High Range Water Reducer –Superplasticiser
EUCON 25 M is a high range water-reducing admixture. It may be added to the concrete at the job site or at the ready mix concrete plant. EUCON 25 M is formulated to retain plastic consistency for 30-60 minutes after dosing depending on the initial slumps, dosage rates, and ambient temperature. No chlorides are used in its formulation; consequently, it is recommended for prestressed concrete.
It is also compatible with air-entraining agents, waterproofing agents, calcium chloride and many other admixtures; however, each material should be added to the concrete separately.
Features:
•Produces low water content and low water/cement ratio concrete allowing higher strengths
• Produces flowing concrete with better than normal strengths
• Aids in concrete placement and reduces labour cost
• When used in precast work with Type I cement will produce the high early strengths
High Range Water Reducer –Superplasticiser
EUCON 25 M is a high range water-reducing admixture. It may be added to the concrete at the job site or at the ready mix concrete plant. EUCON 25 M is formulated to retain plastic consistency for 30-60 minutes after dosing depending on the initial slumps, dosage rates, and ambient temperature. No chlorides are used in its formulation; consequently, it is recommended for prestressed concrete.
It is also compatible with air-entraining agents, waterproofing agents, calcium chloride and many other admixtures; however, each material should be added to the concrete separately.
Features:
•Produces low water content and low water/cement ratio concrete allowing higher strengths
• Produces flowing concrete with better than normal strengths
• Aids in concrete placement and reduces labour cost
• When used in precast work with Type I cement will produce the high early strengths
High Range Water Reducer –Superplasticiser
EUCON 25 M is a high range water-reducing admixture. It may be added to the concrete at the job site or at the ready mix concrete plant. EUCON 25 M is formulated to retain plastic consistency for 30-60 minutes after dosing depending on the initial slumps, dosage rates, and ambient temperature. No chlorides are used in its formulation; consequently, it is recommended for prestressed concrete.
It is also compatible with air-entraining agents, waterproofing agents, calcium chloride and many other admixtures; however, each material should be added to the concrete separately.
Features:
•Produces low water content and low water/cement ratio concrete allowing higher strengths
• Produces flowing concrete with better than normal strengths
• Aids in concrete placement and reduces labour cost
• When used in precast work with Type I cement will produce the high early strengths