Key Features :
> Withstands extreme weather conditions
> Panels are fully insulated with fire-retardant Rockwool insulation to withstand hot or cold weather conditions
> Panels are fire and heat resistant
> Panels never require painting
> Panels are easy to clean
> Insect resistant
> Steel skids provide flexibility and easy relocation from one project to another
Benefits ;
> Range of dimensions provides flexibility to suit your needs (available in 3m x 6m, 3m x 7m, 3m x 8m, 3m x 9m, 3m x 10m, 3m x 11m, 3m x 12m)
> Minimal maintenance needs reduce ongoing maintenance requirements and budget.
> Panels’ insulation value gives the highest R-values in the industry and a big savings in energy costs.
> Internal walls & ceilings are non-combustible insulated white PVC panels, giving the highest thermal resistance in the industry.
Standard: Skid Frame
> Heavy Duty Skid Type consisting of two longitudinal 250mm "I"-Beam Sized
> 150mm "I"-Beam cross-members
> 610mm or 350mm Extension on either end of building with G.I Grating
> 100mm BI Steel Pipes at each end for cable wrenching up on truck bed
> 2 Lifting points at each side (floor and roof) for crane lifting
Rolling: Chassis frame & running gear
> Heavy Duty Skid Type consisting of two longitudinal members
> "I"-Beam Skid Sized as required for Building Dimension
> Cross-members at two intermediate locations
> 2 Lifting points at each side for crane lifting
> 22 Ton Axle Set with Desert Travel Tires (11 Ton Axle – 2 sets)
> Tow hitch with Pentle Eye for towing
> Dual cranking jack at front of building
> Stabilizers at rear of building
OR
Base Frame /Floor System
> Heavy Duty Perimeter Type frame from 100mm x 100mm Box Tubing
> 50mm x 100mm box steel joists 610mm O.C with bridging
> 18mm Concrete Board Decking with .05mm steel underbelly
> 1.5mm Commercial Grade Sheet Vinyl
> Fiberglass flooring in Common Ablution, Kitchen & Freezer/Chiller Rooms
Walls
> Double 50mm x 100mm Steel Box Corner Posts
> 50mm x 100mm Columns at each side Roof Top Lifting Points
> 2mm Corrugated Steel Exterior Panels w/ full welded seams
> 64mm thick Interior white PVC panels insulated with Rockwool
> PVC U-Channel Base Trim anchored to floor for interior wall connections and flashings
> All steel grit blasted, primed and painted with 2-coats Epoxy paint on rolling models
Coatings
> Note that all steel components within building structure including walls, beams and skid frame are prepared & coated as follows:
- Grit Blasted, primed and painted
- Basecoat : 2-Pack Epoxy Primer
- Mid & Top Coat : 2-Pack Polyurethane
Roof
> Roofing, 64mm white PVC panels insulated with Rockwool, reinforced with internal metal stud framing as required
> 50mm x 100mm steel box beams installed at top lifting points & roof perimeter, welded to columns
> Roof Sealed with 2mm corrugated steel panel with full welded seams
> Additional ceiling beams installed as required ensuring O.C. maximum spacing
Doors Exterior
> Exterior doors - 32” x 80” steel doors with insulated core, complete with frame, threshold, weather stripping, nylon bungee cords, door closer, heavy duty lever type lockset and heavy duty hinges
Doors Interior
> Interior doors are 30” x 80” standard size with 24” x 80” for baths. Doors are prefinished hardboard exterior with honeycomb core, complete with cylindrical & privacy lockset
Windows
> Aluminum Framed, vertical sliding window, 25” x 27” standard all rooms
> All windows weather sealed and provided with removable insect screen
Electrical
> Voltage, Phase and Hz as per Customer requirements
> Copper stranded wires to all devices and fixtures with grounding system
> Interior fluorescent Light fixtures as required
> Weatherproof Incandescent Light at each exterior door
> Quick Disconnect exterior connectors on all panel boards
Plumbing
> All piping is supplied in Metric sizes and in accordance with modular camp building practices, surface mounted throughout
> Hot and Cold Water supply piping CPVC Spec DIN 8079/8080
> Drain Piping UPVC BS 4514
> Good Quality Fittings and Fixtures located as shown on Drawings
> Water heaters American manufactured, sized as required
> Metric to imperial coupling adaptors @ water & sewer connections can be provided if required and available upon request
Key Features :
> Withstands extreme weather conditions
> Panels are fully insulated with fire-retardant Rockwool insulation to withstand hot or cold weather conditions
> Panels are fire and heat resistant
> Panels never require painting
> Panels are easy to clean
> Insect resistant
> Steel skids provide flexibility and easy relocation from one project to another
Benefits ;
> Range of dimensions provides flexibility to suit your needs (available in 3m x 6m, 3m x 7m, 3m x 8m, 3m x 9m, 3m x 10m, 3m x 11m, 3m x 12m)
> Minimal maintenance needs reduce ongoing maintenance requirements and budget.
