- Australia
Series 70 Heavy Duty Roller Grille
Australia
CURTAIN - Steel / High Cycle Steel – 19mm x 1.2mm diameter galvabond steel tubes connected by 40mm x 2.5mm zinc plated blue mild steel links. The ends of every tube shall have a nylon sleeve to minimise noise. - Aluminium – 19mm x 2.0mm diameter aluminium tubes connected by 40mm x 2.5mm aluminium links. The links are riveted to the tubes at nominal staggered 500mm centres. The ends of every tube have a nylon sleeve to minimise noise. - The free air flow derived from both curtain types is 63%. DRUM The drum shall be manufactured from steel tube. Helical coil oil tempered springs will be fitted to an axle inside the drum tube. Drum deflection shall not exceed 1/360th of the drum span. GUIDES Side guides shall be 86mm x 40mm extruded aluminium sections. BRACKETS The standard brackets are fabricated from mild steel and supplied in a prime painted finish. BOTTOM RAIL Formed from extruded aluminium, and is designed to accept a weatherseal if required. An optional steel box section bottom rail is available upon request. OPERATION (SELECT FROM) - Manual by hand (up to 6m2 overall size – a pull hook is provided for high shutters); - Chain operation (for grilles 6.01m2 – 25.0m2 overall size); - Electric operation (low cycle applications) 1 h.p. motor / gearbox c/- limit switches and reversing contactor; - Electric operation (high cycle applications up to 50 operations per day) 1 h.p. 3 phase fan cooled motor / gearbox c/- logic control box and photo electric beam protection (supply, install & interfacing of access control systems are by others). LOCKING Shoot bolts fitted internal or external (shoot bolts are not recommended for motorised grilles). FINISH OPTIONS (SELECT FROM) - Steel – galvabond; - Aluminium – Matt natural anodised aluminium; - Powdercoat finishes are not available with this product, due to excessive paint rub caused by the curtains’ rolling action. SPECIAL NOTES The power supply required for the motor is either: - 3 phase 415v with neutral (10 amp), located within one metre of the motor; - Single phase hard wired (10 amp), located within one metre of the motor. Work by others: - Power supply provision as outlined above; - Structurally adequate wall / mounting points to support the roller shutter; - Adequate headroom & sideroom as per Tech. Data sheets to ensure successful operation (note that Series 3 roller shutters cannot be side mounted); - Product warranty – 12 months.
CURTAIN - Steel / High Cycle Steel – 19mm x 1.2mm diameter galvabond steel tubes connected by 40mm x 2.5mm zinc plated blue mild steel links. The ends of every tube shall have a nylon sleeve to minimise noise. - Aluminium – 19mm x 2.0mm diameter aluminium tubes connected by 40mm x 2.5mm aluminium links. The links are riveted to the tubes at nominal staggered 500mm centres. The ends of every tube have a nylon sleeve to minimise noise. - The free air flow derived from both curtain types is 63%. DRUM The drum shall be manufactured from steel tube. Helical coil oil tempered springs will be fitted to an axle inside the drum tube. Drum deflection shall not exceed 1/360th of the drum span. GUIDES Side guides shall be 86mm x 40mm extruded aluminium sections. BRACKETS The standard brackets are fabricated from mild steel and supplied in a prime painted finish. BOTTOM RAIL Formed from extruded aluminium, and is designed to accept a weatherseal if required. An optional steel box section bottom rail is available upon request. OPERATION (SELECT FROM) - Manual by hand (up to 6m2 overall size – a pull hook is provided for high shutters); - Chain operation (for grilles 6.01m2 – 25.0m2 overall size); - Electric operation (low cycle applications) 1 h.p. motor / gearbox c/- limit switches and reversing contactor; - Electric operation (high cycle applications up to 50 operations per day) 1 h.p. 3 phase fan cooled motor / gearbox c/- logic control box and photo electric beam protection (supply, install & interfacing of access control systems are by others). LOCKING Shoot bolts fitted internal or external (shoot bolts are not recommended for motorised grilles). FINISH OPTIONS (SELECT FROM) - Steel – galvabond; - Aluminium – Matt natural anodised aluminium; - Powdercoat finishes are not available with this product, due to excessive paint rub caused by the curtains’ rolling action. SPECIAL NOTES The power supply required for the motor is either: - 3 phase 415v with neutral (10 amp), located within one metre of the motor; - Single phase hard wired (10 amp), located within one metre of the motor. Work by others: - Power supply provision as outlined above; - Structurally adequate wall / mounting points to support the roller shutter; - Adequate headroom & sideroom as per Tech. Data sheets to ensure successful operation (note that Series 3 roller shutters cannot be side mounted); - Product warranty – 12 months.
CURTAIN
- Steel / High Cycle Steel – 19mm x 1.2mm diameter galvabond steel tubes connected by 40mm x 2.5mm zinc plated blue mild steel links. The ends of every tube shall have a nylon sleeve to minimise noise.
- Aluminium – 19mm x 2.0mm diameter aluminium tubes connected by 40mm x 2.5mm aluminium links. The links are riveted to the tubes at nominal staggered 500mm centres. The ends of every tube have a nylon sleeve to minimise noise.
- The free air flow derived from both curtain types is 63%.
