This paint is a non-solvent-based epoxy paint based on the epoxy-modified amine resin, which can form a strong dry film. It is excellent in adhesion, appearance, durability and chemical resistance, and airless spraying is possible. In particular, since 500㎛-thick coating is possible with one coat, and the smoothness of the film is good, it is a premium non-solvent-based epoxy lining paint that is suitable as a concrete floor paint.
HOW TO USE
Surface treatment1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.
Coating method :
1. Reinforce cracks, crevices, and joints between walls and floors with an epoxy putty after pirmer.
2. Add the hardener to the base and use after evenly mixing for 3-5 minutes with a power stirrer.
3. Apply uniformly with airless equipment.
Appropriate construction specifications
▷Primer : CLEANPOXY CLEAR PRIMER, CLEANPOXY PENETRATE PRIMER DNY-200
▷Lining : CLEANPOXY DHDC-6400(S)
▷Top coat : CLEANPOXY 3100, CLEANPOXY COATING, DHDC-2740(if necessary)
Coating conditions :
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less, Moisture content in the concrete: 6% or less
2. Please note that due to the nature of epoxy paint, discoloration and chalking may occur if exposed to the outdoor environment.
3. Injection pressure : More than 3000 psi(210kgf/㎠)
4. The use of a thinner more than the recommended amount causes a further delay in drying, decline in hardness, whitening, skid marks, etc.
This paint is a non-solvent-based epoxy paint based on the epoxy-modified amine resin, which can form a strong dry film. It is excellent in adhesion, appearance, durability and chemical resistance, and airless spraying is possible. In particular, since 500㎛-thick coating is possible with one coat, and the smoothness of the film is good, it is a premium non-solvent-based epoxy lining paint that is suitable as a concrete floor paint.
HOW TO USE
Surface treatment1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.
Coating method :
1. Reinforce cracks, crevices, and joints between walls and floors with an epoxy putty after pirmer.
2. Add the hardener to the base and use after evenly mixing for 3-5 minutes with a power stirrer.
3. Apply uniformly with airless equipment.
Appropriate construction specifications
▷Primer : CLEANPOXY CLEAR PRIMER, CLEANPOXY PENETRATE PRIMER DNY-200
▷Lining : CLEANPOXY DHDC-6400(S)
▷Top coat : CLEANPOXY 3100, CLEANPOXY COATING, DHDC-2740(if necessary)
Coating conditions :
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less, Moisture content in the concrete: 6% or less
2. Please note that due to the nature of epoxy paint, discoloration and chalking may occur if exposed to the outdoor environment.
3. Injection pressure : More than 3000 psi(210kgf/㎠)
4. The use of a thinner more than the recommended amount causes a further delay in drying, decline in hardness, whitening, skid marks, etc.
This paint is a non-solvent-based epoxy paint based on the epoxy-modified amine resin, which can form a strong dry film. It is excellent in adhesion, appearance, durability and chemical resistance, and airless spraying is possible. In particular, since 500㎛-thick coating is possible with one coat, and the smoothness of the film is good, it is a premium non-solvent-based epoxy lining paint that is suitable as a concrete floor paint.
HOW TO USE
Surface treatment1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.
Coating method :
1. Reinforce cracks, crevices, and joints between walls and floors with an epoxy putty after pirmer.
2. Add the hardener to the base and use after evenly mixing for 3-5 minutes with a power stirrer.
3. Apply uniformly with airless equipment.
Appropriate construction specifications
▷Primer : CLEANPOXY CLEAR PRIMER, CLEANPOXY PENETRATE PRIMER DNY-200
▷Lining : CLEANPOXY DHDC-6400(S)
▷Top coat : CLEANPOXY 3100, CLEANPOXY COATING, DHDC-2740(if necessary)
Coating conditions :
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less, Moisture content in the concrete: 6% or less
2. Please note that due to the nature of epoxy paint, discoloration and chalking may occur if exposed to the outdoor environment.
3. Injection pressure : More than 3000 psi(210kgf/㎠)
4. The use of a thinner more than the recommended amount causes a further delay in drying, decline in hardness, whitening, skid marks, etc.