SLIMLINE Aluminium Roller Shutter was purposely designed to meet the requirements for the retail, hospitality, tourism, education and club markets to offer exceptional protection, strong functional security with aesthetic appeal.
SLIMLINE Aluminium Roller Shutter is often designed and specified for use in Fire Hose Reel Cupboards, Counter Tops, Bar Tops and Doorways.
SLIMLINE Aluminium Roller Shutters is easy to operate and requires minimal maintenance. The SLIMLINE Roller Shutter can be manually operated or motorised depending on the purpose or function.
SLIMLINE Aluminium Roller Shutter is a manufactured 43mm x 1.4mm aluminium extruded slat designed to suit openings up to 3.0 metres high and up to 3.0 metres wide for manual operation.
Recommended Specification SLIMLINE Aluminium Roller Shutter with 43mm x 1.4mm aluminium extruded slats, guides and bottom rail as manufactured by ARCO (Qld).
Curtain:
The curtain is constructed from 118mm x 1.4mm thick extruded aluminium. Both ends of the aluminium slat are fitted with specifically designed shaped nylon moulded end clips to reduce friction during operation and prevent lateral movement within the guides.
Curtain Options Available Constructed of 43mm x 1.4mm extruded aluminium slats and bottom rail joined together by nylon end clips. Nylon end clips are fitted to alternate slats to prevent lateral movement and provide smooth operation and long life performance free from lubrication.
For motorised operation a maximum measurement of 3000 mm high x 3000 mm wide.
An optional slotting is available to any number of slats. Vision panels can be slotted for ventilation or clear acrylic infill’s can be fitted to the slotted slats providing a dust seal.
Side Guides:
50mm x 33mm extruded aluminium with false back for concealed fixings. Optional Nylofelt Buffer is also available.
Locking:
Locking shall be centrally mounted, Two Way Mortise Key Lock or Sliding Shoot Bolt Locking mounted within the bottom rail (it can be inside or outside locking).
Optional waist high locking is also available.
If motorised, the standard application is to allow for one key switch (to be installed by others).
Bottom Rail:
Made from 90mm x 48mm extruded aluminum section incorporating locking device and concealed locking rods (for manual operation). An optional PVC Buffer is also available.
Roller Drum:
Manufactured from 203mm or 229mm diameter spiral ducted tube attached to self lubrication drum wheels and bearings rotating on a 34mm diameter steel shaft (for manual operation). The shaft shall be fitted with helical springs designed to counterbalance the curtain weight throughout its operation. The drum shall be designed to give minimum deflection over the span.
For motorised operation, the spiral weld is 229mm diameter and 38mm diameter steel shaft.
Mullions:
Made from 33mm x 120mm wide for inline two panel doors. For less than 180 degree angle, shall be two piece extruded aluminium section that can be set to any angle and can be applied for wide openings and multiple door installations. Mullions shall be “lift out type” with shoot bolts to base.
Special wide mullions are available and fabricated from aluminium sheet and used when two curtains meet an angle and no room is available for high stacking (please refer mullion details).
SLIMLINE Aluminium Roller Shutter was purposely designed to meet the requirements for the retail, hospitality, tourism, education and club markets to offer exceptional protection, strong functional security with aesthetic appeal.
SLIMLINE Aluminium Roller Shutter is often designed and specified for use in Fire Hose Reel Cupboards, Counter Tops, Bar Tops and Doorways.
SLIMLINE Aluminium Roller Shutters is easy to operate and requires minimal maintenance. The SLIMLINE Roller Shutter can be manually operated or motorised depending on the purpose or function.
SLIMLINE Aluminium Roller Shutter is a manufactured 43mm x 1.4mm aluminium extruded slat designed to suit openings up to 3.0 metres high and up to 3.0 metres wide for manual operation.
Recommended Specification SLIMLINE Aluminium Roller Shutter with 43mm x 1.4mm aluminium extruded slats, guides and bottom rail as manufactured by ARCO (Qld).
Curtain:
The curtain is constructed from 118mm x 1.4mm thick extruded aluminium. Both ends of the aluminium slat are fitted with specifically designed shaped nylon moulded end clips to reduce friction during operation and prevent lateral movement within the guides.
Curtain Options Available Constructed of 43mm x 1.4mm extruded aluminium slats and bottom rail joined together by nylon end clips. Nylon end clips are fitted to alternate slats to prevent lateral movement and provide smooth operation and long life performance free from lubrication.
For motorised operation a maximum measurement of 3000 mm high x 3000 mm wide.