DRUM
The drum shall be manufactured from steel tube. Helical coil oil tempered springs will be fitted to an axle inside the drum tube. Drum deflection shall not exceed 1/360th of the drum span.
GUIDES
Side guides shall be 86mm x 40mm extruded aluminium sections.
BRACKETS
The standard brackets are fabricated from mild steel and supplied in a prime painted finish.
BOTTOM RAIL
Formed from extruded aluminium, and is designed to accept a weatherseal if required. An optional steel box section bottom rail is available upon request.
OPERATION (SELECT FROM)
- Manual by hand (up to 6m2 overall size – a pull hook is provided for high shutters);
- Chain operation (for grilles 6.01m2 – 25.0m2 overall size);
- Electric operation (low cycle applications) 1 h.p. motor / gearbox c/- limit switches and reversing contactor;
- Electric operation (high cycle applications up to 50 operations per day) 1 h.p. 3 phase fan cooled motor / gearbox c/- logic control box and photo electric beam protection (supply, install & interfacing of access control systems are by others).
LOCKING
Shoot bolts fitted internal or external (shoot bolts are not recommended for motorised grilles).
FINISH OPTIONS (SELECT FROM)
- Steel – galvabond;
- Aluminium – Matt natural anodised aluminium;
- Powdercoat finishes are not available with this product, due to excessive paint rub caused by the curtains’ rolling action.
SPECIAL NOTES
The power supply required for the motor is either:
- 3 phase 415v with neutral (10 amp), located within one metre of the motor;
- Single phase hard wired (10 amp), located within one metre of the motor.
Work by others:
- Power supply provision as outlined above;
- Structurally adequate wall / mounting points to support the roller shutter;
- Adequate headroom & sideroom as per Tech. Data sheets to ensure successful operation (note that Series 3 roller shutters cannot be side mounted);
- Product warranty – 12 months.
- Steel / High Cycle Steel – 19mm x 1.2mm diameter galvabond steel tubes connected by 40mm x 2.5mm zinc plated blue mild steel links. The ends of every tube shall have a nylon sleeve to minimise noise.
- Aluminium – 19mm x 2.0mm diameter aluminium tubes connected by 40mm x 2.5mm aluminium links. The links are riveted to the tubes at nominal staggered 500mm centres. The ends of every tube have a nylon sleeve to minimise noise.
- The free air flow derived from both curtain types is 63%.
DRUM
The drum shall be manufactured from steel tube. Helical coil oil tempered springs will be fitted to an axle inside the drum tube. Drum deflection shall not exceed 1/360th of the drum span.
GUIDES
Side guides shall be 86mm x 40mm extruded aluminium sections.
BRACKETS
The standard brackets are fabricated from mild steel and supplied in a prime painted finish.
BOTTOM RAIL
Formed from extruded aluminium, and is designed to accept a weatherseal if required. An optional steel box section bottom rail is available upon request.
OPERATION (SELECT FROM)
- Manual by hand (up to 6m2 overall size – a pull hook is provided for high shutters);
- Chain operation (for grilles 6.01m2 – 25.0m2 overall size);
- Electric operation (low cycle applications) 1 h.p. motor / gearbox c/- limit switches and reversing contactor;
- Electric operation (high cycle applications up to 50 operations per day) 1 h.p. 3 phase fan cooled motor / gearbox c/- logic control box and photo electric beam protection (supply, install & interfacing of access control systems are by others).
LOCKING
Shoot bolts fitted internal or external (shoot bolts are not recommended for motorised grilles).
FINISH OPTIONS (SELECT FROM)
- Steel – galvabond;
- Aluminium – Matt natural anodised aluminium;
- Powdercoat finishes are not available with this product, due to excessive paint rub caused by the curtains’ rolling action.
SPECIAL NOTES
The power supply required for the motor is either:
- 3 phase 415v with neutral (10 amp), located within one metre of the motor;
- Single phase hard wired (10 amp), located within one metre of the motor.
Work by others:
- Power supply provision as outlined above;
- Structurally adequate wall / mounting points to support the roller shutter;
- Adequate headroom & sideroom as per Tech. Data sheets to ensure successful operation (note that Series 3 roller shutters cannot be side mounted);
- Product warranty – 12 months.
Classification Code
Surespec | : |
0454-Overhead Doors
|
Speedspec | : |
08330-Roller shutter doors
|
General Specification
Warranty | : | 1 years |
Colour | : | Silver |
Type of door | : | Roller grille |
Product type | : | Roller grille |
Applications | : | Large shop fronts | Arcade entrances where coverage of wide openings and optimal ventilation is required |
Finish | : | Steel – Galvabond | Aluminium – Matt natural anodised aluminium |
Manufactured by | : | Mirage Doors |
Size
Width | : | 8000 mm |
Height | : | 4500 mm |
Guides | : | 86 mm x 40 mm |
Curtain | : | Steel / High Cycle Steel : 19mm x 1.2mm | Aluminium: 19mm x 2.0mm |
Technical
Manual release cord | : | Yes |
Operation | : | Manual by hand | Chain operation | Electric operation |
Manual chain | : | Mandatory inclusion with motor |
Locking | : | Shoot bolts fitted internal or external |
Weatherseal | : | Yes |
Power supply | : | Single phase | 3 phase |
Free air flow | : | 63% |
Collection
Other Products You Might Like