Rapid Drying Self-levelling Smoothing
Can be applied by trowel or pump
Strong - high compressive strength
ARDEX K 15 is an advanced sub-floor smoothing compound. It is virtually tension free and is designed to rapidly level and smooth hard sub-floors prior to applying a floor finish. Used in conjunctionwith either ARDEX P 82 or ARDEX P 51 primers, ARDEX K 15 can be applied to old sub-floors, e.g.floor screeds and other hard and rigid bases. ARDEX K 15 is a grey powder consisting of special cements and high quality synthetic resins. When mixed with water, a fluid, self-levelling mortar is produced which can be applied from a feather edge up to the required thickness in one operation. For thicknesses greater than 10mm, incorporate ARDEX Aggregate in the mixed mortar. ARDEX K 15 can normally be walked on after approximately 2hours at 20°C and dries and hardens rapidly so that even thick applications are ready to receive floorcoverings within one day at 20°C.
Floor coverings:
- Linoleum, vinyl, carpet
- Ceramic and quarry tiles
- Timber floors (contact ARDEX Technical Services)
Substrates:
- New, existing or rough screeded concrete
- Rain damaged concrete which has been mechanically prepared
- Existing quarry and ceramic tile
- Steel decking (contact ARDEX Technical Services)
- Timber floors (contact ARDEX Technical Services)
- Damp or moisture vulnerable concrete when used in conjunction with an ARDEX moisture control system
Rapid Drying Self-levelling Smoothing
Can be applied by trowel or pump
Strong - high compressive strength
ARDEX K 15 is an advanced sub-floor smoothing compound. It is virtually tension free and is designed to rapidly level and smooth hard sub-floors prior to applying a floor finish. Used in conjunctionwith either ARDEX P 82 or ARDEX P 51 primers, ARDEX K 15 can be applied to old sub-floors, e.g.floor screeds and other hard and rigid bases. ARDEX K 15 is a grey powder consisting of special cements and high quality synthetic resins. When mixed with water, a fluid, self-levelling mortar is produced which can be applied from a feather edge up to the required thickness in one operation. For thicknesses greater than 10mm, incorporate ARDEX Aggregate in the mixed mortar. ARDEX K 15 can normally be walked on after approximately 2hours at 20°C and dries and hardens rapidly so that even thick applications are ready to receive floorcoverings within one day at 20°C.
Floor coverings:
- Linoleum, vinyl, carpet
- Ceramic and quarry tiles
- Timber floors (contact ARDEX Technical Services)
Substrates:
- New, existing or rough screeded concrete
- Rain damaged concrete which has been mechanically prepared
- Existing quarry and ceramic tile
- Steel decking (contact ARDEX Technical Services)
- Timber floors (contact ARDEX Technical Services)
- Damp or moisture vulnerable concrete when used in conjunction with an ARDEX moisture control system
Rapid Drying Self-levelling Smoothing
Can be applied by trowel or pump
Strong - high compressive strength
ARDEX K 15 is an advanced sub-floor smoothing compound. It is virtually tension free and is designed to rapidly level and smooth hard sub-floors prior to applying a floor finish. Used in conjunctionwith either ARDEX P 82 or ARDEX P 51 primers, ARDEX K 15 can be applied to old sub-floors, e.g.floor screeds and other hard and rigid bases. ARDEX K 15 is a grey powder consisting of special cements and high quality synthetic resins. When mixed with water, a fluid, self-levelling mortar is produced which can be applied from a feather edge up to the required thickness in one operation. For thicknesses greater than 10mm, incorporate ARDEX Aggregate in the mixed mortar. ARDEX K 15 can normally be walked on after approximately 2hours at 20°C and dries and hardens rapidly so that even thick applications are ready to receive floorcoverings within one day at 20°C.
Floor coverings:
- Linoleum, vinyl, carpet
- Ceramic and quarry tiles
- Timber floors (contact ARDEX Technical Services)
Substrates:
- New, existing or rough screeded concrete
- Rain damaged concrete which has been mechanically prepared
- Existing quarry and ceramic tile
- Steel decking (contact ARDEX Technical Services)
- Timber floors (contact ARDEX Technical Services)
- Damp or moisture vulnerable concrete when used in conjunction with an ARDEX moisture control system