An optional slotting is available to any number of slats. Vision panels can be slotted for ventilation or clear acrylic infill’s can be fitted to the slotted slats providing a dust seal.
Side Guides:
50mm x 33mm extruded aluminium with false back for concealed fixings. Optional Nylofelt Buffer is also available.
Locking:
Locking shall be centrally mounted, Two Way Mortise Key Lock or Sliding Shoot Bolt Locking mounted within the bottom rail (it can be inside or outside locking).
Optional waist high locking is also available.
If motorised, the standard application is to allow for one key switch (to be installed by others).
Bottom Rail:
Made from 90mm x 48mm extruded aluminum section incorporating locking device and concealed locking rods (for manual operation). An optional PVC Buffer is also available.
Roller Drum:
Manufactured from 203mm or 229mm diameter spiral ducted tube attached to self lubrication drum wheels and bearings rotating on a 34mm diameter steel shaft (for manual operation). The shaft shall be fitted with helical springs designed to counterbalance the curtain weight throughout its operation. The drum shall be designed to give minimum deflection over the span.
For motorised operation, the spiral weld is 229mm diameter and 38mm diameter steel shaft.
Mullions:
Made from 33mm x 120mm wide for inline two panel doors. For less than 180 degree angle, shall be two piece extruded aluminium section that can be set to any angle and can be applied for wide openings and multiple door installations. Mullions shall be “lift out type” with shoot bolts to base.
Special wide mullions are available and fabricated from aluminium sheet and used when two curtains meet an angle and no room is available for high stacking (please refer mullion details).
SLIMLINE Aluminium Roller Shutter was purposely designed to meet the requirements for the retail, hospitality, tourism, education and club markets to offer exceptional protection, strong functional security with aesthetic appeal.
SLIMLINE Aluminium Roller Shutter is often designed and specified for use in Fire Hose Reel Cupboards, Counter Tops, Bar Tops and Doorways.
SLIMLINE Aluminium Roller Shutters is easy to operate and requires minimal maintenance. The SLIMLINE Roller Shutter can be manually operated or motorised depending on the purpose or function.
SLIMLINE Aluminium Roller Shutter is a manufactured 43mm x 1.4mm aluminium extruded slat designed to suit openings up to 3.0 metres high and up to 3.0 metres wide for manual operation.
Recommended Specification SLIMLINE Aluminium Roller Shutter with 43mm x 1.4mm aluminium extruded slats, guides and bottom rail as manufactured by ARCO (Qld).
Curtain:
The curtain is constructed from 118mm x 1.4mm thick extruded aluminium. Both ends of the aluminium slat are fitted with specifically designed shaped nylon moulded end clips to reduce friction during operation and prevent lateral movement within the guides.
Curtain Options Available Constructed of 43mm x 1.4mm extruded aluminium slats and bottom rail joined together by nylon end clips. Nylon end clips are fitted to alternate slats to prevent lateral movement and provide smooth operation and long life performance free from lubrication.
For motorised operation a maximum measurement of 3000 mm high x 3000 mm wide.
An optional slotting is available to any number of slats. Vision panels can be slotted for ventilation or clear acrylic infill’s can be fitted to the slotted slats providing a dust seal.
Side Guides:
50mm x 33mm extruded aluminium with false back for concealed fixings. Optional Nylofelt Buffer is also available.
Locking:
Locking shall be centrally mounted, Two Way Mortise Key Lock or Sliding Shoot Bolt Locking mounted within the bottom rail (it can be inside or outside locking).
Optional waist high locking is also available.
If motorised, the standard application is to allow for one key switch (to be installed by others).
Bottom Rail:
Made from 90mm x 48mm extruded aluminum section incorporating locking device and concealed locking rods (for manual operation). An optional PVC Buffer is also available.
Roller Drum:
Manufactured from 203mm or 229mm diameter spiral ducted tube attached to self lubrication drum wheels and bearings rotating on a 34mm diameter steel shaft (for manual operation). The shaft shall be fitted with helical springs designed to counterbalance the curtain weight throughout its operation. The drum shall be designed to give minimum deflection over the span.
For motorised operation, the spiral weld is 229mm diameter and 38mm diameter steel shaft.
Mullions:
Made from 33mm x 120mm wide for inline two panel doors. For less than 180 degree angle, shall be two piece extruded aluminium section that can be set to any angle and can be applied for wide openings and multiple door installations. Mullions shall be “lift out type” with shoot bolts to base.
Special wide mullions are available and fabricated from aluminium sheet and used when two curtains meet an angle and no room is available for high stacking (please refer mullion details).
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
Australia 
