ACRYLFLEX
Being elastomeric, it exhibits excellent recovery characteristics
Seamless membrane
Able to bridge cracks
QUICSEAL 103M ACRYLFLEX is a single component, ready-to-use, water-based liquid applied acrylic waterproof membrane. QUICSEAL 103M comprises of special bend of polymers, fillers and additives to provide excellent UV resistance, as well as providing long term waterproofing protection.
QUICSEAL 103M cures to form a tough, seamless, elastomeric waterproofing membrane with excellent adhesion to most substrates.
Uses :
Waterproofing of:
- concrete, metal, wood or clay-tiled roofs
- pitched roof with sufficient gradient to allow easy run-off
- concealing hairline cracks and shrinkage cracks less than 0.3 mm width
- external wall (seepage repair)
- protection of concrete against deterioration from effects of the UV rays
- expansion joints used in conjunction with QUICSEAL 209
Application :
Stir QUICSEAL 103M manually before application.
QUICSEAL 103M can be applied with roller, brush or spray equipment. Apply first coat of QUICSEAL 103M and whilst the membrane is still wet, immediately unroll the reinforcing mesh. Apply second coat of QUICSEAL 103M over the reinforcing mesh at coverage of 0.55 kg/m2 and roll over to ensure good wetting between the mesh and QUICSEAL 103M. Allow the second coat to dry for a minimum of 1-2 hours before continuing with the subsequent coat of QUICSEAL 103M. Apply the third coat of QUICSEAL 103M at right angles to the last coat and allow to dry.
ACRYLFLEX
Being elastomeric, it exhibits excellent recovery characteristics
Seamless membrane
Able to bridge cracks
QUICSEAL 103M ACRYLFLEX is a single component, ready-to-use, water-based liquid applied acrylic waterproof membrane. QUICSEAL 103M comprises of special bend of polymers, fillers and additives to provide excellent UV resistance, as well as providing long term waterproofing protection.
QUICSEAL 103M cures to form a tough, seamless, elastomeric waterproofing membrane with excellent adhesion to most substrates.
Uses :
Waterproofing of:
- concrete, metal, wood or clay-tiled roofs
- pitched roof with sufficient gradient to allow easy run-off
- concealing hairline cracks and shrinkage cracks less than 0.3 mm width
- external wall (seepage repair)
- protection of concrete against deterioration from effects of the UV rays
- expansion joints used in conjunction with QUICSEAL 209
Application :
Stir QUICSEAL 103M manually before application.
QUICSEAL 103M can be applied with roller, brush or spray equipment. Apply first coat of QUICSEAL 103M and whilst the membrane is still wet, immediately unroll the reinforcing mesh. Apply second coat of QUICSEAL 103M over the reinforcing mesh at coverage of 0.55 kg/m2 and roll over to ensure good wetting between the mesh and QUICSEAL 103M. Allow the second coat to dry for a minimum of 1-2 hours before continuing with the subsequent coat of QUICSEAL 103M. Apply the third coat of QUICSEAL 103M at right angles to the last coat and allow to dry.
ACRYLFLEX
Being elastomeric, it exhibits excellent recovery characteristics
Seamless membrane
Able to bridge cracks
QUICSEAL 103M ACRYLFLEX is a single component, ready-to-use, water-based liquid applied acrylic waterproof membrane. QUICSEAL 103M comprises of special bend of polymers, fillers and additives to provide excellent UV resistance, as well as providing long term waterproofing protection.
QUICSEAL 103M cures to form a tough, seamless, elastomeric waterproofing membrane with excellent adhesion to most substrates.
Uses :
Waterproofing of:
- concrete, metal, wood or clay-tiled roofs
- pitched roof with sufficient gradient to allow easy run-off
- concealing hairline cracks and shrinkage cracks less than 0.3 mm width
- external wall (seepage repair)
- protection of concrete against deterioration from effects of the UV rays
- expansion joints used in conjunction with QUICSEAL 209
Application :
Stir QUICSEAL 103M manually before application.
QUICSEAL 103M can be applied with roller, brush or spray equipment. Apply first coat of QUICSEAL 103M and whilst the membrane is still wet, immediately unroll the reinforcing mesh. Apply second coat of QUICSEAL 103M over the reinforcing mesh at coverage of 0.55 kg/m2 and roll over to ensure good wetting between the mesh and QUICSEAL 103M. Allow the second coat to dry for a minimum of 1-2 hours before continuing with the subsequent coat of QUICSEAL 103M. Apply the third coat of QUICSEAL 103M at right angles to the last coat and allow to dry.
Malaysia
Australia
Hong Kong SAR
Indonesia
New Zealand
Philippines
Singapore