> Panels’ insulation value gives the highest R-values in the industry and a big savings in energy costs.
> Internal walls & ceilings are non-combustible insulated white PVC panels, giving the highest thermal resistance in the industry.
Standard: Skid Frame
> Heavy Duty Skid Type consisting of two longitudinal 250mm "I"-Beam Sized
> 150mm "I"-Beam cross-members
> 610mm or 350mm Extension on either end of building with G.I Grating
> 100mm BI Steel Pipes at each end for cable wrenching up on truck bed
> 2 Lifting points at each side (floor and roof) for crane lifting
Rolling: Chassis frame & running gear
> Heavy Duty Skid Type consisting of two longitudinal members
> "I"-Beam Skid Sized as required for Building Dimension
> Cross-members at two intermediate locations
> 2 Lifting points at each side for crane lifting
> 22 Ton Axle Set with Desert Travel Tires (11 Ton Axle – 2 sets)
> Tow hitch with Pentle Eye for towing
> Dual cranking jack at front of building
> Stabilizers at rear of building
OR
Base Frame /Floor System
> Heavy Duty Perimeter Type frame from 100mm x 100mm Box Tubing
> 50mm x 100mm box steel joists 610mm O.C with bridging
> 18mm Concrete Board Decking with .05mm steel underbelly
> 1.5mm Commercial Grade Sheet Vinyl
> Fiberglass flooring in Common Ablution, Kitchen & Freezer/Chiller Rooms
Walls
> Double 50mm x 100mm Steel Box Corner Posts
> 50mm x 100mm Columns at each side Roof Top Lifting Points
> 2mm Corrugated Steel Exterior Panels w/ full welded seams
> 64mm thick Interior white PVC panels insulated with Rockwool
> PVC U-Channel Base Trim anchored to floor for interior wall connections and flashings
> All steel grit blasted, primed and painted with 2-coats Epoxy paint on rolling models
Coatings
> Note that all steel components within building structure including walls, beams and skid frame are prepared & coated as follows:
- Grit Blasted, primed and painted
- Basecoat : 2-Pack Epoxy Primer
- Mid & Top Coat : 2-Pack Polyurethane
Roof
> Roofing, 64mm white PVC panels insulated with Rockwool, reinforced with internal metal stud framing as required
> 50mm x 100mm steel box beams installed at top lifting points & roof perimeter, welded to columns
> Roof Sealed with 2mm corrugated steel panel with full welded seams
> Additional ceiling beams installed as required ensuring O.C. maximum spacing
Doors Exterior
> Exterior doors - 32” x 80” steel doors with insulated core, complete with frame, threshold, weather stripping, nylon bungee cords, door closer, heavy duty lever type lockset and heavy duty hinges
Doors Interior
> Interior doors are 30” x 80” standard size with 24” x 80” for baths. Doors are prefinished hardboard exterior with honeycomb core, complete with cylindrical & privacy lockset
Windows
> Aluminum Framed, vertical sliding window, 25” x 27” standard all rooms
> All windows weather sealed and provided with removable insect screen
Electrical
> Voltage, Phase and Hz as per Customer requirements
> Copper stranded wires to all devices and fixtures with grounding system
> Interior fluorescent Light fixtures as required
> Weatherproof Incandescent Light at each exterior door
> Quick Disconnect exterior connectors on all panel boards
Plumbing
> All piping is supplied in Metric sizes and in accordance with modular camp building practices, surface mounted throughout
> Hot and Cold Water supply piping CPVC Spec DIN 8079/8080
> Drain Piping UPVC BS 4514
> Good Quality Fittings and Fixtures located as shown on Drawings
> Water heaters American manufactured, sized as required
> Metric to imperial coupling adaptors @ water & sewer connections can be provided if required and available upon request
Key Features :
> Withstands extreme weather conditions
> Panels are fully insulated with fire-retardant Rockwool insulation to withstand hot or cold weather conditions
> Panels are fire and heat resistant
> Panels never require painting
> Panels are easy to clean
> Insect resistant
> Steel skids provide flexibility and easy relocation from one project to another
Benefits ;
> Range of dimensions provides flexibility to suit your needs (available in 3m x 6m, 3m x 7m, 3m x 8m, 3m x 9m, 3m x 10m, 3m x 11m, 3m x 12m)
> Minimal maintenance needs reduce ongoing maintenance requirements and budget.
