- Hong Kong SAR
Notes™ Panels
United States
Made in the USA Freight will be accurately calculated at checkout. - Production on your order begins immediately. - Most of our designs are made to order and typically ship in 3 - 10 business days. - Orders over 50 panels may require additional lead time. - Minimum order is 6 panels. (Orders less than 6 panels may be not be fulfilled) - Panels arrive on a pallet. - Pallet jack or forklift recommended at receiving end. - Commercial Grade, 32" by 32" by 1.5" - Glass Reinforced Gypsum w/lightweight core. - Class A, NFPA 286 PASS - Steel reinforced joints. - Alignment tabs ensure accurate surface alignment. PANEL INSTALLATION: • PANELS must be screw mounted through the face directly to the substrate, typically drywall. Panels are not attached to studs. • All panel-to-panel edges are glued with approved adhesive as panels are mounted. The backs are not glued, only the panel edges. • Seams are filled with the approved spackling compound. • Seams are sanded. • Surface is sealed with the approved primer/sealer. • Desired finish paint is applied. Flat paint is recommended, and spray application provides the best results. To perform the installation of modularArts panels, we recommend that a finish carpenter or millworker mount and edge-glue the panels, and a drywall tradesperson address the seams. One man-hour per panel should be allowed to bring the installation to a paint-ready state. Drying time of adhesive is not included. Adhesive requires 24 hours to dry. Experience may certainly shorten labor time! A detailed Instruction Booklet will come with the panels.
Made in the USA Freight will be accurately calculated at checkout. - Production on your order begins immediately. - Most of our designs are made to order and typically ship in 3 - 10 business days. - Orders over 50 panels may require additional lead time. - Minimum order is 6 panels. (Orders less than 6 panels may be not be fulfilled) - Panels arrive on a pallet. - Pallet jack or forklift recommended at receiving end. - Commercial Grade, 32" by 32" by 1.5" - Glass Reinforced Gypsum w/lightweight core. - Class A, NFPA 286 PASS - Steel reinforced joints. - Alignment tabs ensure accurate surface alignment. PANEL INSTALLATION: • PANELS must be screw mounted through the face directly to the substrate, typically drywall. Panels are not attached to studs. • All panel-to-panel edges are glued with approved adhesive as panels are mounted. The backs are not glued, only the panel edges. • Seams are filled with the approved spackling compound. • Seams are sanded. • Surface is sealed with the approved primer/sealer. • Desired finish paint is applied. Flat paint is recommended, and spray application provides the best results. To perform the installation of modularArts panels, we recommend that a finish carpenter or millworker mount and edge-glue the panels, and a drywall tradesperson address the seams. One man-hour per panel should be allowed to bring the installation to a paint-ready state. Drying time of adhesive is not included. Adhesive requires 24 hours to dry. Experience may certainly shorten labor time! A detailed Instruction Booklet will come with the panels.
Made in the USA
Freight will be accurately calculated at checkout.
- Production on your order begins immediately.
- Most of our designs are made to order and typically ship in 3 - 10 business days.
- Orders over 50 panels may require additional lead time.
- Minimum order is 6 panels. (Orders less than 6 panels may be not be fulfilled)
- Panels arrive on a pallet.
- Pallet jack or forklift recommended at receiving end.
- Commercial Grade, 32" by 32" by 1.5"
- Glass Reinforced Gypsum w/lightweight core.
- Class A, NFPA 286 PASS
- Steel reinforced joints.
- Alignment tabs ensure accurate surface alignment.
PANEL INSTALLATION:
• PANELS must be screw mounted through the face directly to the substrate, typically drywall. Panels are not attached to studs.
• All panel-to-panel edges are glued with approved adhesive as panels are mounted. The backs are not glued, only the panel edges.
• Seams are filled with the approved spackling compound.
• Seams are sanded.
• Surface is sealed with the approved primer/sealer.
• Desired finish paint is applied. Flat paint is recommended, and spray application provides the best results.
To perform the installation of modularArts panels, we recommend that a finish carpenter or millworker mount and edge-glue the panels, and a drywall tradesperson address the seams.
One man-hour per panel should be allowed to bring the installation to a paint-ready state. Drying time of adhesive is not included. Adhesive requires 24 hours to dry. Experience may certainly shorten labor time!
A detailed Instruction Booklet will come with the panels.
Freight will be accurately calculated at checkout.
- Production on your order begins immediately.
- Most of our designs are made to order and typically ship in 3 - 10 business days.
- Orders over 50 panels may require additional lead time.
- Minimum order is 6 panels. (Orders less than 6 panels may be not be fulfilled)
- Panels arrive on a pallet.
- Pallet jack or forklift recommended at receiving end.
- Commercial Grade, 32" by 32" by 1.5"
- Glass Reinforced Gypsum w/lightweight core.
- Class A, NFPA 286 PASS
- Steel reinforced joints.
- Alignment tabs ensure accurate surface alignment.
PANEL INSTALLATION:
• PANELS must be screw mounted through the face directly to the substrate, typically drywall. Panels are not attached to studs.
• All panel-to-panel edges are glued with approved adhesive as panels are mounted. The backs are not glued, only the panel edges.
• Seams are filled with the approved spackling compound.
• Seams are sanded.
• Surface is sealed with the approved primer/sealer.
• Desired finish paint is applied. Flat paint is recommended, and spray application provides the best results.
To perform the installation of modularArts panels, we recommend that a finish carpenter or millworker mount and edge-glue the panels, and a drywall tradesperson address the seams.
One man-hour per panel should be allowed to bring the installation to a paint-ready state. Drying time of adhesive is not included. Adhesive requires 24 hours to dry. Experience may certainly shorten labor time!
A detailed Instruction Booklet will come with the panels.
General Specification
Material facade | : | GRG (glass reinforced gypsum) |
Installation | : | Horizontal | Vertical |
Application | : | Wall | Drywall |
Features | : | Precast mount-points. Self-aligning edges with steel reinforced joints |
Size
Width | : | 32 |
Length | : | 32 |
Weight | : | 1.8 lbs/sqft |
Thickness | : | Minimum: ¼ |
Design Repeat | : | 32 |
Other Products You Might Like
Other Products You Might Like