Pivot sets provide the best possible means of hanging a door. The are designed to work with the laws of physics, pivots provide the perfect means of hanging a door.
-The weight of the door is supported at the bottom by the floor
-Reduced stress on frame
-Heavy-duty hardened steel spindles
-Offset pivots provide better weight distribution and can accomodate taller doors
-Intermediate pivots are used for alignment and to ensure proper installation of bottom pivot or floor closer
-Center hung pivots are used for aesthetics or if the pivot point is going to be moved nearer the lock edge of the door
-Pivot do not return doors to center. Pivots in this section are for door hanging means only. For door control see door closer catalog sections.
Product Description & Features
- Set consists of one H180 top pivot and two each M190 intermediate pivots
- Not available for fire door assemblies
- 3/4" (19mm) offset (measured from centerline of pivot to face of door)
- Door edges must be beveled 1/8" in 2"
- Doors will swing 180°, trim permitting
- Non-ferrous base material
- Doors 60" (1524mm) to 90" (2286mm) in height have two intermediate pivots. Each
additional 30" (762mm) of door height warrants another intermediate pivot
- Furnished with wood and machine screws
Pivot sets provide the best possible means of hanging a door. The are designed to work with the laws of physics, pivots provide the perfect means of hanging a door.
-The weight of the door is supported at the bottom by the floor
-Reduced stress on frame
-Heavy-duty hardened steel spindles
-Offset pivots provide better weight distribution and can accomodate taller doors
-Intermediate pivots are used for alignment and to ensure proper installation of bottom pivot or floor closer
-Center hung pivots are used for aesthetics or if the pivot point is going to be moved nearer the lock edge of the door
-Pivot do not return doors to center. Pivots in this section are for door hanging means only. For door control see door closer catalog sections.
Product Description & Features
- Set consists of one H180 top pivot and two each M190 intermediate pivots
- Not available for fire door assemblies
- 3/4" (19mm) offset (measured from centerline of pivot to face of door)
- Door edges must be beveled 1/8" in 2"
- Doors will swing 180°, trim permitting
- Non-ferrous base material
- Doors 60" (1524mm) to 90" (2286mm) in height have two intermediate pivots. Each
additional 30" (762mm) of door height warrants another intermediate pivot
- Furnished with wood and machine screws
Pivot sets provide the best possible means of hanging a door. The are designed to work with the laws of physics, pivots provide the perfect means of hanging a door.
-The weight of the door is supported at the bottom by the floor
-Reduced stress on frame
-Heavy-duty hardened steel spindles
-Offset pivots provide better weight distribution and can accomodate taller doors
-Intermediate pivots are used for alignment and to ensure proper installation of bottom pivot or floor closer
-Center hung pivots are used for aesthetics or if the pivot point is going to be moved nearer the lock edge of the door
-Pivot do not return doors to center. Pivots in this section are for door hanging means only. For door control see door closer catalog sections.
Product Description & Features
- Set consists of one H180 top pivot and two each M190 intermediate pivots
- Not available for fire door assemblies
- 3/4" (19mm) offset (measured from centerline of pivot to face of door)
- Door edges must be beveled 1/8" in 2"
- Doors will swing 180°, trim permitting
- Non-ferrous base material
- Doors 60" (1524mm) to 90" (2286mm) in height have two intermediate pivots. Each
additional 30" (762mm) of door height warrants another intermediate pivot
- Furnished with wood and machine screws
Hong Kong SAR
Australia
Indonesia
Malaysia
New Zealand
Philippines
Singapore
