-
Hong Kong SAR
Australia
Indonesia
Malaysia
New Zealand
Philippines
Singapore
General Specification
| Application | : | Indoor | Outdoor |
| Colour | : | Transparent yellow liquid (Mix A + B) |
| Product type | : | Epoxy resin |
| Shelf Life | : | 2 years in a cool place and indoors in its original closed container |
| Storage Conditions | : | Protect from direct sunlight and frost |
| Usage | : | injection resin with good adhesion to Concrete | Mortar | Stone | Steel | Wood |
Size
| Packaging | : | Part A: 6.67 kg | Part B: 3.33 kg |
Technical
| Coefficient Of Thermal Expansion | : | 8.9 x 10-5 per °C (Between -20 °C and + 40 °C) (EN ISO 1770) |
| Compressive Strength | : | 52 N/ mm² (At 7 days at +23 °C) (ASTM D695-96) |
| Density | : | 1.1 kg/ l |
| Does Not Contain Solvents | : | Yes |
| Hardening Without Retraction | : | Yes |
| High Adhesion And Mechanical Resistance | : | Yes |
| High Non-Brittle Hardness | : | Yes |
| It Can Be Applied On Dry Or Wet Surfaces | : | Yes |
| Low Viscosity Injectable With One-Component Systems | : | Yes |
| Modulus Of Elasticity In Flexure | : | 1800 N/ mm² (At 7 days at +23 °C) (DIN 53452) |
| Pot Life | : | Temperature: +5 °C | +10 °C | +23 °C | +30 °C | Potlife: ~120 minutes | ~80 minutes | ~25 minutes | ~10 minutes |
| Substrate Moisture Content | : | Dry or wet (SSS - Saturated Superficially Dry: No water dripping) |
| Substrate Temperature | : | +5 °C minimum/ +30 °C maximum |
| Tensile Adhesion Strength | : | In Concrete > 4 N/ mm² (Concrete failure) (At 7 days at + 23 °C) |
| Tensile Strength | : | 37 N/ mm² (At 7 days at +23 °C) (ISO 527) |
| Tensile Strength In Flexure | : | 61 N/ mm² (At 7 days at +23 °C) (DIN 53452) |
| Usable At Low Temperatures | : | Yes |
| Viscosity | : | Temperature: + 10 °C | + 20 °C | + 30 °C | Viscosity (mPa. s): ~1200 | ~430 | ~220 |
Certification
| Certification | : | ISO 14001 SGS | ISO 9001 SGS |
