This product is a special paint that gives off a variety of colors and appearances with two or more separated colors in a single coat and that has a painting and interior decoration effect by spray painting once.
Surface treatment :
1. The material should be sufficiently cured (cured more than 30 days at 20℃)
2. Laitance, dust, oil and other contaminants on the surface must be completely removed.
3. The proper pH of the material must be less than 9, and the percentage of moisture content must be less than 6%.
4. The gaps and grooves on the surface must be filled with exterior water-based putty, and surface adjustment should be made before coating.
Coating method :
1. Primer
① Please be sure to use the undercoat specified by this company because poor adhesion may occur depending on the product. Use a water-based coloring agent for toning.
2. Intermediate coating
① Apply after adjusting the nozzle diameter to 3~5㎜ and injection pressure to 2.5~3kgf/㎠ and checkingthe pattern shape and size.
② Make sure that the gun is perpendicular to the object to be coated during coating, and apply to the wide side in the edges and corners.
3. Top Coat
① Apply a top coat clear paint to prevent contamination and improve durability.
② Apply NMC-E or NMC-EF once after the intermediate coating material has completely dried.
This product is a special paint that gives off a variety of colors and appearances with two or more separated colors in a single coat and that has a painting and interior decoration effect by spray painting once.
Surface treatment :
1. The material should be sufficiently cured (cured more than 30 days at 20℃)
2. Laitance, dust, oil and other contaminants on the surface must be completely removed.
3. The proper pH of the material must be less than 9, and the percentage of moisture content must be less than 6%.
4. The gaps and grooves on the surface must be filled with exterior water-based putty, and surface adjustment should be made before coating.
Coating method :
1. Primer
① Please be sure to use the undercoat specified by this company because poor adhesion may occur depending on the product. Use a water-based coloring agent for toning.
2. Intermediate coating
① Apply after adjusting the nozzle diameter to 3~5㎜ and injection pressure to 2.5~3kgf/㎠ and checkingthe pattern shape and size.
② Make sure that the gun is perpendicular to the object to be coated during coating, and apply to the wide side in the edges and corners.
3. Top Coat
① Apply a top coat clear paint to prevent contamination and improve durability.
② Apply NMC-E or NMC-EF once after the intermediate coating material has completely dried.
This product is a special paint that gives off a variety of colors and appearances with two or more separated colors in a single coat and that has a painting and interior decoration effect by spray painting once.
Surface treatment :
1. The material should be sufficiently cured (cured more than 30 days at 20℃)
2. Laitance, dust, oil and other contaminants on the surface must be completely removed.
3. The proper pH of the material must be less than 9, and the percentage of moisture content must be less than 6%.
4. The gaps and grooves on the surface must be filled with exterior water-based putty, and surface adjustment should be made before coating.
Coating method :
1. Primer
① Please be sure to use the undercoat specified by this company because poor adhesion may occur depending on the product. Use a water-based coloring agent for toning.
2. Intermediate coating
① Apply after adjusting the nozzle diameter to 3~5㎜ and injection pressure to 2.5~3kgf/㎠ and checkingthe pattern shape and size.
② Make sure that the gun is perpendicular to the object to be coated during coating, and apply to the wide side in the edges and corners.
3. Top Coat
① Apply a top coat clear paint to prevent contamination and improve durability.
② Apply NMC-E or NMC-EF once after the intermediate coating material has completely dried.