This paint is a three-component flooring material for concrete that is composed of a base, a hardener and powder by using the binding between polyurethane resin and inorganic powder. It is a non-solvent type eco-friendly product with excellent physical performance in terms of abrasion resistance, chemical resistance and impact resistance as well as excellent boiling water resistance compared to other flooring materials. About a 4㎜ thick coating can be formed by one coat, and smoothness and workability are excellent. In particular, it can be used for concrete floors in a state where the water content is temporarily high.
Surface treatment :
1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.
3. Please repair severe bumps or cracks with a paste of intermediate coating material.
Coating method :
1. Apply smoothly using sawtooth scraper, rubber scraper, pitchfork, square towel, etc.
2. Remove air bubbles inside the coating by using a spike roller simultaneously with painting.
Appropriate construction specifications
▷Primary coating: To prevent air bubbles, primary coating is done by applying a thickness of about 1㎜.
▷Secondary coating: Spread out evenly using sawtooth scraper, rubber scraper, and pitchfork, and discharge the air inside the matrix using a spike roller.
Coating conditions :
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less
2. Moisture content in the concrete: 6% or less
This paint is a three-component flooring material for concrete that is composed of a base, a hardener and powder by using the binding between polyurethane resin and inorganic powder. It is a non-solvent type eco-friendly product with excellent physical performance in terms of abrasion resistance, chemical resistance and impact resistance as well as excellent boiling water resistance compared to other flooring materials. About a 4㎜ thick coating can be formed by one coat, and smoothness and workability are excellent. In particular, it can be used for concrete floors in a state where the water content is temporarily high.
Surface treatment :
1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.
3. Please repair severe bumps or cracks with a paste of intermediate coating material.
Coating method :
1. Apply smoothly using sawtooth scraper, rubber scraper, pitchfork, square towel, etc.
2. Remove air bubbles inside the coating by using a spike roller simultaneously with painting.
Appropriate construction specifications
▷Primary coating: To prevent air bubbles, primary coating is done by applying a thickness of about 1㎜.
▷Secondary coating: Spread out evenly using sawtooth scraper, rubber scraper, and pitchfork, and discharge the air inside the matrix using a spike roller.
Coating conditions :
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less
2. Moisture content in the concrete: 6% or less
This paint is a three-component flooring material for concrete that is composed of a base, a hardener and powder by using the binding between polyurethane resin and inorganic powder. It is a non-solvent type eco-friendly product with excellent physical performance in terms of abrasion resistance, chemical resistance and impact resistance as well as excellent boiling water resistance compared to other flooring materials. About a 4㎜ thick coating can be formed by one coat, and smoothness and workability are excellent. In particular, it can be used for concrete floors in a state where the water content is temporarily high.
Surface treatment :
1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.
3. Please repair severe bumps or cracks with a paste of intermediate coating material.
Coating method :
1. Apply smoothly using sawtooth scraper, rubber scraper, pitchfork, square towel, etc.
2. Remove air bubbles inside the coating by using a spike roller simultaneously with painting.
Appropriate construction specifications
▷Primary coating: To prevent air bubbles, primary coating is done by applying a thickness of about 1㎜.
▷Secondary coating: Spread out evenly using sawtooth scraper, rubber scraper, and pitchfork, and discharge the air inside the matrix using a spike roller.
Coating conditions :
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less
2. Moisture content in the concrete: 6% or less
Hong Kong SAR
Australia
Indonesia
Malaysia
New Zealand
Philippines
Singapore
Hong Kong 
