- Australia
Interchar 1120: 120 Minute Water-Based Intumescent Passive Fire Protection (PFP) for On-Site Application / Decorative Steelwork Up to C2 - Internal (as per AS/NZS 2312.1: 2014)
Enhanced
$$ Standard
Indonesia
Surespec | : |
0346-Structural fire protection systems
0672-Textured & membrane coatings
|
Speedspec | : |
07810-Fireproofing
09910-Painting
09211-Acrylic Texture Render
|
1st Coat | : | Intergard 251HS |
2nd Coat | : | Interchar 1120 |
3rd Coat | : | Interthane 870 |
Pre-Treatment - Cleaning | : | All surfaces should be assessed and treated as per ISO 8504:2000 | Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning | Surface salts concentration (e.g. chloride deposits) shall be less than 10 µg/cm2 prior to painting |
Pre-Treatment - Fabrication | : | All surfaces shall be finished as per ISO 8501-3 Table 1 | Grade P2 with all edges rounded to minimum 2 mm radius |
Substrate | : | Steel |
Surface Preparation | : | Abrasive blast clean to Sa2.5 (ISO 8501-1:2007) or SSPC-SP6 | A sharp, angular surface profile of 50-75 microns (2-3 mils) is recommended |
Nominated Dry Film Thickness Per Coat (Microns) | : | 1st Coat: 75 µm / 2nd Coat: Please consult International Protective Coatings / 3rd Coat: 75 µm |
Total System Dry Film Thickness (Microns) | : | Final system dry film thickness is dependent on steel section details | Please consult International Protective Coatings |
AS/NZS 2312.1: 2014 Environmental Classification | : | Up to C2 (Internal Only) |
Certification | : | Assessed in accordance with AS 1530.4 and AS4100 |
Colour Availability | : | Available in a wide range of colours via International Chromascan Tinting System (including AS 2700, RAL, BS and custom colours) |
Exposure | : | Interchar 1120 (whether sealed or not) should be protected from pooling or running water. Interchar 1120 is not designed for frequent water immersion/soaking. |
Fire Resistance Level (FRL) | : | 120 / - / - |
NATSPEC National Classification System | : | 0346 Structural fire protection systems |
SpecPack | : | 09910 Painting |
SpeedSpec | : | 09910 Painting |
Warranty | : | Refer to International Protective Coatings for further details relating to performance warranty |