A high performance elastomeric joint sealant based on proven polyurethane elastomer technology. SILCOR® LM PU SEALANT is a neutral cure system that reacts on exposure to atmospheric moisture. When cured, it forms a durable waterproof seal, which makes it suitable for most applications.
Features
SILCOR® LM PU SEALANT has excellent adhesion to most surfaces including concrete, brickwork, natural and artificial stone, steel, aluminium, wood, ceramic tiles, rigid plastics and fibre cement sheet.
• Good UV resistance, long life
• Single-pack — no mixing
• Low modulus for high movement
• Total adhesion — no water tracking
• Hard wearing, permanently flexible
• Can be painted after full curing has occurred
Preparation
Surfaces must be sound, smooth and free from dust, laitance, loose matter, oil or other contaminants.
Good adhesion can be achieved on clean, dry, uncontaminated concrete, brickwork, timber, metals, ceramics and most coating surfaces without use of primers. However, adhesion to some surfaces may be improved by use of a primer. For any specific application needs contact your local GCP representative.
Application
Apply SILCOR® LM PU SEALANT using a manually or electrically operated closed-barrel caulking gun.
Insert bag into gun, cut top of the bag, replace end cap and use.
Extrude sealant firmly into joint to ensure complete contact on joint faces.
Smooth as required with a spatula and diluted detergent to give a flat or concave surface.
Compatibility
SILCOR® LM PU SEALANT is compatible with most membranes from GCP Applied Technologies as angle fillets, bond breaker, or gap filler before primer and membrane application, or to seal flashings and frames installed subsequently, including GCP polyurethane and polyurea membranes.
A high performance elastomeric joint sealant based on proven polyurethane elastomer technology. SILCOR® LM PU SEALANT is a neutral cure system that reacts on exposure to atmospheric moisture. When cured, it forms a durable waterproof seal, which makes it suitable for most applications.
Features
SILCOR® LM PU SEALANT has excellent adhesion to most surfaces including concrete, brickwork, natural and artificial stone, steel, aluminium, wood, ceramic tiles, rigid plastics and fibre cement sheet.
• Good UV resistance, long life
• Single-pack — no mixing
• Low modulus for high movement
• Total adhesion — no water tracking
• Hard wearing, permanently flexible
• Can be painted after full curing has occurred
Preparation
Surfaces must be sound, smooth and free from dust, laitance, loose matter, oil or other contaminants.
Good adhesion can be achieved on clean, dry, uncontaminated concrete, brickwork, timber, metals, ceramics and most coating surfaces without use of primers. However, adhesion to some surfaces may be improved by use of a primer. For any specific application needs contact your local GCP representative.
Application
Apply SILCOR® LM PU SEALANT using a manually or electrically operated closed-barrel caulking gun.
Insert bag into gun, cut top of the bag, replace end cap and use.
Extrude sealant firmly into joint to ensure complete contact on joint faces.
Smooth as required with a spatula and diluted detergent to give a flat or concave surface.
Compatibility
SILCOR® LM PU SEALANT is compatible with most membranes from GCP Applied Technologies as angle fillets, bond breaker, or gap filler before primer and membrane application, or to seal flashings and frames installed subsequently, including GCP polyurethane and polyurea membranes.
A high performance elastomeric joint sealant based on proven polyurethane elastomer technology. SILCOR® LM PU SEALANT is a neutral cure system that reacts on exposure to atmospheric moisture. When cured, it forms a durable waterproof seal, which makes it suitable for most applications.
Features
SILCOR® LM PU SEALANT has excellent adhesion to most surfaces including concrete, brickwork, natural and artificial stone, steel, aluminium, wood, ceramic tiles, rigid plastics and fibre cement sheet.
• Good UV resistance, long life
• Single-pack — no mixing
• Low modulus for high movement
• Total adhesion — no water tracking
• Hard wearing, permanently flexible
• Can be painted after full curing has occurred
Preparation
Surfaces must be sound, smooth and free from dust, laitance, loose matter, oil or other contaminants.
Good adhesion can be achieved on clean, dry, uncontaminated concrete, brickwork, timber, metals, ceramics and most coating surfaces without use of primers. However, adhesion to some surfaces may be improved by use of a primer. For any specific application needs contact your local GCP representative.
Application
Apply SILCOR® LM PU SEALANT using a manually or electrically operated closed-barrel caulking gun.
Insert bag into gun, cut top of the bag, replace end cap and use.
Extrude sealant firmly into joint to ensure complete contact on joint faces.
Smooth as required with a spatula and diluted detergent to give a flat or concave surface.
Compatibility
SILCOR® LM PU SEALANT is compatible with most membranes from GCP Applied Technologies as angle fillets, bond breaker, or gap filler before primer and membrane application, or to seal flashings and frames installed subsequently, including GCP polyurethane and polyurea membranes.
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