> Panels’ insulation value gives the highest R-values in the industry and a big savings in energy costs.
> Internal walls & ceilings are non-combustible insulated white PVC panels, giving the highest thermal resistance in the industry.
Standard: Skid Frame
> Heavy Duty Skid Type consisting of two longitudinal 250mm "I"-Beam Sized
> 150mm "I"-Beam cross-members
> 610mm or 350mm Extension on either end of building with G.I Grating
> 100mm BI Steel Pipes at each end for cable wrenching up on truck bed
> 2 Lifting points at each side (floor and roof) for crane lifting
Rolling: Chassis frame & running gear
> Heavy Duty Skid Type consisting of two longitudinal members
> "I"-Beam Skid Sized as required for Building Dimension
> Cross-members at two intermediate locations
> 2 Lifting points at each side for crane lifting
> 22 Ton Axle Set with Desert Travel Tires (11 Ton Axle – 2 sets)
> Tow hitch with Pentle Eye for towing
> Dual cranking jack at front of building
> Stabilizers at rear of building
OR
Base Frame /Floor System
> Heavy Duty Perimeter Type frame from 100mm x 100mm Box Tubing
> 50mm x 100mm box steel joists 610mm O.C with bridging
> 18mm Concrete Board Decking with .05mm steel underbelly
> 1.5mm Commercial Grade Sheet Vinyl
> Fiberglass flooring in Common Ablution, Kitchen & Freezer/Chiller Rooms
Walls
> Double 50mm x 100mm Steel Box Corner Posts
> 50mm x 100mm Columns at each side Roof Top Lifting Points
> 2mm Corrugated Steel Exterior Panels w/ full welded seams
> 64mm thick Interior white PVC panels insulated with Rockwool
> PVC U-Channel Base Trim anchored to floor for interior wall connections and flashings
> All steel grit blasted, primed and painted with 2-coats Epoxy paint on rolling models
Coatings
> Note that all steel components within building structure including walls, beams and skid frame are prepared & coated as follows:
- Grit Blasted, primed and painted
- Basecoat : 2-Pack Epoxy Primer
- Mid & Top Coat : 2-Pack Polyurethane
Roof
> Roofing, 64mm white PVC panels insulated with Rockwool, reinforced with internal metal stud framing as required
> 50mm x 100mm steel box beams installed at top lifting points & roof perimeter, welded to columns
> Roof Sealed with 2mm corrugated steel panel with full welded seams
> Additional ceiling beams installed as required ensuring O.C. maximum spacing
Doors Exterior
> Exterior doors - 32” x 80” steel doors with insulated core, complete with frame, threshold, weather stripping, nylon bungee cords, door closer, heavy duty lever type lockset and heavy duty hinges
Doors Interior
> Interior doors are 30” x 80” standard size with 24” x 80” for baths. Doors are prefinished hardboard exterior with honeycomb core, complete with cylindrical & privacy lockset
Windows
> Aluminum Framed, vertical sliding window, 25” x 27” standard all rooms
> All windows weather sealed and provided with removable insect screen
Electrical
> Voltage, Phase and Hz as per Customer requirements
> Copper stranded wires to all devices and fixtures with grounding system
> Interior fluorescent Light fixtures as required
> Weatherproof Incandescent Light at each exterior door
> Quick Disconnect exterior connectors on all panel boards
Plumbing
> All piping is supplied in Metric sizes and in accordance with modular camp building practices, surface mounted throughout
> Hot and Cold Water supply piping CPVC Spec DIN 8079/8080
> Drain Piping UPVC BS 4514
> Good Quality Fittings and Fixtures located as shown on Drawings
> Water heaters American manufactured, sized as required
> Metric to imperial coupling adaptors @ water & sewer connections can be provided if required and available upon request
Malaysia
Australia
Hong Kong SAR
Indonesia
New Zealand
Philippines
Singapore
