- Australia
Nitoflor FC150HP
Solvent free, high build epoxy floor coating. Highly resistant to chemical attack and the action of forklift/commercial type traffic. Nitoflor FC150 HP is non-taint during and after application, and produces a satin finish. Nitoflor Anti-Slip Grains 01 or 02 can be added to achieve defined slip resistance ratings. Refer to TDS for further information. A range of colour finishes can be achieved with Nitoflor FC150 HP by using the product in combination with Nitoflor Colour Pots. Nitoflor FC150 HP is also available in pre-tinted kits in Koala Grey colour and can be made to order (MTO) in special colours, subject to a minimum order quantity of 23 kits with a lead time of 14 to 21 days. NOTE: this new formulation is NOT compatible with the previous base & hardener formulation. CODE: FC605119-5.2L FC605118-2.6L Typical Applications: - Food and chemical industries - Hospitals - Schools - Kitchens - High traffic applications Advantages: - Long lasting and easily maintained - Good resistance to many industrial chemicals - Highly resistant to the action of forklift vehicles and commercial type traffic - Slip resistance improves safety for plant and personnel - Provides an attractive satin finish - Can be used on horizontal and vertical surfaces, up to 1m from the floor level - Available in a wide range of colours including 11 Australian standard colours - Complies with BCA for building material fire hazard properties specification C1.10a for critical radiant flux and smoke development rate values
Solvent free, high build epoxy floor coating. Highly resistant to chemical attack and the action of forklift/commercial type traffic. Nitoflor FC150 HP is non-taint during and after application, and produces a satin finish. Nitoflor Anti-Slip Grains 01 or 02 can be added to achieve defined slip resistance ratings. Refer to TDS for further information. A range of colour finishes can be achieved with Nitoflor FC150 HP by using the product in combination with Nitoflor Colour Pots. Nitoflor FC150 HP is also available in pre-tinted kits in Koala Grey colour and can be made to order (MTO) in special colours, subject to a minimum order quantity of 23 kits with a lead time of 14 to 21 days. NOTE: this new formulation is NOT compatible with the previous base & hardener formulation. CODE: FC605119-5.2L FC605118-2.6L Typical Applications: - Food and chemical industries - Hospitals - Schools - Kitchens - High traffic applications Advantages: - Long lasting and easily maintained - Good resistance to many industrial chemicals - Highly resistant to the action of forklift vehicles and commercial type traffic - Slip resistance improves safety for plant and personnel - Provides an attractive satin finish - Can be used on horizontal and vertical surfaces, up to 1m from the floor level - Available in a wide range of colours including 11 Australian standard colours - Complies with BCA for building material fire hazard properties specification C1.10a for critical radiant flux and smoke development rate values
Solvent free, high build epoxy floor coating. Highly resistant to chemical attack and the action of forklift/commercial type traffic. Nitoflor FC150 HP is non-taint during and after application, and produces a satin finish.
Nitoflor Anti-Slip Grains 01 or 02 can be added to achieve defined slip resistance ratings. Refer to TDS for further information.
A range of colour finishes can be achieved with Nitoflor FC150 HP by using the product in combination with Nitoflor Colour Pots.
Nitoflor FC150 HP is also available in pre-tinted kits in Koala Grey colour and can be made to order (MTO) in special colours, subject to a minimum order quantity of 23 kits with a lead time of 14 to 21 days.
NOTE: this new formulation is NOT compatible with the previous base & hardener formulation.
CODE:
FC605119-5.2L
FC605118-2.6L
Typical Applications:
- Food and chemical industries
- Hospitals
- Schools
- Kitchens
- High traffic applications
Advantages:
- Long lasting and easily maintained
- Good resistance to many industrial chemicals
- Highly resistant to the action of forklift vehicles and commercial type traffic
- Slip resistance improves safety for plant and personnel
- Provides an attractive satin finish
- Can be used on horizontal and vertical surfaces, up to 1m from the floor level
- Available in a wide range of colours including 11 Australian standard colours
- Complies with BCA for building material fire hazard properties specification C1.10a for critical radiant flux and smoke development rate values
Nitoflor Anti-Slip Grains 01 or 02 can be added to achieve defined slip resistance ratings. Refer to TDS for further information.
A range of colour finishes can be achieved with Nitoflor FC150 HP by using the product in combination with Nitoflor Colour Pots.
Nitoflor FC150 HP is also available in pre-tinted kits in Koala Grey colour and can be made to order (MTO) in special colours, subject to a minimum order quantity of 23 kits with a lead time of 14 to 21 days.
NOTE: this new formulation is NOT compatible with the previous base & hardener formulation.
CODE:
FC605119-5.2L
FC605118-2.6L
Typical Applications:
- Food and chemical industries
- Hospitals
- Schools
- Kitchens
- High traffic applications
Advantages:
- Long lasting and easily maintained
- Good resistance to many industrial chemicals
- Highly resistant to the action of forklift vehicles and commercial type traffic
- Slip resistance improves safety for plant and personnel
- Provides an attractive satin finish
- Can be used on horizontal and vertical surfaces, up to 1m from the floor level
- Available in a wide range of colours including 11 Australian standard colours
- Complies with BCA for building material fire hazard properties specification C1.10a for critical radiant flux and smoke development rate values
General Specification
Application | : | Food and chemical industries | Hospitals | Schools | Kitchens | High traffic applications |
Size
Volume | : | 5.2 L | 2.6 L |
Technical
Abrasion resistance | : | Medium |
Chemical resistance | : | Medium - High |
Foot traffic @ 20°C | : | 24 hours |
Full cure @ 20°C | : | 7 days |
Physical or chemical change | : | 17 g/l |
Service temperature range | : | 55°C |
Vehicle traffic @ 20°C | : | 72 hours |
Other Products You Might Like
Other Products You Might Like