- Malaysia
AJIYA GALVANISED C & Z PURLIN
Malaysia
AJIYA C and Z sections are roll formed from high tensile zinc-coated steel. The cold roll forming process used in the manufacture of these sections ensures a high degree of consistency and accuracy in dimensions of the formed sections. GALVANISED STEEL C SECTION: The C-sections are normally used as simply supported. Sections of sufficient length may also be used continuously over 2 or more spans to reduce deflection. GALVANISED STEEL Z SECTION: The Z sections are all roll formed with one broad and one narrow flange. These flanges are proportioned so that two sections of the same size, when one is rotated 180′, can be end lapped. These lappings of the Zed sections over interior supports a multi-bay buildings produce a structurally continuous line of purlins or girts throughout the length of the building. The dual thickness of material over the interior supports increases the capacity of the sections to resist bending moments as well as improving the load capacity and stiffness of the system.
AJIYA C and Z sections are roll formed from high tensile zinc-coated steel. The cold roll forming process used in the manufacture of these sections ensures a high degree of consistency and accuracy in dimensions of the formed sections. GALVANISED STEEL C SECTION: The C-sections are normally used as simply supported. Sections of sufficient length may also be used continuously over 2 or more spans to reduce deflection. GALVANISED STEEL Z SECTION: The Z sections are all roll formed with one broad and one narrow flange. These flanges are proportioned so that two sections of the same size, when one is rotated 180′, can be end lapped. These lappings of the Zed sections over interior supports a multi-bay buildings produce a structurally continuous line of purlins or girts throughout the length of the building. The dual thickness of material over the interior supports increases the capacity of the sections to resist bending moments as well as improving the load capacity and stiffness of the system.
AJIYA C and Z sections are roll formed from high tensile zinc-coated steel. The cold roll forming process used in the manufacture of these sections ensures a high degree of consistency and accuracy in dimensions of the formed sections.
GALVANISED STEEL C SECTION:
The C-sections are normally used as simply supported. Sections of sufficient length may also be used continuously over 2 or more spans to reduce deflection.
GALVANISED STEEL Z SECTION:
The Z sections are all roll formed with one broad and one narrow flange. These flanges are proportioned so that two sections of the same size, when one is rotated 180′, can be end lapped.
These lappings of the Zed sections over interior supports a multi-bay buildings produce a structurally continuous line of purlins or girts throughout the length of the building.
The dual thickness of material over the interior supports increases the capacity of the sections to resist bending moments as well as improving the load capacity and stiffness of the system.
GALVANISED STEEL C SECTION:
The C-sections are normally used as simply supported. Sections of sufficient length may also be used continuously over 2 or more spans to reduce deflection.
GALVANISED STEEL Z SECTION:
The Z sections are all roll formed with one broad and one narrow flange. These flanges are proportioned so that two sections of the same size, when one is rotated 180′, can be end lapped.
These lappings of the Zed sections over interior supports a multi-bay buildings produce a structurally continuous line of purlins or girts throughout the length of the building.
The dual thickness of material over the interior supports increases the capacity of the sections to resist bending moments as well as improving the load capacity and stiffness of the system.
General Specification
Material | : | zinc-coated steel |
Type | : | Purlins |
Other Products You Might Like
Other Products You Might Like