- Hong Kong SAR
Halmburger Floor Heating System
Germany
Structure of EVTW double core heating cable Patent technology: ZL03252675.X, CT04-0767 1. Heating wire: multi-stranded polymer 2. Cold wire: tin-plated copper stranded wire 0.5mm2 (16*0.2mm) 3. Insulator: Silicone Rubber (RDP-G) 4. Insulator: Polyvinyl chloride (Y type), wall thickness 0.8mm 5. Moisture-resistant layer: PET polyester film 6. Earth wire: copper stranded wire 32*0.20mm (1.00mm2) 7. Shield layer: aluminum foil composite (impedance 0.10 Ω / m) 8. Outer protection sheath layer: polyvinyl chloride (Y type), wall thickness 0.8mm, Outer diameter Ø 6.9mm 9. Tensile reinforcement: DuPont fiber Safety Guaranteed Halmburger’s Temperature Limiter acts as the Double protection mechanism – auto switch the power to a safe state when overheating occurs. High Efficiency The Aluminum foil composite shielding layer improves thermal conductivity by acting as insulator against magnetic and radio frequency emission associated with electrical cables, thus reduces waiting time of floor heating. Enhanced Water Resistance PET moisture protection layer Included two-layered polyester PET protective layers for enhanced water resistance. Suitable for use in bathrooms and high humidity environment. Reduce Humidity Level Solution to the spring humid climate – When room temperature increases by 1 °c, the relative humidity level drops by 4-5%. It can further prevent the growth of mold, bacteria, and improve skin and respiratory allergies. Test result - The floor heating system is the solution to the high air humidity during rainy seasons around Spring and Summer. When the room temperature increases by 1 °c, the relative humidity level drops by 4-5%. - This can also prevent the growth of mildew and mold and improves skin and respiratory allergies. - Furthermore, moisture will be heated up through the floor to balance the overall space humidity. This avoid cold and humid air from sinking to the ground. Installation Floor heating configurative 1. Thermostat (86 boxes) 2. Temperature limiter (double link box) 3. Hot and cold wire cable pipes 4. Temperature limiter copper sleeve 5. Tiles, marble finishes 6. Cement sand screed 7. Reinforced net 8. Thermal insulation layer 9. Bare slab surface
Structure of EVTW double core heating cable Patent technology: ZL03252675.X, CT04-0767 1. Heating wire: multi-stranded polymer 2. Cold wire: tin-plated copper stranded wire 0.5mm2 (16*0.2mm) 3. Insulator: Silicone Rubber (RDP-G) 4. Insulator: Polyvinyl chloride (Y type), wall thickness 0.8mm 5. Moisture-resistant layer: PET polyester film 6. Earth wire: copper stranded wire 32*0.20mm (1.00mm2) 7. Shield layer: aluminum foil composite (impedance 0.10 Ω / m) 8. Outer protection sheath layer: polyvinyl chloride (Y type), wall thickness 0.8mm, Outer diameter Ø 6.9mm 9. Tensile reinforcement: DuPont fiber Safety Guaranteed Halmburger’s Temperature Limiter acts as the Double protection mechanism – auto switch the power to a safe state when overheating occurs. High Efficiency The Aluminum foil composite shielding layer improves thermal conductivity by acting as insulator against magnetic and radio frequency emission associated with electrical cables, thus reduces waiting time of floor heating. Enhanced Water Resistance PET moisture protection layer Included two-layered polyester PET protective layers for enhanced water resistance. Suitable for use in bathrooms and high humidity environment. Reduce Humidity Level Solution to the spring humid climate – When room temperature increases by 1 °c, the relative humidity level drops by 4-5%. It can further prevent the growth of mold, bacteria, and improve skin and respiratory allergies. Test result - The floor heating system is the solution to the high air humidity during rainy seasons around Spring and Summer. When the room temperature increases by 1 °c, the relative humidity level drops by 4-5%. - This can also prevent the growth of mildew and mold and improves skin and respiratory allergies. - Furthermore, moisture will be heated up through the floor to balance the overall space humidity. This avoid cold and humid air from sinking to the ground. Installation Floor heating configurative 1. Thermostat (86 boxes) 2. Temperature limiter (double link box) 3. Hot and cold wire cable pipes 4. Temperature limiter copper sleeve 5. Tiles, marble finishes 6. Cement sand screed 7. Reinforced net 8. Thermal insulation layer 9. Bare slab surface
Structure of EVTW double core heating cable
Patent technology: ZL03252675.X, CT04-0767
1. Heating wire: multi-stranded polymer
2. Cold wire: tin-plated copper stranded wire 0.5mm2 (16*0.2mm)
3. Insulator: Silicone Rubber (RDP-G)
4. Insulator: Polyvinyl chloride (Y type), wall thickness 0.8mm
5. Moisture-resistant layer: PET polyester film
6. Earth wire: copper stranded wire 32*0.20mm (1.00mm2)
7. Shield layer: aluminum foil composite (impedance 0.10 Ω / m)
8. Outer protection sheath layer: polyvinyl chloride (Y type), wall thickness 0.8mm, Outer diameter Ø 6.9mm
9. Tensile reinforcement: DuPont fiber
Safety Guaranteed
Halmburger’s Temperature Limiter acts as the Double protection mechanism – auto switch the power to a safe state when overheating occurs.
