Renderoc FC is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious mortar. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives to provide a material with good handling characteristics, while minimising water demand. The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings.
Uses
Renderoc FC is designed to fill minor imperfections concrete and masonry surfaces and can be applied as a fairing coat. Surface imperfections up to 3 mm in depth can be filled with a scrape coat application. Voids of greater depth should be separately filled as a prior operation. Renderoc FC can also be used in association with other Renderoc mortars. Under normal conditions, the product does not require an independent primer or curing membrane.
Advantages
- Easy to use - no independent primer or curing membrane necessary
- Excellent bond to the concrete substrate
- Pre-blended to overcome site-batched variations - only the site addition of clean water is required
- Contains no chloride admixtures
Renderoc FC is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious mortar. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives to provide a material with good handling characteristics, while minimising water demand. The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings.
Uses
Renderoc FC is designed to fill minor imperfections concrete and masonry surfaces and can be applied as a fairing coat. Surface imperfections up to 3 mm in depth can be filled with a scrape coat application. Voids of greater depth should be separately filled as a prior operation. Renderoc FC can also be used in association with other Renderoc mortars. Under normal conditions, the product does not require an independent primer or curing membrane.
Advantages
- Easy to use - no independent primer or curing membrane necessary
- Excellent bond to the concrete substrate
- Pre-blended to overcome site-batched variations - only the site addition of clean water is required
- Contains no chloride admixtures
Renderoc FC is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious mortar. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives to provide a material with good handling characteristics, while minimising water demand. The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings.
Uses
Renderoc FC is designed to fill minor imperfections concrete and masonry surfaces and can be applied as a fairing coat. Surface imperfections up to 3 mm in depth can be filled with a scrape coat application. Voids of greater depth should be separately filled as a prior operation. Renderoc FC can also be used in association with other Renderoc mortars. Under normal conditions, the product does not require an independent primer or curing membrane.
Advantages
- Easy to use - no independent primer or curing membrane necessary
- Excellent bond to the concrete substrate
- Pre-blended to overcome site-batched variations - only the site addition of clean water is required
- Contains no chloride admixtures
Hong Kong SAR
Australia
Indonesia
Malaysia
New Zealand
Philippines
Singapore
