-
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
Classification Code
| Surespec | : |
0621-Waterproofing- wet areas
0672-Textured & membrane coatings
|
| Speedspec | : |
07130-Tanking & waterproofing
09910-Painting
|
General Specification
| Application | : | Exposed roofing applications (combined with TUFFCOTE™ Grey top coat for foot-traffic and longevity), Podium slabs, Gutters, Balconies, Internal wet areas, Non-chlorinated ponds and water features |
| Application area | : | Exposed roofing applications |
| Colour | : | Grey |
| Composition | : | Water based polymer |
| Type | : | Waterproof Membrane |
| Warranty | : | GCP and contractors recognised by GCP as experienced in the application of GCP products will provide product warranties for individual projects. Product warranty periods offered are dependent on project details and complexity |
Size
| EPOCOTE™ F100W Clear | : | 20 litre and 4 litre sets |
| NEWFLEX™ Grey | : | 18.75kg (packed in 15-litre pails) |
| NEWFLEX™ Primer S | : | 18kg (packed in 20-litre pails) |
Technical
| Clean-up | : | Remove uncured product with water. Solvent may assist with the removal of cured product. Exercise care when using solvents. Review Material Safety Data Sheet (MSDS) before use |
| Density | : | 1.3 g/m3 at 20°C |
| Elongation (AS1145) | : | >320% Class III |
| Health and Safety | : | In case of spills and accidents, refer to the MSDS of the products or when in doubt contact your local GCP representative. Always wear protective clothing, gloves and protective goggles when handling chemical products |
| Limitations | : | Information contained in this document does not cover all possible application scenarios or imply product suitability for an application |
| Service Temperature | : | -10°C to +80°C |
| Shelf Life | : | Unopened pails of NEWFLEX™ Grey stored in a dry, cool place have a shelf life of 12 months |
| Tensile Strength (AS1145) | : | >1.4 MPa |
