Renderoc HB40 Plus is an extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R3, compatible with concrete 25 - 50 MPa. For the reinstatement of concrete where low permeability and high resistivity characteristics are key requirements.
CODE: FC300746-20KG
Typical Applications:
- Vertical & overhead patch repairs
- Localised trowel or wet spray application, up to 1m2 repair area
- Trowel build depth between 10-40mm required, and required strength is between 25-50 Mpa. Higher build & improved application compared to HB40
Advantages:
- Compatible with concrete strength in the range 25 to 50 MPa
- High strength - suitable for structural repairs
- Abrasion resistant - suitable for aggressive environments
- Shrinkage compensated - provides long term dimensional stability
- Low permeability to potentially damaging water, CO2 and chloride ions
- High build formulation - fewer applications of product
- High resistivity - provides increased durability
- Excellent bond to SSD concrete substrates – no separate primer required in most circumstances - refer to Substrate Priming section
- Can be applied using wet-spray process - providing
faster high build repairs
- Pre-bagged to overcome site-batched variations - only
the site addition of clean water required
- Sustainable product with lower carbon foot print - formulation based on supplementary cementitious materials
- Complies to EN 1504-3 Class R3
Renderoc HB40 Plus is an extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R3, compatible with concrete 25 - 50 MPa. For the reinstatement of concrete where low permeability and high resistivity characteristics are key requirements.
CODE: FC300746-20KG
Typical Applications:
- Vertical & overhead patch repairs
- Localised trowel or wet spray application, up to 1m2 repair area
- Trowel build depth between 10-40mm required, and required strength is between 25-50 Mpa. Higher build & improved application compared to HB40
Advantages:
- Compatible with concrete strength in the range 25 to 50 MPa
- High strength - suitable for structural repairs
- Abrasion resistant - suitable for aggressive environments
- Shrinkage compensated - provides long term dimensional stability
- Low permeability to potentially damaging water, CO2 and chloride ions
- High build formulation - fewer applications of product
- High resistivity - provides increased durability
- Excellent bond to SSD concrete substrates – no separate primer required in most circumstances - refer to Substrate Priming section
- Can be applied using wet-spray process - providing
faster high build repairs
- Pre-bagged to overcome site-batched variations - only
the site addition of clean water required
- Sustainable product with lower carbon foot print - formulation based on supplementary cementitious materials
- Complies to EN 1504-3 Class R3
Renderoc HB40 Plus is an extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R3, compatible with concrete 25 - 50 MPa. For the reinstatement of concrete where low permeability and high resistivity characteristics are key requirements.
CODE: FC300746-20KG
Typical Applications:
- Vertical & overhead patch repairs
- Localised trowel or wet spray application, up to 1m2 repair area
- Trowel build depth between 10-40mm required, and required strength is between 25-50 Mpa. Higher build & improved application compared to HB40
Advantages:
- Compatible with concrete strength in the range 25 to 50 MPa
- High strength - suitable for structural repairs
- Abrasion resistant - suitable for aggressive environments
- Shrinkage compensated - provides long term dimensional stability
- Low permeability to potentially damaging water, CO2 and chloride ions
- High build formulation - fewer applications of product
- High resistivity - provides increased durability
- Excellent bond to SSD concrete substrates – no separate primer required in most circumstances - refer to Substrate Priming section
- Can be applied using wet-spray process - providing
faster high build repairs
- Pre-bagged to overcome site-batched variations - only
the site addition of clean water required
- Sustainable product with lower carbon foot print - formulation based on supplementary cementitious materials
- Complies to EN 1504-3 Class R3