- Hong Kong SAR
Electric Vehicle 24kW DC Quick Charger EVQ-IES24MC
Lighting | : | High visibility | LED status indication |
Mounting method | : | Wall-mounted |
Colour | : | Grey |
Recommended over current protection to be fitted to the unit supply | : | Protected by internal or external 40A MCB Curve C or D |
Recommended earth leakage protection to be fitted to the unit supply | : | Protected by internal or external RCCB with Type A characteristic and residual operating current not exceeding 30mA |
Display | : | 7 inch touch screen display | Support English and Traditional Chinese |
Built-in protection | : | Overload | output short-circuit | over-temperature | output over-voltage |
Supplemental safety measures | : | Auto shut-off when vehicle is fully charged | Charging will be stopped when Emergency Stop Button is pressed |
Width | : | 507,507 mm ,mm |
Height | : | 860 mm |
Depth | : | 250 mm |
Network communications protocol | : | TCP/IP |
Network communications | : | 10/100 Base-T Ethernet |
Degree of protection | : | IP54 | IK10 |
Cooling System | : | Forced air cooling (no air filter) |
Relative humidity | : | 10% to 95% non-condensing |
DC cable length | : | Min. 4m |
Operating temperature | : | -20˚C to +50˚C (derating above + 35 ˚C) |
DC communication protocol standard | : | CHAdeMO |
DC connector type | : | CHAdeMO JEVS G105 |
DC output power | : | 24kW max. |
DC output current | : | 65A max. |
DC output voltage | : | 150 – 530V DC |
Efficiency | : | 95% |
Power factor | : | > 0.99 |
Input wiring | : | Three phase + N + PE |
Number of phases | : | Three |
Rated frequency | : | 50 Hz |
Nominal input current | : | 40A |
Input voltage | : | 380-480V AC |
RFID Card | : | Mifare 1K |
Communication Protocol with Central System | : | OCCP 1.6 or equivalent |
Card Reader | : | 13.56 MHz |
Card Reader Standards | : | ISO 14443A |