 mm).
Dimensions
50 mm pipe collar – only 27 mm high
100 mm pipe collar – only 38 mm high
Available in two configurations, these retrofit floor waste kits are designed to effortlessly and effectively restore fire protection in areas with non-rated, incorrect, or damaged cast-in fire collars. Tested to AS1530.4 and assessed to AS4072.1 standards, they deliver an impressive FRL of up to -/180/180, offering a low-profile, high-performance solution for safety restoration. With the latest generation of intumescent technology, FIREFLY T1 and T2, expand with greater speed and force than standard collars, eliminating the need for contraptions such as springs or blades. In testing, the furnace gases hitting the grate are minimised, and the grate temperature measurement remains well below the threshold of ∆180 K. In addition, FIREFLY T1 and T2 were tested in the more onerous configuration of open slot steel grate and are compliant when installed on site using either an open slot steel grate or a closed grate.
Each kit includes a floorwaste collar and a floorwaste adaptor plate.
Configurations
T1 – Suitable for DN100 uPVC pipes (OD up to 115 mm, wall thickness up to 4.5 mm)
T2 – Suitable for DN50 uPVC pipes (OD up to 60 mm, wall thickness up to 3 mm).
Dimensions
50 mm pipe collar – only 27 mm high
100 mm pipe collar – only 38 mm high
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
New Zealand 
New Zealand 
