Protec 2000 is a brand name for Wednesbury Polyethylene coated copper tube, the inner surface of which is castellated to provide air gaps which run the length of the tube. These gaps trap air which forms a thermal barrier to reduce surface temperature, transmitted
noise and condensation levels, together with a reduction of heat loss when buried.
The copper tube coated with Polyethylene is to EN 1057. This standard specifies the requirements for copper tubes in straight length to half hard, hard
temper or coils in the annealed condition.
The tube is manufactured from phosphorus deoxidised (non arsenical) copper alloy CW024A and the plastic to BS 3412. Tube complying to these tables is suitable for hot and cold water services, gas services, sanitation and central heating. These tubes when plastic coated, will withstand temperatures of up to 95°C (203°F) with occasional peaks of up to 110°C (230°F). The plastic is tightly extruded on to the copper tube in a seamless and continuous run. It is durable and more effective than some other methods of protection against environments which may be aggressive to the copper tube.
APPROVAL
Wednesbury Tube EN1057 conforms to the requirements of the British Standards Institution and has earned the right to use the Kitemark as evidence of compliance of these tubes to the British Standard EN 1057 and have Registered Firm status to BS EN ISO 9001 : 2008 : FM 00452.
MARKING
Tube from 15mm to 28mm inclusive is permanently marked ‘Wednesbury STREAMLINE GB (Kitemark) EN 1057’at intervals of 1000mm. The copper tube is prominently die marked in a similar manner together with the date of manufacture, to the relevant Label.
JOINTING
These tubes are suitable for connecting by means of capillary or compression fittings to BS EN 1254, silver brazing, bronze or autogenous welding. When jointing cut the plastic and fold back (see photograph), make joint and return the plastic to its original position, cover split plastic and joint with an impervious plastic tape to give continuous protection.
Protec 2000 is a brand name for Wednesbury Polyethylene coated copper tube, the inner surface of which is castellated to provide air gaps which run the length of the tube. These gaps trap air which forms a thermal barrier to reduce surface temperature, transmitted
noise and condensation levels, together with a reduction of heat loss when buried.
The copper tube coated with Polyethylene is to EN 1057. This standard specifies the requirements for copper tubes in straight length to half hard, hard
temper or coils in the annealed condition.
The tube is manufactured from phosphorus deoxidised (non arsenical) copper alloy CW024A and the plastic to BS 3412. Tube complying to these tables is suitable for hot and cold water services, gas services, sanitation and central heating. These tubes when plastic coated, will withstand temperatures of up to 95°C (203°F) with occasional peaks of up to 110°C (230°F). The plastic is tightly extruded on to the copper tube in a seamless and continuous run. It is durable and more effective than some other methods of protection against environments which may be aggressive to the copper tube.
APPROVAL
Wednesbury Tube EN1057 conforms to the requirements of the British Standards Institution and has earned the right to use the Kitemark as evidence of compliance of these tubes to the British Standard EN 1057 and have Registered Firm status to BS EN ISO 9001 : 2008 : FM 00452.
MARKING
Tube from 15mm to 28mm inclusive is permanently marked ‘Wednesbury STREAMLINE GB (Kitemark) EN 1057’at intervals of 1000mm. The copper tube is prominently die marked in a similar manner together with the date of manufacture, to the relevant Label.
JOINTING
These tubes are suitable for connecting by means of capillary or compression fittings to BS EN 1254, silver brazing, bronze or autogenous welding. When jointing cut the plastic and fold back (see photograph), make joint and return the plastic to its original position, cover split plastic and joint with an impervious plastic tape to give continuous protection.
Protec 2000 is a brand name for Wednesbury Polyethylene coated copper tube, the inner surface of which is castellated to provide air gaps which run the length of the tube. These gaps trap air which forms a thermal barrier to reduce surface temperature, transmitted
noise and condensation levels, together with a reduction of heat loss when buried.
The copper tube coated with Polyethylene is to EN 1057. This standard specifies the requirements for copper tubes in straight length to half hard, hard
temper or coils in the annealed condition.
The tube is manufactured from phosphorus deoxidised (non arsenical) copper alloy CW024A and the plastic to BS 3412. Tube complying to these tables is suitable for hot and cold water services, gas services, sanitation and central heating. These tubes when plastic coated, will withstand temperatures of up to 95°C (203°F) with occasional peaks of up to 110°C (230°F). The plastic is tightly extruded on to the copper tube in a seamless and continuous run. It is durable and more effective than some other methods of protection against environments which may be aggressive to the copper tube.
APPROVAL
Wednesbury Tube EN1057 conforms to the requirements of the British Standards Institution and has earned the right to use the Kitemark as evidence of compliance of these tubes to the British Standard EN 1057 and have Registered Firm status to BS EN ISO 9001 : 2008 : FM 00452.
MARKING
Tube from 15mm to 28mm inclusive is permanently marked ‘Wednesbury STREAMLINE GB (Kitemark) EN 1057’at intervals of 1000mm. The copper tube is prominently die marked in a similar manner together with the date of manufacture, to the relevant Label.
JOINTING
These tubes are suitable for connecting by means of capillary or compression fittings to BS EN 1254, silver brazing, bronze or autogenous welding. When jointing cut the plastic and fold back (see photograph), make joint and return the plastic to its original position, cover split plastic and joint with an impervious plastic tape to give continuous protection.
Hong Kong SAR
Australia
Indonesia
Malaysia
New Zealand
Philippines
Singapore
