Stone+ is an exclusive porcelain material ideal for the finishes of kitchen units. Hard, coloured, non- porous, body provides hygienic surface, perfectly suitable for contact with foods.
Stone+ made from a careful selection of the purest raw materials, which are then blended and compacted, following by firing in kiln at temperature over 1200 degrees. Stone+ is suitable for both indoor and outdoor.
The Stone+ surface is so tough that foods can be sliced out without damaging it. However, for correct use, to maintain all the material's original beauty, chopping-board should always be used.Cer T knives almost as hard as the worktop itself, so they must not be not used to cut directly on the surface. It is also important not to clean Stone+ surfaces with material as hard as or harder than the Stone+ itself.
Features :
> Impact Resistance
> Bending Strength
> Resistant to frost and low temperature
> Resistant to heat
> Resistance to UV radiation
> Hard-wearing and hygienic
> Easier cleaning and care
Stone+ is an exclusive porcelain material ideal for the finishes of kitchen units. Hard, coloured, non- porous, body provides hygienic surface, perfectly suitable for contact with foods.
Stone+ made from a careful selection of the purest raw materials, which are then blended and compacted, following by firing in kiln at temperature over 1200 degrees. Stone+ is suitable for both indoor and outdoor.
The Stone+ surface is so tough that foods can be sliced out without damaging it. However, for correct use, to maintain all the material's original beauty, chopping-board should always be used.Cer T knives almost as hard as the worktop itself, so they must not be not used to cut directly on the surface. It is also important not to clean Stone+ surfaces with material as hard as or harder than the Stone+ itself.
Features :
> Impact Resistance
> Bending Strength
> Resistant to frost and low temperature
> Resistant to heat
> Resistance to UV radiation
> Hard-wearing and hygienic
> Easier cleaning and care
Stone+ is an exclusive porcelain material ideal for the finishes of kitchen units. Hard, coloured, non- porous, body provides hygienic surface, perfectly suitable for contact with foods.
Stone+ made from a careful selection of the purest raw materials, which are then blended and compacted, following by firing in kiln at temperature over 1200 degrees. Stone+ is suitable for both indoor and outdoor.
The Stone+ surface is so tough that foods can be sliced out without damaging it. However, for correct use, to maintain all the material's original beauty, chopping-board should always be used.Cer T knives almost as hard as the worktop itself, so they must not be not used to cut directly on the surface. It is also important not to clean Stone+ surfaces with material as hard as or harder than the Stone+ itself.
Features :
> Impact Resistance
> Bending Strength
> Resistant to frost and low temperature
> Resistant to heat
> Resistance to UV radiation
> Hard-wearing and hygienic
> Easier cleaning and care
Hong Kong SAR
Australia
Indonesia
Malaysia
New Zealand
Philippines
Singapore