High Efficiency
The Aluminum foil composite shielding layer improves thermal conductivity by acting as insulator against magnetic and radio frequency emission associated with electrical cables, thus reduces waiting time of floor heating.
Enhanced Water Resistance
PET moisture protection layer
Included two-layered polyester PET protective layers for enhanced water resistance.
Suitable for use in bathrooms and high humidity environment.
Reduce Humidity Level
Solution to the spring humid climate – When room temperature increases by 1 °c, the relative humidity level drops by 4-5%. It can further prevent the growth of mold, bacteria, and improve skin and respiratory allergies.
Test result
- The floor heating system is the solution to the high air humidity during rainy seasons around Spring and Summer. When the room temperature increases by 1 °c, the relative humidity level drops by 4-5%.
- This can also prevent the growth of mildew and mold and improves skin and respiratory allergies.
- Furthermore, moisture will be heated up through the floor to balance the overall space humidity. This avoid cold and humid air from sinking to the ground.
Installation
Floor heating configurative
1. Thermostat (86 boxes)
2. Temperature limiter (double link box)
3. Hot and cold wire cable pipes
4. Temperature limiter copper sleeve
5. Tiles, marble finishes
6. Cement sand screed
7. Reinforced net
8. Thermal insulation layer
9. Bare slab surface
Patent technology: ZL03252675.X, CT04-0767
1. Heating wire: multi-stranded polymer
2. Cold wire: tin-plated copper stranded wire 0.5mm2 (16*0.2mm)
3. Insulator: Silicone Rubber (RDP-G)
4. Insulator: Polyvinyl chloride (Y type), wall thickness 0.8mm
5. Moisture-resistant layer: PET polyester film
6. Earth wire: copper stranded wire 32*0.20mm (1.00mm2)
7. Shield layer: aluminum foil composite (impedance 0.10 Ω / m)
8. Outer protection sheath layer: polyvinyl chloride (Y type), wall thickness 0.8mm, Outer diameter Ø 6.9mm
9. Tensile reinforcement: DuPont fiber
Safety Guaranteed
Halmburger’s Temperature Limiter acts as the Double protection mechanism – auto switch the power to a safe state when overheating occurs.
High Efficiency
The Aluminum foil composite shielding layer improves thermal conductivity by acting as insulator against magnetic and radio frequency emission associated with electrical cables, thus reduces waiting time of floor heating.
Enhanced Water Resistance
PET moisture protection layer
Included two-layered polyester PET protective layers for enhanced water resistance.
Suitable for use in bathrooms and high humidity environment.
Reduce Humidity Level
Solution to the spring humid climate – When room temperature increases by 1 °c, the relative humidity level drops by 4-5%. It can further prevent the growth of mold, bacteria, and improve skin and respiratory allergies.
Test result
- The floor heating system is the solution to the high air humidity during rainy seasons around Spring and Summer. When the room temperature increases by 1 °c, the relative humidity level drops by 4-5%.
- This can also prevent the growth of mildew and mold and improves skin and respiratory allergies.
- Furthermore, moisture will be heated up through the floor to balance the overall space humidity. This avoid cold and humid air from sinking to the ground.
Installation
Floor heating configurative
1. Thermostat (86 boxes)
2. Temperature limiter (double link box)
3. Hot and cold wire cable pipes
4. Temperature limiter copper sleeve
5. Tiles, marble finishes
6. Cement sand screed
7. Reinforced net
8. Thermal insulation layer
9. Bare slab surface
General Specification
Warranty | : | 10 Years |
Application | : | Prone-wet area (e.g. bathrooms and kitchens) |
Size
Diameter | : | Ø 6.9mm |
Technical
Operating Voltage | : | 220V/230V |
Output Power | : | 19.6w/m |
Maximum surface temperature | : | 90 ̊C |
Insulation | : | Silicone rubber Silicone rubber 2G |
Test voltage | : | 4000V |
Tensile strength | : | 849N |
Protection level | : | I |
Minimum installation temperature | : | +5 ̊C or more |
Protection current | : | 30mA |
Cable spacing | : | Spacing between cables shall not be less than 5cm |
Other Products You Might Like