Sika AnchorFix®-3030

Application

:

Indoor | Outdoor

Chemical Base

:

Epoxy resin

Colour

:

Part A: Off white | Part B: Grey | A + B Mixed: Light grey

Product type

:

Epoxy

Shelf Life

:

24 months from date of production

Storage Conditions

:

Must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +10 °C and +25 °C

Usage

:

Structural work: Rebar/ steel reinforcement anchoring in new & refurbishment works | Threaded rods | Bolts & special fastening/ fixing systems | Metalwork, carpentry: Handrails, balustrades & supports | Railings | Window & door frames, Substrates: Concrete (Cracked & un-cracked) | Hollow and solid masonry | Wood | Natural & reconstituted stone | Solid rock

Packaging

:

585 ml dual cartridge: 12 cartridges per box | Pallet: 56 boxes with 672 cartridges

Ambient Air Temperature

:

+5 °C minimum/ +40 °C maximum

Compressive Strength

:

~95 N/ mm² (7 days, +20 °C) (ASTM D 695)

Density

:

A + B mixed: ~1.5 kg/ l

ETA For Anchoring In Cracked Concrete

:

Yes

ETA For Post Installed Rebar Connections

:

Yes

Fire Resistant

:

Yes

Good Adhesion To Substrate

:

Yes

Layer Thicknes

:

~8 mm maximum

Low Emissions

:

Yes

Low Wastage

:

Yes

Mixing Ratio

:

Part A : Part B = 3 : 1 by volume

Product Temperature

:

+10 °C minimum/ +40 °C maximum

Sag Flow

:

Non-sag, including overhead

Seismic Tested (C1 & C2)

:

Yes

Service Temperature

:

Long term: -40 °C minimum/ +50 °C maximum | Short term (1 - 2 hours): +70 °C

Shrinkage-Free Hardening

:

Yes

Standard Sealant Guns Can Be Used (300 ml Cartridge)

:

Yes

Styrene-Free

:

Yes

Substrate Temperature

:

+5 °C minimum/ +40 °C maximum

Suitable For Contact With Drinking Water

:

Yes

Tensile Strength

:

~23 N/ mm² (7 days, +20 °C) (ASTM D 638)

Tensile Strength In Flexure

:

~45 N/ mm² (7 days, +20 °C) (ASTM D 790)

Certification

:

ISO 14001 SGS | ISO 9001 SGS