Five Rib is a strong, high tensile profile that is perfect for many different applications for domestic and commercial usage. Commonly used for low pitched roofs or long spans on commercial buildings as it has great weather resistance. It is made to last and is well known in the roofing industry for its versatility and reliability. It is tough, cost-effective and superb for design purposes.
Five Rib is available in an unequalled range of colours and finishes including UniZinc®, UniCote®, Colorbond®, MagnaFlow™ and the luxurious UniCote® LUX range.
Features and Benefits:
• 762mm cover and 27mm rib height
• Available in 0.42BMT and 0.48BMT
• Hi-tensile steel – strong and lightweight
• 2º minimum pitch
• Cut to length
• Versatility – suitable for commercial/industrial and residential roofing and wall cladding
Installation Information:
• Rollsec Five Rib sheeting should be installed into the prevailing weather
• Each sheet should be laid accurately to cleanly lap the adjoining roof sheet without over or under lapping
• Where sheeting spans exceed 900mm for roofing and 1200mm for walling, install a side lap fastener mid-span
• For roofing, the pan needs to be turned up at the peak and turned down at the eave
• At the completion of each days work, the roof surface needs to be cleaned to remove all traces of metal debris and swarf. Typically this is achieved by air blower, hose down or sweeping.
• Good trade practise should be applied, such as that contained in SA HB39:2015
Five Rib is a strong, high tensile profile that is perfect for many different applications for domestic and commercial usage. Commonly used for low pitched roofs or long spans on commercial buildings as it has great weather resistance. It is made to last and is well known in the roofing industry for its versatility and reliability. It is tough, cost-effective and superb for design purposes.
Five Rib is available in an unequalled range of colours and finishes including UniZinc®, UniCote®, Colorbond®, MagnaFlow™ and the luxurious UniCote® LUX range.
Features and Benefits:
• 762mm cover and 27mm rib height
• Available in 0.42BMT and 0.48BMT
• Hi-tensile steel – strong and lightweight
• 2º minimum pitch
• Cut to length
• Versatility – suitable for commercial/industrial and residential roofing and wall cladding
Installation Information:
• Rollsec Five Rib sheeting should be installed into the prevailing weather
• Each sheet should be laid accurately to cleanly lap the adjoining roof sheet without over or under lapping
• Where sheeting spans exceed 900mm for roofing and 1200mm for walling, install a side lap fastener mid-span
• For roofing, the pan needs to be turned up at the peak and turned down at the eave
• At the completion of each days work, the roof surface needs to be cleaned to remove all traces of metal debris and swarf. Typically this is achieved by air blower, hose down or sweeping.
• Good trade practise should be applied, such as that contained in SA HB39:2015
Five Rib is a strong, high tensile profile that is perfect for many different applications for domestic and commercial usage. Commonly used for low pitched roofs or long spans on commercial buildings as it has great weather resistance. It is made to last and is well known in the roofing industry for its versatility and reliability. It is tough, cost-effective and superb for design purposes.
Five Rib is available in an unequalled range of colours and finishes including UniZinc®, UniCote®, Colorbond®, MagnaFlow™ and the luxurious UniCote® LUX range.
Features and Benefits:
• 762mm cover and 27mm rib height
• Available in 0.42BMT and 0.48BMT
• Hi-tensile steel – strong and lightweight
• 2º minimum pitch
• Cut to length
• Versatility – suitable for commercial/industrial and residential roofing and wall cladding
Installation Information:
• Rollsec Five Rib sheeting should be installed into the prevailing weather
• Each sheet should be laid accurately to cleanly lap the adjoining roof sheet without over or under lapping
• Where sheeting spans exceed 900mm for roofing and 1200mm for walling, install a side lap fastener mid-span
• For roofing, the pan needs to be turned up at the peak and turned down at the eave
• At the completion of each days work, the roof surface needs to be cleaned to remove all traces of metal debris and swarf. Typically this is achieved by air blower, hose down or sweeping.
• Good trade practise should be applied, such as that contained in SA HB39:2015